28th International Conference on Advanced Ceramics and Composites B, Volume 25, Issue 4

Herausgeber: Lara-Curzio, Edgar; Readey, Michael J

• Broschiertes Buch

Produktbeschreibung

A collection of Papers Presented at the 28th International Conference and Exposition on Advanced Ceramics and Composites held in conjunction with the 8th International Symposium on Ceramics in Energy Storage and Power Conversion Systems.

---

Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.

Produktdetails

• Verlag: Wiley
• Seitenzahl: 653
• Erscheinungstermin: 9. April 2004
• Englisch
• Abmessung: 229mm x 152mm x 36mm
• Gewicht: 907g
• ISBN-13: 9780470051528
• ISBN-10: 0470051523
• Artikelnr.: 24510464

Autorenporträt

Edgar Lara-Curzio is a Distinguished Research Staff Member and the leader of the Mechanical Properties and Mechanics Group at Oak Ridge National Laboratory. Since 1999 he has been serving as leader of the Mechanical Characterization and Analysis User Center in ORNL's High Temperature Materials Laboratory. Lara-Curzio received a B.Sc. degree in Engineering Physics from the Metropolitan University in Mexico City in 1986 and a Ph.D. in Materials Engineering from Rensselaer Polytechnic Institute, Troy NY, in 1992. His research work has been focused on studying the mechanical behavior, durability and reliability of structural and functional materials, on understanding the relationships among their processing, microstructure and properties, studying the effect of service environment on their properties and on developing models to describe their behavior and to predict their service life. Dr. Lara-Curzio has been serving as chairman of ASTM sub-committee C28.07 on Ceramic Matrix Composites since 1999. Since 1995 he has been serving as co-chair of the Coordination Group on Test Methods for Ceramic Matrix Composites for the Military Handbook-17 and since 1998 as leader of Working Groups WG20 and WG21 of Technical Committee 206 on Advanced Ceramics of the International Standards Organization. Dr. Lara-Curzio is currently serving as associate editor of the Journal of the American Ceramic Society and as member of the International Materials Review Committee of ASM International. He is also the current chair-elect of the American Ceramics Society's Engineering Ceramics Division. Dr. Lara-Curzio is a fellow of ASTM. He was the recipient of ASTM's Award of Merit in 2001 and ASTM's Advanced Ceramics Award in 2002. He has also received four ASTM Awards of Appreciation for authoring and leading the development of ASTM standard test methods. In 2003 he received the American Ceramic Society's Richard M. Fulrath Award for significant contributions to ceramic science and technology and served as Program Chair for the 30th International Conference for Advanced Ceramics and Materials held in Cocoa Beach, Florida, January 22-27, 2006. Dr. Lara-Curzio is a member of Alpha Sigma Mu, the Metallurgical Honorary Society. Dongming Zhu is a senior Materials Research Engineer at Army Research Laboratory, Vehicle Technology Directorate, and Durability and Protective Coatings Branch of Structures and Materials Division, at NASA Glenn Research Center. His expertise covers the areas of thermal conductivity, lattice defects and transport, high temperature oxidation, high-heat-flux testing, and mechanical behavior of ceramic coating systems, with an emphasis on experimental investigation and analytical modeling of processing, thermal fatigue and fracture behavior of advanced protective coatings and composites. His major contributions include the development of low conductivity thermal barrier coatings for turbine airfoil applications, 1650°C thermal/environmental barrier coatings for SiC/SiC ceramic matrix composite turbine vane and combustor liner applications. He has authored more than 100 archival publications and three patents. He is a member of the American Ceramic Society and ASM, International, has been a lead organizer for several International Symposia. He is currently the Chair-elect of the Engineering Ceramic Division of the American Ceramic Society, and an associate editor of the International Journal of Applied Ceramic Technology. He has received several awards from NASA and professional societies. He received his Ph.D. degree in Chemical Engineering and Materials Science from the University of Minnesota in 1996.

