Martin Brennan

A Practical Approach to Quantitative Metal Analysis of Organic Matrices

• Gebundenes Buch

Produktbeschreibung

There has been significant expansion in the application of atomic spectrographic techniques in recent years, which has brought with it the need to provide more flexible methods to a wider range of samples, particularly non aqueous samples. This book compares the traditional and improved methods in the analysis of non aqueous samples for elemental analyses by atomic emission spectroscopic methods whilst describing procedures that will attempt to improve sample preparation methods.

---

Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.

Produktdetails

• Verlag: Wiley & Sons
• 1. Auflage
• Seitenzahl: 276
• Erscheinungstermin: 20. Oktober 2008
• Englisch
• Abmessung: 249mm x 168mm x 20mm
• Gewicht: 674g
• ISBN-13: 9780470031971
• ISBN-10: 0470031972
• Artikelnr.: 23333440

Autorenporträt

Dr Martin Brennan is an analytical scientist of 30 years standing with considerable experience in atomic spectroscopy. He has a M.Sc. in analytical science from Queens University, Belfast and a Ph.D in atomic spectroscopy and electroanalytical techniques from University College Cork, Ireland. He has considerable experience in the analysis of a wide range of samples particularly organic type samples and is currently employed with Henkel Ireland Ltd., manufacturers of adhesives and other organic compounds. He holds the position of Hon. Sec. of the Republic of Ireland sub-region Analytical Division of the Royal Society of Chemistry.

