Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III Ceramic Engineering and Science Proceedings Volume 30, Issue 8, 2009 Edited by Tatsuki Ohji Mrityunjay Singh Volume Editors Dileep Singh Jonathan Salem
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III Ceramic Engineering and Science Proceedings Volume 30, Issue 8, 2009 Edited by Tatsuki Ohji Mrityunjay Singh Volume Editors Dileep Singh Jonathan SalemHinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Tatsuki Ohji is a Prime Senior Research Scientist of National Institute of Advanced Industrial Science and Technology (AIST) and a Designated Professor in the Graduate School of Science and Engineering, Meijo University, Japan. He has authored or coauthored more than 330 peer-reviewed papers and 12 book chapters, edited 30 book volumes, chaired or co-chaired more than 30 international conferences and symposia, and hold more than 40 patents. Fellow of the American Association for the Advancement of Science (AAAS), the American Ceramic Society and ASM International, and Academician of the World Academy of Ceramics, he has received numerous awards including ECD Bridge Building Award of the American Ceramic Society, Academic Achievement Award of the Ceramic Society of Japan, IIM Lectureship Award of ASM International, Lee Hsun Lecture Award of IMR Chinese Academy of Sciences, and Distinguished Research Achievement Award of the Japan Society of Powder and Powder Metallurgy.
Inhaltsangabe
Preface ix Introduction xi ADVANCED PROCESSING AND MANUFACTURING Development of High Temperature Joining and Thermomechanical Characterization Approaches for SiC/SiC Composites 3 Michael C. Halbig, Mrityunjay Singh, and Jerry Lang Microstructural Observation of Interfaces in Diffusion Bonded Silicon Carbide Ceramics by TEM 13 Hiroshi Tsuda, Shigeo Mori, Michael C. Halbig, Mrityunjay Singh, and Rajiv Asthana Preparation and Characterization of Rb-SiC Ceramics Fabricated from Phenolic Resin/SiC 21 Akihiro Shimamura, Mikinori Hotta, Tatsuki Ohji, and Naoki Kondo New Combined Method of MPS and FEM for Simulating Friction Stir Processing 27 Hisashi Serizawa and Fumikazu Miyasaka Novel Visualizing Technique of the Tips of the Cracks for Indentation Fracture Resistance Method 37 H. Miyazaki and Y. Yoshizawa Slip-Casting by Water-Absorbing Resin Mold Enables Crack-Free Ceramic Molding System and Products with Partially Different Thicknesses 45 Akio Matsumoto Influence of Lanthanoid Dopant and N/O Substitution on the Electronic Structure and Luminescent Properties of Lanthanum Silicon Oxynitride Phosphors 55 I.A.M. Ibrahim, Z. Len é, L. Benco, and P. ajgalík Effect of Ti3SiC2 Particulates on the Mechanical and Tribological Behavior of Sn Matrix Composites 65 T. Hammann, R. Johnson, M. F. Riyad, and S. Gupta Field Assisted Sintering of Silicate Glass-Containing Alumina 75 Mattia Biesuz and Vincenzo M. Sglavo Modeling the First Activation Stages of the Fe(hfa)2TMEDA CVD Precursor on a Heated Growth Surface 83 Gloria Tabacchi, Ettore Fois, Davide Barreca, Giorgio Carraro, Alberto Gasparotto, and Chiara Maccato Development of High Aspect Ratio Hexagonal Boron Nitride Filler by Mechanical Exfoliation 91 Yuichi Tominaga, Kimiyasu Sato, Daisuke Shimamoto, Yusuke Imai, and Yuji Hotta Preparation and Characterization of Nanostructured Films: Study of Hydrophobicity and Antibacterial Properties for Surface Protection 101 M. Barberio, S. Veltri, E. Sokullu, F. Xu, M.A. Gauthier, and P. Antici ADDITIVE MANUFACTURING AND 3D PRINTING 3-D Printing and Characterization of Polymer Composites with Different Reinforcements 115 Anton Salem, Mrityunjay Singh, and Michael C. Halbig Additive Manufacturing of Drainage Segments for Cooling System of Crucible Melting Furnaces 123 Miranda Fateri, Andreas Gebhardt, and Georg Renftle Additive Manufacturing of Silicon Carbide-Based Ceramics by 3-D Printing Technologies 133 Shirley X. Zhu, Michael C. Halbig, and Mrityunjay Singh Additive Manufacturing of Light Weight Ceramic Matrix Composites for Gas Turbine Engine Applications 145 Mrityunjay Singh, Michael C. Halbig, and Joseph E. Grady Application of Selective Separation Sintering in Ceramics 3D Printing 151 J. Zhang and B. Khoshnevis Contour Crafting of Advanced Ceramic Materials 159 Mahmood Shirooyeh, Mohammadaref Vali, David Shackleford, Payman Torabi, Paul W. Rehrig, Oh-Hun Kwon, and Behrokh Khoshnevis Author Index 169