Inhaltsangabe

Preface.
MECHANICAL PROPERTIES OF ENGINEERING CERAMICS, COMPOSITES AND AEROSPACE
MATERIALS.
Properties of Rare Earth Oxynitride Glasses and the Implications for High
Temperature Behaviour of Silicon Nitride Ceramics (S. Hampshire and M. J.
Pomeroy).
Mechanical Properties of Porous Silicon Nitride From Fine/Coarse Powder
Mixture (M. Ishizaki, M. Ando, N. Kondo and T. Ohji).
Production and Characterization of Ultra Refractory HfB2-SiC Composites (F.
Monteverde and A. Bellosi).
Sintering Behaviour of Dense Nanocrystalline Zirconia Ceramics: A
Comparative Investigation (M. Wolff, G. Falk and R. Clasen).
Direct Evaluation of Local Thermal Conduction in Silicon Nitrides with
Enhanced Grain Growth (A. Okada and T. Hori).
Mechanical Properties of Pressureless Sintered SiC-AIN Composites Obtained
Without Sintering Bed (C. Magnani and L. Beaulardi).
The Influence of Beta Eucryptite Glassceramics on the Structure and Main
Properties of Alumina Ceramics (J. A. Geodakyan, A. K. Kostanyan, K. J.
Geodakyan, S. T. Sagatelyan and B. V. Petrosyan).
Mechanical Behaviour of SiC-Polycrystalline Fiber-Bounded-Ceramics (S.
Kajii, K. Matsunaga, M. Sato and T. Ishikawa).
Design, Manufacture and Quality Assurance of C/C-SiC Composites for Space
Transportation Systems (W. Krenkel, J. L. Hausherr, T. Reimer and M.
Frieß).
Effect of Fabrication Process on Internal Friction of SiC/SiC Composites
(H. Serizawa, S. Sato, H. Araki, T. Noda and A. Kohyama).
Effect on Interphase on Transthickness Tensile Strength of High Purity
Silicon Carbide Composites (T. Hinoki, Y. Maki, A. Kohyama, E. Lara-Curzio
and L. L. Snead).
Through-Thickness Properties of 2D Woven SiC/SiC Panels with Various
Microstructures (H. M. Yun and J. A. Carlo).
An Assessment of Variability in the Average Tensile Properties of a
Melt-Infiltrated SiC/SiC Composite (S. Kalluri, A. M. Calomino and D. N.
Brewer).
Net Shape Manufacturing of Fabric Reinforced Oxide/Oxide Components via
Resin Transfer Moulding and Pyrolysis (B. Heidenreich, W. Krenkel, M. Frieß
and H. Gedon).
In Situ Reaction Deposition Coating of LaPO4 ON Al2O3 Fabric Cloth for Al2
O3/Al2)O3 Composites (T. Yano, P. Lee and M. Imai).
Effect of Alkali Choice on Geopolymer Properties (W. M. Kriven and J. L.
Bell).
Thermal Shock Resistance of NEXTEL(TM)610 and NEXTEL(TM)720 Continuous
Fiber-Reinforced Mullite Matrix Composites (R. A. Simon and P. Supanic).
Tensile Properties of Nextel(TM) 720-Based Tows and Minicomposites
Subjected to High Temperature Soaking (D. M. Pai, S. Yarmolenko, B.
Kailasshankar, C. Murphy, J. Sankar and L. P. Zawada).
Effect of Monazite Coating on Tensile Behavior of Nextel(TM) 720 Fibers at
High Temperature (D. M. Pai, S. Yarmolenko, E. Freeman, J. Sankar and L. P.
Zawada).
BN Interphase Processed by LP-CVD from Tris(Dimethylamino) Borane and
Characterized Using SiC/SiC Minicomposites (S. Jacques, B. Bonnetor, M. -P.
Berthet and H. Vincent).
Oxidation Kinetics and Strength Degradation of Carbon Fibers in a Cracked
Ceramic Matrix Composite (M. C. Habig).
Mechanical Behavior and Oxidation-Resistance of an Orthogonal 3D δ-SIC
Fiber/Carbon Matrix Composite (T. Aoki, T. Ogasawara and T. Ishikawa).
Mechanical Properties of Ceramic Matrix Composites Exposed to Rig Tests (G.
Y. Richardson, C. S. Lei and R. N. Singh).
Composition and Microstructural Design for Improved Wear Properties in
SiAION Ceramics (M. I. Jones, K. Hirao, Y. Yamauchi and H. Hyuga).
