American Institute of Chemical Engineers (Aiche)
Aiche Equipment Testing Procedure - Mixing Equipment (Impeller Type)
American Institute of Chemical Engineers (Aiche)
Aiche Equipment Testing Procedure - Mixing Equipment (Impeller Type)
- Broschiertes Buch
- Merkliste
- Auf die Merkliste
- Bewerten Bewerten
- Teilen
- Produkt teilen
- Produkterinnerung
- Produkterinnerung
The latest edition of this industry-friendly guide to evaluating the performance of mixing equipment brings this traditional process operation into the 21st century. The book starts with basic definitions and terms, and goes to detail test planning and procedures, and computation and evaluation of results. Appendices offer a troubleshooting checklists, sample log.
Andere Kunden interessierten sich auch für
- American Institute of Chemical Engineers (Aiche)Aiche Equipment Testing Procedure - Centrifugal Compressors56,99 €
- Center for Chemical Process Safety (CCPS)Guidelines for Process Equipment Reliability Data, with Data Tables228,99 €
- GuptaMixing and Crystallization189,99 €
- H.E.A. van den Akker / J.J. Derksen (eds.)10th European Conference on Mixing431,99 €
- Center for Chemical Process Safety (CCPS)Guidelines for Postrelease Mitigation Technology in the Chemical Process Industry160,99 €
- William F EarlyContractor Client Relations Assure Safty64,99 €
- Laurence G BrittonAvoiding Static Ignition Hazards in Chemical Operations191,99 €
-
-
-
The latest edition of this industry-friendly guide to evaluating the performance of mixing equipment brings this traditional process operation into the 21st century. The book starts with basic definitions and terms, and goes to detail test planning and procedures, and computation and evaluation of results. Appendices offer a troubleshooting checklists, sample log.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Produktdetails
- Produktdetails
- Verlag: Wiley
- 3rd edition
- Seitenzahl: 144
- Erscheinungstermin: 15. Mai 2001
- Englisch
- Abmessung: 280mm x 216mm x 8mm
- Gewicht: 392g
- ISBN-13: 9780816908363
- ISBN-10: 0816908362
- Artikelnr.: 23596284
- Herstellerkennzeichnung
- Libri GmbH
- Europaallee 1
- 36244 Bad Hersfeld
- 06621 890
- Verlag: Wiley
- 3rd edition
- Seitenzahl: 144
- Erscheinungstermin: 15. Mai 2001
- Englisch
- Abmessung: 280mm x 216mm x 8mm
- Gewicht: 392g
- ISBN-13: 9780816908363
- ISBN-10: 0816908362
- Artikelnr.: 23596284
- Herstellerkennzeichnung
- Libri GmbH
- Europaallee 1
- 36244 Bad Hersfeld
- 06621 890
The AMERICAN INSTITUTE OF CHEMICAL ENGINEERS (AIChE) is a distinguished professional association that strives to provide leadership in the advancing chemical engineering profession. The Equipment Testing Procedures Committee is composed of engineers with substantial experience in the design and operation of process plants, as well as in solving problems that can arise with the equipment used in these plants.
Figures.
