This is the fifth book of the Kluwer's series Advances in Robot Kine matics. The book presents the most recent research advances in the theory, design, control and application of robotic systems, which are intended for a variety of purposes such as manipulation, manufactur ing, automation, surgery, locomotion and biomechanics. The issues addressed are fundamentally kinematic in nature, including synthesis, calibration, redundancy, force control, dexterity, inverse and forward kinematics, kinematic singularities, as well as over-constrained systems. Methods used include line geometry,…mehr
This is the fifth book of the Kluwer's series Advances in Robot Kine matics. The book presents the most recent research advances in the theory, design, control and application of robotic systems, which are intended for a variety of purposes such as manipulation, manufactur ing, automation, surgery, locomotion and biomechanics. The issues addressed are fundamentally kinematic in nature, including synthesis, calibration, redundancy, force control, dexterity, inverse and forward kinematics, kinematic singularities, as well as over-constrained systems. Methods used include line geometry, quaternion algebra, screw alge bra, and linear algebra. These methods are applied to both parallel and serial multi-degree-of-freedom systems. The results should interest researchers, teachers and students, in fields of engineering and mathe matics related to robot theory, design, control and application. Each contribution in this book had been rigorously reviewed by two or three independent reviewers and 53 articles had been recommended for publication. We are happy to observe that Advances in Robot Kine matics has always attracted the most outstanding authors and has de veloped a remarkable scientific community in the area. Many important and original scientific results were for the first time reported and dis cussed in these books. All articles in this book were also reported at the eight international symposium on Advances in Robot Kinematics that was organised in June 2002 in Caldes de Malavella in Spain.Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
A kinematic calibration of in-parallel actuated mechanisms using Fourier series (evaluation index for determination of the set of measurement paths).- Dynamic performance indices for 3-DOF parallel manipulators.- Evaluation of a Cartesian parallel manipulator.- Rotation symmetry axes and the quality index in a 3D octahedral parallel robot manipulator system.- Linearized kinematics for state estimation in robotics.- Performance evaluation of the grasp of two cooperating robots using a type map.- On the invariance of manipulability indices.- Influence of a manipulability index on trajectory planning for robots in a workspace with obstacles.- Humanoid humeral pointing kinematics.- Efficient algorithms for robots with human-like structures and interactive haptic simulation.- Particular aspects in designing anthropomorphic mechanisms.- Uncertainty model and singularities of 3-2-1 wire-based tracking systems.- Tension distribution in tendon-based Stewart platforms.- Trajectory tracking control for a cable suspension manipulator.- Is design of new drugs a challenge for kinematics?.- Redundant spatial Stewart-Gough platform with a maximal for-ward kinematics solution set.- Singularities and self-motions of a special type of platforms.- Investigation of singularities and self-motions of the 3-UPU robot.- On closure modes and singular configurations of kinematic chains.- Constraint singularities as c-space singularities.- Hierarchical kinematic analysis of a redundant robot.- Motion planning of redundant manipulators for specified trajectory tasks.- Realtime coordinated redundant motion of a nonholonomic mobile manipulator.- Using body flexibility to simplify the solution of kinematic equations in the dynamic analysis of robot mechanisms and multibody systems.- Subdivision algorithms for motion design based on homologous points.- Group theory can explain the mobility of paradoxical linkages.- Solving multi-loop linkages by iterating 2D clippings.- Revisiting Plücker coordinates in vision-based control.- On displacing a screw about a screw.- Algebraic solution of inverse kinamatics revisited.- A variant of a 6-RKS hunt-type parallel manipulator to easily use insensitivity position configurations.- On the kinematics of parallel mechanisms with bi-stable polymer actuators.- The kinetostatic design of a Schönflies-motion generator.- Design of 2-DOF parallel mechanisms for machining applications.- Kinematically equivalent spatial mechanisms with revolute pair at input and prismatic pair at output.- The optimal synthesis of parallel manipulators for desired workspaces.- Connecting assembly modes for workspace enlargement.- The isotropic conditions of parallel manipulators of Delta topology.- An accurate algorithm for the real-time solution of the direct kinematics of 6-3 Stewart platform manipulators.- 3-Legged spatial 4-bar platform kinematics.- Dynamic modeling of the Orthoglide.- Workspace analysis of the Orthoglide using interval analysis.- A divide-and-conquer method for inverse kinematics of hyper-redundant manipulators.- Interval propagation for solving parallel spherical mechanisms.- Kinematic analysis of spatial 3-dof parallelepiped mechanisms.- Kinematics of a planar robot with rolling contact joints.- Dual quaternion synthesis of contrained robots.- Type synthesis of linear translational parallel manipulators.- Stiffness synthesis of a variable geometry planar robot.- Synthesis of architecturally mobile double-planar platforms.- Approximate motion synthesis using an SVD based distance metric.- Navigation and gait planning for planarwalker.- Near Optimal Coordination of legged vehicles over large obstacles.- Author Index.