Inhaltsangabe

Preface xiii
Biography xv
Acknowledgements xvii
1 A Practical Approach to Quantitative Metal Analysis of Organic Matrices
Using ICP-OES 1
1.1 Introduction and Basic Overview 1
1.2 Schematic Representation of the Energies Generated by Atomic
Spectroscopic Methods 4
1.3 Excitation Energy (Quantum Theory and Atomic Spectra) 5
1.4 Ionisation Energy and Number of Excited Atoms 7
1.5 Width of Atomic Lines 9
1.5.1 Natural Broadening 9
1.5.2 Doppler Broadening 9
1.5.3 Lorentzian Broadening or Pressure Broadening 9
1.5.4 Holtsmark Broadening or Resonance Broadening 11
1.5.5 Field Broadening or Stark Broadening 11
1.5.6 Self-Absorption and Self-Reversal Broadening 11
1.6 Brief Summary of Atomic Spectroscopic Techniques Used for Elemental
Analysis 12
1.6.1 The Atomic Absorption Spectrophotometer 12
1.6.2 Atomic Fluorescence Spectroscopy 13
1.6.3 Direct Current Plasma Optical Emission Spectrometry (DCP-OES) 13
1.6.4 Microwave Induced Plasma (MIP) 14
1.6.5 Glow Discharge Optical Emission Spectrometry (GD-OES) 15
1.6.6 Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) 15
1.7 Summary: Applications of Atomic Spectroscopy 16
References 18
2 Instrumentations Associated with Atomic Spectroscopy 21
2.1 Instrumentation 21
2.2 Types of Plasma Sources 24
2.2.1 Direct Current Plasma Atomic Emission Spectrograph 25
2.2.2 Microwave Induced Plasma 25
2.2.3 Optical Emission Spectroscopy 26
2.3 Sample Introduction Systems 30
2.3.1 Mechanical Transfer of Sample/Standards Using Peristaltic Pump,
Pressure Valves, Motorised Syringes, etc. 31
2.3.2 Nebulisers 31
2.3.3 Brief Outline of Atomic Spectroscopy Hyphenated Systems 39
2.4 Spray Chambers 43
2.5 ICP-OES Torches 45
2.6 Optics 49
2.6.1 Grating Orders 51
2.7 Signal Detectors 53
2.7.1 Photomultiplier Tubes 53
2.7.2 Charge Coupled Devices 55
References 58
3 Methodologies of Metal Analysis of Organic Matrices Using ICP-OES 59
3.1 Sample Preparation Techniques and Methods of Analysis 59
3.2 Defining Goals 60
3.3 Steps in Chemical Analytical Protocol 61
3.4 Sampling and its Importance 62
3.5 Sample Preparation Methods 63
3.5.1 Direct Analysis of Organic Solutions 64
3.5.2 Sample Dissolution 65
3.5.3 Chemical Extraction of Metals from Organic Matrices 65
3.5.4 Dry Ashing without Retaining Aids 66
3.5.5 Dry Ashing with Retaining Aids 69
3.5.6 Acid Digestion Using Microwave Oven 69
3.5.7 Oxygen Bomb Flask Combustion (Low Pressure) 71
3.5.8 High Pressure Oxygen Combustion 72
3.5.9 Sample Preparation Using Fusion Methods 73
3.5.10 Analysis Using Slurry Solution Method 74
3.5.11 Sample Preparation Using Leaching Method 75
3.5.12 Sample Preparation Using a UV Digester 75
3.6 Non-Spectral Corrections Using ICP-OES 76
3.6.1 Effect of Solvents on ICP-OES 76
3.6.2 Effect of Viscosity on Signal Response 77
3.6.3 Comparison of Nebulisation Efficiency of Solvents Using ICP-OES 78
3.6.4 Choice of Carrier Liquid 80
3.7 Methodology of Measurement 81
3.7.1 Choice of Standard Materials 82
3.7.2 Quantitative Analysis Using Calibration Graph Method 82
3.7.3 Quantitative Analysis Using Standard Addition Method 85
3.7.4 Quantitative Analysis Using Internal Standard Method 87
3.7.5 Quantitative Analysis Using Matrix Matching Method 88
3.7.6 Quantitative Analysis Using Flow Injection Technique 89
3.8 Validation of an Analytical Method 90
3.8.1 Method Validation of Analysis of Organic Matrices 91
3.9 Control and Range Charts 99
3.10 Brief Outline of Measurement Uncertainty 101
References 105
4 Analysis of Plastics, Fibres and Textiles for Metals Content Using
ICP-OES 107
4.1 A Brief History of Natural and Synthetic Plastic Materials 107
4.2 A Brief History of Chemistry of Plastics 109
4.3 Chemical Structure of Plastics 110
4.4 Polymerization Process of Plastics 111
4.4.1 Polymerisation by Addition Reactions 112