100.0 Purpose and Scope.
101.0 Purpose.
102.0 Scope.
103.0 Liability.
200.0 Definition and Description of Terms.
201.0 Introduction.
202.0 Mixing Equipment.
202.1 Equipment Configuration.
202.2 Impellers.
202.3 Vessels.
202.4 Auxiliary Equipment.
203.0 Basic Nomenclature.
203.1 Equipment Variables.
203.2 Mixing Related Dimensionless Groups.
203.3 Process Related Dimensionless Groups.
204.0 Operating Conditions.
205.0 Types of Tests.
205.1 Operating Performance.
205.2 Mechanical Conditions.
205.3 Mechanical Operation.
205.4 Mixer Support Structure.
205.5 Process Conditions.
206.0 Performance Criteria.
300.0 Test Planning.
301.0 Preliminary Considerations.
301.1 Safety.
301.2 Environmental.
301.3 Test Objectives.
301.4 Multiple Applications.
302.0 Plans for Operating Tests.
302.1 Speed.
302.2 Power.
302.3 Torque.
303.0 Plans for Mechanical Condition Tests.
303.1 Equipment Verification.
303.2 Alignment.
303.3 Runout.
303.4 Gear Tooth Contact.
303.5 Seals.
303.6 Auxiliary Equipment.
303.7 Vibration.
303.8 Noise.
304.0 Plans for Mechanical Operation Tests.
305.0 Plans for Process Condition Tests.
305.1 Miscible Liquid Blending.
305.2 Heat Transfer.
305.3 Immiscible Liquid Dispersion.
305.4 Solids Suspension in Liquid.
305.5 Gas-Liquid Dispersion.
305.6 Variable Conditions.
305.7 Other Measurable Results.
306.0 Performance Criteria.
400.0 Measurement Methods & Instruments.
401.0 Introduction.
402.0 Operating Performance Measurements.
402.1 Speed.
402.2 Power.
402.3 Torque.
403.0 Mechanical Condition Measurements.
403.1 Alignment and Adjustment.
403.2 Runout.
403.3 Gear Tooth Contact Pattern.
403.4 Seals.
403.5 Auxiliary Equipment.
403.6 Vibration.
403.7 Noise.
403.8 Temperature.
404.0 Mechanical Operation Measurements.
404.1 Natural Frequency.
404.2 Shaft Strain.
404.3 Deflection.
404.4 Spectral Analysis.
405.0 Process Condition Measurements.
405.1 Density or Specific Gravity.
405.2 Viscosity.
405.3 Physical State.
405.4 Chemical Composition.
405.5 Other Physical/Chemical Properties.
406.0 System Operating Conditions.
406.1 Temperature.
406.2 Pressure.
406.3 Liquid Level, Volume, and Flow.
406.4 Phase Ratios.
406.5 Blend Time.
406.6 Sampling.
500.0 Test Procedures.
501.0 General Test Procedures.
502.0 Preliminary Operation and Safety.
502.1 Instruction Manuals.
502.2 Check for Debris in Vessel.
502.3 Check for Obstructions.
502.4 Pre-Operational Check.
502.5 Hand Turning.
502.6 Jog.
502.7 Hydrostatic Pressure Tests.
502.8 System Test in Air.
502.9 System Water Test.
503.0 Operating Performance Tests.
503.1 Speed.
503.2 Power.
503.3 Torque.
504.0 Mechanical Condition Tests.
504.1 Alignment and Adjustments.
504.2 Runout.
504.3 Gear Tooth Contact Patterns.
504.4 Seals.
504.5 Auxiliary Equipment.
504.6 Vibration.
504.7 Noise.
504.8 Temperature.
505.0 Mechanical Operation Tests.
505.1 Natural Frequency.
505.2 Deflections of Structure.
506.0 Process Condition Tests.
506.1 Blending.
506.2 Heat Transfer.
506.3 Immiscible Liquids Dispersion.
506.4 Liquid-Solid Contacting.
506.5 Liquid-Gas Contacting.
506.6 Liquid-Gas-Solid Tests.
506.7 Other Tests.
600.0 Computation of Results.
601.0 Data Requirements.
601.1 Dimensional Measurements.
601.2 Operating Conditions.
601.3 Process Properties.
602.0 Fundamental Calculations.
602.1 Reynolds Number.
602.2 Power Number.
602.3 Torque.
603.0 Operating Performance Calculations.
603.1 Power.
603.2 Torque.
604.0 Mechanical Condition Calculations.
605.0 Mechanical Operation Calculations.
605.1 Natural Frequency.
605.2 Deflection.
606.0 Process Condition Calculations.
606.1 Blending.
606.2 Heat Transfer.
606.3 Immiscible Liquid Dispersion.
606.4 Liquid-Solid Contacting.
606.5 Liquid-Gas Contacting.
606.6 Other Tests.
700.0 Interpretation of Results.
701.0 Introduction.
702.0 Interpretation of Operating Performance.
702.1 Speed.
702.2 Power.
702.3 Torque.
703.0 Interpretation of Mechanical Conditions.
703.1 Alignment and Adjustments.
703.2 Runout.
703.3 Gear Tooth Contact Patterns.
703.4 Seals.
703.5 Auxiliary Equipment.
703.6 Vibration.
703.7 Noise.
703.8 Temperature.
703.9 Water Power and Corrections.
704.0 Interpretation of Mechanical Operation.
704.1 Natural Frequency Vibrations.
704.2 Deflection.
705.0 Interpretation of Process Conditions.
705.1 Blending.
705.2 Heat Transfer.
705.3 Immiscible-Liquid Contacting.
705.4 Liquid-Solid Contacting.
705.5 Liquid-Gas Contacting.
706.0 Other Tests.
707.0 Sources of Error.
708.0 Computer Modeling.
800.0 Appendix.
801.0 Trouble Shooting Checklist.
802.0 Glossary.
803.0 Notation.
803.1 Greek Letters.
803.2 Dimensionless Groups.
804.0 Equations and Related Groups.
804.1 Impeller Flow.
804.2 Power and Pumping Numbers.
805.0 Calculation Examples.
805.1 Power.
805.2 Mechanical.
805.3 Liquid-Solid.
806.0 Sample Log Sheet.
806.1 System Test Log.
806.2 Physical Description Sketch.
806.3 General Process Log.
807.0 Scale-Up/Scale-Down.
807.1 Geometric Similarity.
807.2 Scale Parameter.
807.3 Correlating Process Parameters.
807.4 Correlating Process Parameters.
807.5 Mixing Correlation.
808.0 References.
Index.