A kinematic calibration of in-parallel actuated mechanisms using Fourier series (evaluation index for determination of the set of measurement paths).- Dynamic performance indices for 3-DOF parallel manipulators.- Evaluation of a Cartesian parallel manipulator.- Rotation symmetry axes and the quality index in a 3D octahedral parallel robot manipulator system.- Linearized kinematics for state estimation in robotics.- Performance evaluation of the grasp of two cooperating robots using a type map.- On the invariance of manipulability indices.- Influence of a manipulability index on trajectory planning for robots in a workspace with obstacles.- Humanoid humeral pointing kinematics.- Efficient algorithms for robots with human-like structures and interactive haptic simulation.- Particular aspects in designing anthropomorphic mechanisms.- Uncertainty model and singularities of 3-2-1 wire-based tracking systems.- Tension distribution in tendon-based Stewart platforms.- Trajectory tracking control for a cable suspension manipulator.- Is design of new drugs a challenge for kinematics?.- Redundant spatial Stewart-Gough platform with a maximal for-ward kinematics solution set.- Singularities and self-motions of a special type of platforms.- Investigation of singularities and self-motions of the 3-UPU robot.- On closure modes and singular configurations of kinematic chains.- Constraint singularities as c-space singularities.- Hierarchical kinematic analysis of a redundant robot.- Motion planning of redundant manipulators for specified trajectory tasks.- Realtime coordinated redundant motion of a nonholonomic mobile manipulator.- Using body flexibility to simplify the solution of kinematic equations in the dynamic analysis of robot mechanisms and multibody systems.- Subdivision algorithms for motion design based on homologous points.- Group theory can explain the mobility of paradoxical linkages.- Solving multi-loop linkages by iterating 2D clippings.- Revisiting Plücker coordinates in vision-based control.- On displacing a screw about a screw.- Algebraic solution of inverse kinamatics revisited.- A variant of a 6-RKS hunt-type parallel manipulator to easily use insensitivity position configurations.- On the kinematics of parallel mechanisms with bi-stable polymer actuators.- The kinetostatic design of a Schönflies-motion generator.- Design of 2-DOF parallel mechanisms for machining applications.- Kinematically equivalent spatial mechanisms with revolute pair at input and prismatic pair at output.- The optimal synthesis of parallel manipulators for desired workspaces.- Connecting assembly modes for workspace enlargement.- The isotropic conditions of parallel manipulators of Delta topology.- An accurate algorithm for the real-time solution of the direct kinematics of 6-3 Stewart platform manipulators.- 3-Legged spatial 4-bar platform kinematics.- Dynamic modeling of the Orthoglide.- Workspace analysis of the Orthoglide using interval analysis.- A divide-and-conquer method for inverse kinematics of hyper-redundant manipulators.- Interval propagation for solving parallel spherical mechanisms.- Kinematic analysis of spatial 3-dof parallelepiped mechanisms.- Kinematics of a planar robot with rolling contact joints.- Dual quaternion synthesis of contrained robots.- Type synthesis of linear translational parallel manipulators.- Stiffness synthesis of a variable geometry planar robot.- Synthesis of architecturally mobile double-planar platforms.- Approximate motion synthesis using an SVD based distance metric.- Navigation and gait planning for planarwalker.- Near Optimal Coordination of legged vehicles over large obstacles.- Author Index.
Es gelten unsere Allgemeinen Geschäftsbedingungen: www.buecher.de/agb
Impressum
www.buecher.de ist ein Internetauftritt der buecher.de internetstores GmbH
Geschäftsführung: Monica Sawhney | Roland Kölbl | Günter Hilger
Sitz der Gesellschaft: Batheyer Straße 115 - 117, 58099 Hagen
Postanschrift: Bürgermeister-Wegele-Str. 12, 86167 Augsburg
Amtsgericht Hagen HRB 13257
Steuernummer: 321/5800/1497