Plasma-Treated Silicon Nitrides Exhibiting Ultra-Low Friction (A. Okada, T.
Hori, K. Ueoka and J. Ye).
Tribiological Properties of Si2N4 / Si3N4-BN Alternate Layered Composites
(T. Hirao, K. Hirao and Y. Yamauchi).
A Motorcycle Brake System with C/C-SiC Composite Brake Discs (Z. Stadler,
M. Kermc, T. Kosma-, and A. Dakskobler).
The Tribological Property Effect of Graphite Within a Composite Pad-Cost
Iron Baking System (S. Ramouse).
High Performance C/C-SiC Brake Pads (W. Krenkel, H. A. El-Hija and M.
Kriescher).
Sliding Contact Damage of Y- α/β Composite SiALON Ceramics (W. Kanematsu,
M. I. Jones and K. Hirao).
Processing and Wear Behavior of Cr-Al2O3-ZrO2 and Mo-Al2)3-ZrO2 Composites
(R. Janssen, S. Scheppokat, G. De Portu, R. Hannink and N. Claussen).
Improving Performance of Polycrystalline Diamond Components in Three Cone
Roller Bits Uisng Bibrous Monolith Technology (A. Griffo and D. Belnap).
Enhancement of the Fracture Resistance on SiC Fiber (Nicalon(TM))/SiC
Refractory Composites (T. Tanaka, H. Ichikawa, S. Fukumaru and H. Abe).
Critical Frontal Process Zone Evaluation of Aluminum Titanate/Aluminia
Based Ceramics by SEVNB Technique (C. -H. Chen and H. Awaji).
Atomistic Study of Crack Propagation Near the Cu(111)/Al2O3(0001) Interface
(S. V. Dmitriev, N. Yoshikawa, M. Hasegawa, Y. Kagawa, M. Kohyama and S.
Tanaka).
Sensitivity of Silicon Carbide and Other Ceramics to Edge Fracture: Method
and Results (G. Gogotsi, S. Mudrik and A. Rendtel).
Determination of Elastic Properties of a Ceramic-Based Joint Using a
Digital Image Correlation Method (M. Puyo-Pain and J. Lamon).
Evaluation of Four Different Experimental Techniques for Determination of
Elastic Properties of Solids (M. Radovic, E. Lara-Curzio and L. Riester).
Strength Testing System for Ceramic Grains (K. Breder, E. Lara-Curzio and
L. Riester).
Characterization of C/Enhanced SiC Composite During Creep Rupture Tests
Using an Ultrasonic Guided Wave Scan System (D. J. Roth, M. J. Verrilli, R.
E. Martin and L. M. Cosgriff).
Design of a High Temperature Test Device for Bidirectional Loading for CMC
Samples (I. Fischer, T. Reimer and H. Weihs).
Biaxial Strength Test of Discs of Different Size Using the Ball on Three
Balls Test (A. Börger, R. Danzer and P. Supancic).
Atomic Force Microscopy Study of the Surface Degradation Mechanisms of
Zirconia Based Ceramics (S. Deville, J. Chevalier, G. Fantozzi, J. F.
Bartolomé and J. S. Moya).
Internal Pressure Testing of Structural Ceramics Tubes (R. H. Carter and J.
J. Swab).
Characterization of Si³N4 Bars Extracted From Various Regions of a Billet
by Resonance and Flex Testing (G. Ojard, M. Ferber, T. Barnett and K.
Johnson).
Laser Scattering Characterization of Subsurface Defect/Damage in
Silicon-Nitride Ceramic Valves (J. G. Sun, J. M. Zhang and M. J. Andrews).
A Model for the Bulk Mechanical Response of Porous Ceramics Exhibiting a
Ferroelectric-to-Antiferroelectric Phase Transition During Hydrostatic
Compression (S. T. Montgomery and D. H. Zeuch).
Random Local Load Sharing in Multifilament Bundles: Modeling and Influence
on Ceramic Matrix Composite Failure (V. Calard and J. Lamon).
Experimental and Numerical Fluid Structure Investigations of a Generic
Bodyflap Region Model (R. Schaefer, A. Mack, B. Esser and A. Guelhan).
ADVANCED CERAMIC COATINGS FOR STRUCTURAL, ENVIRONMENTAL AND FUNCTIONAL
APPLICATIONS.
Ultra-High-Temperature Tribometer up to 1600°C (M. Gienau, N. Kelling, N.
Köhler and M. Woydt).