4.4.2 Polymerisation by Condensation Reactions 112
4.5 Additives in Plastics 113
4.6 Methods of Sample Preparation for Metal Content of Plastics, Fibres and
Textiles 115
4.6.1 Sample Preparation Using Dissolution Method 115
4.6.2 Sample Preparation Using Dry Ashing Methods 117
4.6.3 Sample Preparation Using Microwave Acid Digestion Method 119
4.6.4 Sample Preparation Using Oxygen Bomb Combustion Method 121
4.7 Comparative Study of Methods of Analysis of Plastic Samples for Metals
Content 121
4.8 Study of Leaching of Metals from Plastics 123
4.8.1 Study of Leaching of Metals from Children's Toys 124
4.9 Analysis for Toxic Metals in Plastics and Non-Electrical Additives Used
in Electrical and Electronic Components as Required by RoHS 125
4.9.1 Method for Metal Analysis of Plastics and Non-Electrical Additives
Used in Electrical and Electronic Products 127
4.10 Conclusion 131
References 132
5 Metal Analysis of Virgin and Crude Petroleum Products 133
5.1 Introduction 133
5.2 Brief Introduction to Refining Process in the Petroleum Industry 134
5.3 Metals in Crude Oils and Petroleum Products 135
5.4 Requirements for the Determination of Metal Content in Virgin and Crude
Oils 136
5.5 Wear Metals and Metal Contaminants in Lubricating Oils 138
5.6 Brief Outline of the Determination of Metals in Organic Materials Using
Atomic Spectroscopy Methods 139
5.7 Application of Atomic Spectroscopic Techniques in the Analysis of
Virgin and Wear Oils for Metals Content 140
5.7.1 Choice of Solvents Suitable for Metal Analysis of Crude and
Lubricating Oils Using ICP-OES 141
5.7.2 Selection of Representative Samples in the Study of Metal Analysis of
High Viscosity and Low Viscosity Oil Blends 141
5.7.3 Physical Properties of Selected Solvents for Dissolving High
Viscosity and Low Viscosity Oils for Metal Analysis 142
5.7.4 Methods of Sample Preparation for Metal Analysis of High Viscosity
and Low Viscosity Oil Blends 142
5.7.5 Long-Term Study of Metal Analysis Using Kerosene, Teralin and Decalin
Solvents Using ICP-OES 143
5.7.6 Comparative Study of Non-Destructive Methods of Analysis of Metals
'Spiked' in High Viscosity and Low Viscosity Oil Blends Using ICP-OES 144
5.8 Analysis of Type C and D Fractions for Metal Content Using Dry Ashing
Method 149
5.9 Analysis of 'Metal Spiked' Oil Blends Using Microwave Acid Digestion
for Metals Content 150
5.10 Analysis of 'Metal Spiked' Oil Blends Using High Pressure Oxygen
Combustion for Metals Content 152
5.11 Comparative Study of Analysis of Trace Levels of Toxic Metals Using
Microwave Acid Digestion and Oxygen Bomb Combustion 153
5.11.1 Conclusion to Trace Analysis of Toxic Metals in Oil Products 155
5.12 Extraction Method for the Determination of Metals of High Viscosity
and Low Viscosity Oil Blends 155
5.13 Analysis of Old Lubricating Oil for Total Metal Content Using a Slurry
Method with Internal Standard 156
5.14 Conclusion 158
References 160
6 Metal Analysis of Structural Adhesives 161
6.1 Introduction 161
6.2 Setting and Curing of Adhesives 162
6.3 Introduction to Modern Synthetic Adhesives 162
6.3.1 Cyanoacrylate Adhesives 162
6.3.2 Anaerobic and Acrylic Adhesives 163
6.3.3 Epoxy Structural Adhesives 165
6.3.4 Phenolic Adhesives 167
6.3.5 Polyurethane Adhesives 167
6.4 Metal Salts and Concomitant Metals in Adhesives 168
6.5 Metals Associated with Cyanoacrylate Adhesives 169
6.6 Non-Destructive Methods of Analysis for Metals Content in Cyanoacrylate
Adhesives 170
6.6.1 General Method 170
6.6.2 Standard Addition Method 171
6.6.3 Internal Standard Method 171
6.7 Destructive Methods of Analysis for Metals Content in Cyanoacrylate
Adhesives 172
6.7.1 Sample Preparation Using Ashing Method 173
6.7.2 Sample Preparation Using Microwave Acid Digestion 174