Preface ix Introduction xi ADVANCED PROCESSING AND MANUFACTURING Development of High Temperature Joining and Thermomechanical Characterization Approaches for SiC/SiC Composites 3 Michael C. Halbig, Mrityunjay Singh, and Jerry Lang Microstructural Observation of Interfaces in Diffusion Bonded Silicon Carbide Ceramics by TEM 13 Hiroshi Tsuda, Shigeo Mori, Michael C. Halbig, Mrityunjay Singh, and Rajiv Asthana Preparation and Characterization of Rb-SiC Ceramics Fabricated from Phenolic Resin/SiC 21 Akihiro Shimamura, Mikinori Hotta, Tatsuki Ohji, and Naoki Kondo New Combined Method of MPS and FEM for Simulating Friction Stir Processing 27 Hisashi Serizawa and Fumikazu Miyasaka Novel Visualizing Technique of the Tips of the Cracks for Indentation Fracture Resistance Method 37 H. Miyazaki and Y. Yoshizawa Slip-Casting by Water-Absorbing Resin Mold Enables Crack-Free Ceramic Molding System and Products with Partially Different Thicknesses 45 Akio Matsumoto Influence of Lanthanoid Dopant and N/O Substitution on the Electronic Structure and Luminescent Properties of Lanthanum Silicon Oxynitride Phosphors 55 I.A.M. Ibrahim, Z. Len é, L. Benco, and P. ajgalík Effect of Ti3SiC2 Particulates on the Mechanical and Tribological Behavior of Sn Matrix Composites 65 T. Hammann, R. Johnson, M. F. Riyad, and S. Gupta Field Assisted Sintering of Silicate Glass-Containing Alumina 75 Mattia Biesuz and Vincenzo M. Sglavo Modeling the First Activation Stages of the Fe(hfa)2TMEDA CVD Precursor on a Heated Growth Surface 83 Gloria Tabacchi, Ettore Fois, Davide Barreca, Giorgio Carraro, Alberto Gasparotto, and Chiara Maccato Development of High Aspect Ratio Hexagonal Boron Nitride Filler by Mechanical Exfoliation 91 Yuichi Tominaga, Kimiyasu Sato, Daisuke Shimamoto, Yusuke Imai, and Yuji Hotta Preparation and Characterization of Nanostructured Films: Study of Hydrophobicity and Antibacterial Properties for Surface Protection 101 M. Barberio, S. Veltri, E. Sokullu, F. Xu, M.A. Gauthier, and P. Antici ADDITIVE MANUFACTURING AND 3D PRINTING 3-D Printing and Characterization of Polymer Composites with Different Reinforcements 115 Anton Salem, Mrityunjay Singh, and Michael C. Halbig Additive Manufacturing of Drainage Segments for Cooling System of Crucible Melting Furnaces 123 Miranda Fateri, Andreas Gebhardt, and Georg Renftle Additive Manufacturing of Silicon Carbide-Based Ceramics by 3-D Printing Technologies 133 Shirley X. Zhu, Michael C. Halbig, and Mrityunjay Singh Additive Manufacturing of Light Weight Ceramic Matrix Composites for Gas Turbine Engine Applications 145 Mrityunjay Singh, Michael C. Halbig, and Joseph E. Grady Application of Selective Separation Sintering in Ceramics 3D Printing 151 J. Zhang and B. Khoshnevis Contour Crafting of Advanced Ceramic Materials 159 Mahmood Shirooyeh, Mohammadaref Vali, David Shackleford, Payman Torabi, Paul W. Rehrig, Oh-Hun Kwon, and Behrokh Khoshnevis Author Index 169
Es gelten unsere Allgemeinen Geschäftsbedingungen: www.buecher.de/agb
Impressum
www.buecher.de ist ein Internetauftritt der buecher.de internetstores GmbH
Geschäftsführung: Monica Sawhney | Roland Kölbl | Günter Hilger
Sitz der Gesellschaft: Batheyer Straße 115 - 117, 58099 Hagen
Postanschrift: Bürgermeister-Wegele-Str. 12, 86167 Augsburg
Amtsgericht Hagen HRB 13257
Steuernummer: 321/5800/1497
USt-IdNr: DE450055826