Erosion of Bare and Coated Polymer Matrix Composites by Solid Particle
Impingement (K. Miyoshi, J. K. Sutter, R. A. Horan, S. K. Naik and R. J.
Cupp).
The Effect of Thermal Mismatch on Stresses, Morphology and Failures in
Thermal Barrier Coatings (J. Shi, S. Darzens and A. M. Karlsson).
Mechanically Induced Delamination Cracking in Thermal Barrier Composites
(T. Wakui, J. Malzbender, E. Wessel, R. W. Steinbrech and L. Singheiser).
Investigation of Thermal Fatigue Life of Thermal Barrier Coating (Y. Ohtake
and T. Natsumura).
Evaluation of Two New Thermal Barrier Coating Materials Produced by APS and
EB-PVD (B. Saruhan, U.Schultz, R. Vassen, G. Pracht, P. Bengtsson, C.
Friedrich, R. Knoedler, O. Lavigne, P. Moretto, C. Siry, F. Taricco, N.
Coignard and R. Wing).
Low Thermal Conductivity Ceramics for Turbine Blade Thermal Barrier Coating
Application (U. Schulz, B. Saint-Ramond, O. Lavigne, P. Moretto, A.
vanLieshout and A. Berger).
Solution Precursor Plasma Spray: A Promising New Technique for Forming
Functional Nanostructured Films and Coatings (X. Ma, J. Roth, T. D. Xiao,
L. D. Xie, M. Gell, E. H. Jordan and N. P. Padture).
Further Improvement of the Properties of Sprayed TBC Using Hollow PSZ
Spheres (G. Bertrand, P. Roy, C. Meunier, M. Mévrel and D. Demange).
Effect of Bond Coat Surface Roughness and Pre-Oxidation on the Thermal
Cycling Lifetime of Thermal Barrier Coatings (J. Liu and Y. H. Sohn).
Chemical Etching of Silicon Carbide Ceramic Surface in Chlorine-Containing
Gas Mixtures (A. V. Zinovev, J. F. Moore, J. Hryn, O. Auciello, J. Carlisle
and M. J. Pellin).
Micromechanisms Affecting Macroscopic Deformation of Plasma-Sprayed TBCs
(E. Trunova, R. Herzog, T. Wakui, R. W. Steinbrech, E. Wessel and L.
Singheiser).
Stability of Silicon Nitride Coated with Lutetium Disilicate in an
Oxidative Environment (T. Suetsuna, M. Ando, M. Ishizaki, T. Ohji and M.
Asayama).
Effect of Scattering on the Combined Reflection and Thermal Radiation
Emission of a Typical Semitransparent TBC Material (C. M. Spuckler).
Behavior of Sputter Deposited Aluminia Thin Films Under Subcritical
Hydrothermal Condition (S. T. Park and R. H. Baney).
Stability and Performance of High Emissivity Coatings for Radiation Coupled
Thermionic Converters (P. N. Clark, B. H. C. Chen, W. H. Robertson and H.
H. Streckert).
Functionally Graded CVD Mullite Environmental Barrier Coatings (S. N. Basu
and V. K. Sarin).
Corrosion Mechanism of Lu2Si2O7 Phase in Static State Water Vapor
Environment (S. Ueno, D. D. Jayaseelan, N. Kondo, T, Ohji and S. Kanzaki).
Examination of Fracture Process and Environmental Resistance of Ceramic
Matrix Composites (SiC/SiC) (M. Okada, I. Yuri, T. Hisamatsu, A. Nitta, T.
Kameda and Y. Yasutomi).
Corrosion of Ceramic Materials in Hot Gas Environment (H. Klemm, M. Fritsch
and B. Schenk).
Optimizing Cu-Cr Coatings for Environmental Protection of Copper Alloys (L.
Ogbuji).
Characterization of Y2O3-Doped La2Zr2O7 Based EB-PVD Thermal Barrier
Coatings Using X-Ray Microtomography (CMT) and Small Angle Neutron
Scattering (SANS) (B. Saruhan, A. Flores Renteria, A. Kulkarni, F. DeCarlo
and J. Ilavsky).
Growth of Thermally Grown Oxide on (Ni,Pt)Al Bondcoat During Short Term
Oxidation (S. Laxman, Y. H. Sohn and K. S. Murphy).
Measuring and Modeling Residual Stresses in Air Plasma Spray Thermal
Barrier Coatings (X. Chen, J. Price and J. Ahmad).
Formation of Environmental Barrier Coating on Si3N4 by Gas Pressure