6.7.3 Sample Preparation Using Oxygen Bomb Combustion 174
6.8 Conclusion to Analysis of Cyanoacrylate Products 175
6.9 Metals Associated with Anaerobic Adhesives 176
6.10 Destructive Methods of Sample Preparation for Metals Content in
Anaerobic Adhesives 177
6.10.1 Ashing Method of Type A and Type B Anaerobic Adhesives 177
6.10.2 Sample Preparation of Anaerobic Adhesives Using Microwave Acid
Digestion 178
6.10.3 Sample Preparation of Anaerobic Adhesive Using Oxygen Bomb
Combustion 180
6.10.4 Conclusion to Analysis of Anaerobic Adhesives 180
6.11 Metal Analysis of Chemical Raw Materials Used to Manufacture Anaerobic
Adhesives 181
6.11.1 Column Extraction of Metal from Liquid Monomers 181
6.12 Analysis of Metal Salt Content Dissolved in Aerosol Solvent(s) 182
6.12.1 Sample Preparation and Analysis of Metals in Aerosol 183
6.13 A Study of the Effects of Anaerobic Adhesives on Metallic Substrates
183
6.14 Metals Associated with Epoxy Adhesives 186
6.14.1 Composition of Epoxy Adhesives 187
6.14.2 Preparation of Epoxy Adhesive 'Spiked' with Ge(AcAc)BF4 187
6.14.3 Determination of the Concentration of Ge(AcAc)BF4 in Epoxy Adhesives
Using Non-Destructive Methods 188
6.14.4 Determination of the Concentration of Ge(AcAc)BF4 in Epoxy Adhesives
Using Destructive Methods 190
6.14.5 Conclusion of Metal Analysis of Epoxy Adhesives 192
6.15 Metals Associated with Phenolic Adhesives 193
6.15.1 Preparation of Typical Phenolic Adhesives Containing Calcium and
Copper Sulphonate Salts 193
6.15.2 Non-Destructive Methods of Analysis of Phenolic Adhesives 194
6.16 Metals Associated with Polyurethane Adhesives 194
6.16.1 Preparation and Analysis of Polyurethane Adhesives Containing
Organometallic Catalysts 195
6.17 Conclusion to Metal Analysis of Phenolic and Polyurethane Adhesives
197
References 198
7 Hyphenated and Miscellaneous Techniques Used with ICP-OES 199
7.1 Introduction 199
7.2 Coupling of Flow Injection Analysis with ICP-OES 200
7.2.1 Theory of Flow Injection 201
7.2.2 Configuration of ICP-OES/FIA System 202
7.2.3 Signal Acquisition and Data Management 203
7.2.4 Reproducibility of Measurements Using ICP-OES/FIA 204
7.2.5 Dispersion and Diffusion of 'Sample Plug' in a Carrier Stream 205
7.2.6 Metal Analysis of Organic Compounds Using ICP-OES-FIA 206
7.2.7 Effect of Loop Size on Signal Response 207
7.2.8 Comparative Measurements of Peak Height and Peak Area 208
7.2.9 Effect of Viscosity Using ICP-OES/FIA 209
7.2.10 A Study of Solvent Effects Using ICP-OES/FIA 210
7.2.11 Determination of Limit of Detection and Quantification 210
7.2.12 Conclusions of Analysis Using ICP-OES-FIA 211
7.3 Use of Internal Standard(s) with ICP-OES 213
7.3.1 Conclusion to Internal Standard(s) Study 217
7.4 Coupling of Ion Chromatography with ICP-OES 218
7.4.1 Preconcentration of Metals Using Ion Chromatography 220
7.4.2 Analysis of Lanthanide and Transition Metals with ICP-OES/IC 221
7.5 Coupling of Gas Chromatography with ICP-OES or Atomic Emission Detector
222
7.6 Metal Analysis Using ICP-OES Coupled with Electro-Thermal Vaporisation
224
7.7 Surface Analysis Using Laser Ablation with ICP-OES 226
7.8 Determination of Thickener Content of Paints, Pharmaceutical Products
and Adhesives Using ICP-OES 227
7.9 Metal Analysis of Metallo-Pharmaceutical Products 230
7.9.1 Metallic Type Antibiotic Drugs 233
7.9.2 Platinum and Palladium Drugs for Cancer Treatments 234
7.10 Metal Analysis of Infusion and Dialysis and Bio-Monitoring Solutions
235
7.11 Organometallic Compounds 236
7.12 Metals and Metalloid Analysis in Support of Forensic Science 237
7.13 Non-Prescription Nutritional Dietary Supplements 239
7.14 Trace Metal Analysis of Foods 244
7.14.1 General Methods of Metal Analysis of Foods 244
7.14.2 Conclusion to Food Analysis 246
References 246
Index 249