Sintering (D. D. Jayaseelan, S. Ueno, N. Kondo, T. Phji and S. Kanzaki).
BOMATERIALS AND BIOMEDICAL APPLICATIONS.
Wear of a Bioceramic Dental Restorative Material by Tooth Brushing (A.
Pallas, H. Engqvist, L. -Å. Lindén and L. Hermansson).
Depth-Profiling of Composition and Texture in Human Tooth Enamel - A
Functionally Graded Material (I. M. Low).
Morphologies of Precipitate in the Carbonate Plus Phosphate Aquenos
Solution (W. -Y. Huang and T. -S. Sheu).
Calcium Phosphate Ceramics as Substrate for Cartilage Cultivation (R.
Janssen, S. Nagel-Heyer, C. Goepfert, R. Pörtner, D. Toykan, O. Krummhauer,
M. Morlock, P. A. Adamietz, N. M. Meenen, W. M. Kriven, D. -K. Kim, A.
Tampieri and G. Gelotti).
Resorbable Polymer Ceramic Composites for Orthopedic Scaffold Applications
(R. Vaidyanathan, B. Hecht, A. Studley, T. Phillips and P. D. Calvert).
Nanoceramics as Drug Delivery Carriers (W. M. Kriven, S. -Y. Kwak, R. B.
Clarkson, B. E. Kitchell, M. A. Wallig and J. -H. Choy).
Chemical Processing of Brushite its Conversion to Apatite OR CasP2O7 (A.
Cuneyt Tas and S. B. Bhaduri).
Chemical Interactions Between Ca-Aluminate Implants and Bone (H. Engqvist,
M. Couillard, G. A. Botton, N. Axén, N. O. Ahnfelt and L. Hermansson).
Fabrication of Novel Hydroxyapatite/Titanium Composite Coating using rf
Reactive Plasma Spraying (Y. Yokogawa, M. Inagaki and T. Kameyama).
Manufacturing of Ceramic Dental Components by Means of Electrophoretic
Deposition (C. Oetzel, J. Tabellion and R. Clasen).
New and Conventional Simulated Body Fluids (H. Takadama, M. T. Hashimoto,
Y. Takigawa, M. Mizuno and T. Kokubo).
Scratch Testing of a Dental Restorative Material Based on Calcium Aluminate
(A. Pallas, H. Engqvist, S. Jacobsson and L. Hermansson).
NANOMATERIALS AND BIOMIMETICS.
Near-Shape Manufacturing of Complex Silica Glasses by Electrophoretic
Deposition of Mixtures of Nanosized and Coarser Particles (J. Tabellion and
R. Clasen).
Alumina Ceramics by Means of Electrophoretic Deposition of Submicron
Powders (A. Braun, M. Wolff, C. Oetzel, J. Tabellion, G. Falk and R.
Clasen).
Influence of the Synthesis Temperature on the Crystallization Path and
Kinetics of YAG Powders (P. Palmero, L. Montanaro, C. Esnouf and G.
Fantozzi).
High Strenth SiSIC Ceramics Derived From Wood Powders (A. Hofenauer, O.
Treusch, F. Tröger, M. Gahr, J. Schmidt, G. Wegener, W. Krenkel and J.
Fromm).
Development of Screen Printable Sensors with Templated Mesoporous Silica
(A. Lindqvist, M. Arenö and E. Carlström).
Synthesis and Characterization of Sol-Gel Derived Nanostructured Composite
of ZnO/PVP Thin Film as Biosensor (T. Du, H. Song and O. J. Ilgebusi).
Microwave Plasma Chemical Vapor Deposition (CVD) of Carbon Based Films in
the System C-N (R. Ramamurti, R. S. Kukreja, L. Guo, V. Shanov and R. N.
Singh).
Manufacturing of Thick Layers Made From Nanosized SiO2 Powders by
Dip-Coating (G. Fehringer and R. Clasen).
Mechanical Properties of Ni Embedded Alumina Nanocomposite Thin Films (S.
Neralla, D. Kumar, S. Yamolenko and J. Sankar).
Synthesis and Crystal Phase Evaluation of Hydroxylapatite Using the
Rietveld Maximum Entropy Method (A. V. Chaves de Andrade, J. C. Zurita da
Silva, C. O. Paiva-Santos, C. Weber, V. Hizau dos Santos Utuni, S. Mazurek
Tebcherani, C. P. Ferreira Borges, E. da Costa and S. Martinez Manent).
Processing and Hardness of an Al2O3-MgAl2O4 Nanocomposite (B. W. McEnerney,
G. Quinn, V. A. Greenhut, R. K. Sadangi, V. Shukla, B. Kear and D. E.
Niesz).