100.0 Purpose and Scope.
101.0 Purpose.
102.0 Scope.
103.0 Liability.
200.0 Definition and Description of Terms.
201.0 Introduction.
202.0 Mixing Equipment.
202.1 Equipment Configuration.
202.2 Impellers.
202.3 Vessels.
202.4 Auxiliary Equipment.
203.0 Basic Nomenclature.
203.1 Equipment Variables.
203.2 Mixing Related Dimensionless Groups.
203.3 Process Related Dimensionless Groups.
204.0 Operating Conditions.
205.0 Types of Tests.
205.1 Operating Performance.
205.2 Mechanical Conditions.
205.3 Mechanical Operation.
205.4 Mixer Support Structure.
205.5 Process Conditions.
206.0 Performance Criteria.
300.0 Test Planning.
301.0 Preliminary Considerations.
301.1 Safety.
301.2 Environmental.
301.3 Test Objectives.
301.4 Multiple Applications.
302.0 Plans for Operating Tests.
302.1 Speed.
302.2 Power.
302.3 Torque.
303.0 Plans for Mechanical Condition Tests.
303.1 Equipment Verification.
303.2 Alignment.
303.3 Runout.
303.4 Gear Tooth Contact.
303.5 Seals.
303.6 Auxiliary Equipment.
303.7 Vibration.
303.8 Noise.
304.0 Plans for Mechanical Operation Tests.
305.0 Plans for Process Condition Tests.
305.1 Miscible Liquid Blending.
305.2 Heat Transfer.
305.3 Immiscible Liquid Dispersion.
305.4 Solids Suspension in Liquid.
305.5 Gas-Liquid Dispersion.
305.6 Variable Conditions.
305.7 Other Measurable Results.
306.0 Performance Criteria.
400.0 Measurement Methods & Instruments.
401.0 Introduction.
402.0 Operating Performance Measurements.
402.1 Speed.
402.2 Power.
402.3 Torque.
403.0 Mechanical Condition Measurements.
403.1 Alignment and Adjustment.
403.2 Runout.
403.3 Gear Tooth Contact Pattern.
403.4 Seals.
403.5 Auxiliary Equipment.
403.6 Vibration.
403.7 Noise.
403.8 Temperature.
404.0 Mechanical Operation Measurements.
404.1 Natural Frequency.
404.2 Shaft Strain.
404.3 Deflection.
404.4 Spectral Analysis.
405.0 Process Condition Measurements.
405.1 Density or Specific Gravity.
405.2 Viscosity.
405.3 Physical State.
405.4 Chemical Composition.
405.5 Other Physical/Chemical Properties.
406.0 System Operating Conditions.
406.1 Temperature.
406.2 Pressure.
406.3 Liquid Level, Volume, and Flow.
406.4 Phase Ratios.
406.5 Blend Time.
406.6 Sampling.
500.0 Test Procedures.
501.0 General Test Procedures.
502.0 Preliminary Operation and Safety.
502.1 Instruction Manuals.
502.2 Check for Debris in Vessel.
502.3 Check for Obstructions.
502.4 Pre-Operational Check.
502.5 Hand Turning.
502.6 Jog.
502.7 Hydrostatic Pressure Tests.
502.8 System Test in Air.
502.9 System Water Test.
503.0 Operating Performance Tests.
503.1 Speed.
503.2 Power.
503.3 Torque.
504.0 Mechanical Condition Tests.
504.1 Alignment and Adjustments.
504.2 Runout.
504.3 Gear Tooth Contact Patterns.
504.4 Seals.
504.5 Auxiliary Equipment.
504.6 Vibration.
504.7 Noise.
504.8 Temperature.
505.0 Mechanical Operation Tests.
505.1 Natural Frequency.
505.2 Deflections of Structure.
506.0 Process Condition Tests.
506.1 Blending.
506.2 Heat Transfer.
506.3 Immiscible Liquids Dispersion.
506.4 Liquid-Solid Contacting.
506.5 Liquid-Gas Contacting.
506.6 Liquid-Gas-Solid Tests.
506.7 Other Tests.
600.0 Computation of Results.
601.0 Data Requirements.
601.1 Dimensional Measurements.
601.2 Operating Conditions.
601.3 Process Properties.
602.0 Fundamental Calculations.
602.1 Reynolds Number.
602.2 Power Number.
602.3 Torque.
603.0 Operating Performance Calculations.
603.1 Power.
603.2 Torque.
604.0 Mechanical Condition Calculations.
605.0 Mechanical Operation Calculations.
605.1 Natural Frequency.
605.2 Deflection.
606.0 Process Condition Calculations.
606.1 Blending.
606.2 Heat Transfer.
606.3 Immiscible Liquid Dispersion.
606.4 Liquid-Solid Contacting.
606.5 Liquid-Gas Contacting.
606.6 Other Tests.
700.0 Interpretation of Results.
701.0 Introduction.
702.0 Interpretation of Operating Performance.
702.1 Speed.
702.2 Power.
702.3 Torque.
703.0 Interpretation of Mechanical Conditions.
703.1 Alignment and Adjustments.
703.2 Runout.
703.3 Gear Tooth Contact Patterns.
703.4 Seals.
703.5 Auxiliary Equipment.
703.6 Vibration.
703.7 Noise.
703.8 Temperature.
703.9 Water Power and Corrections.
704.0 Interpretation of Mechanical Operation.
704.1 Natural Frequency Vibrations.
704.2 Deflection.
705.0 Interpretation of Process Conditions.
705.1 Blending.
705.2 Heat Transfer.
705.3 Immiscible-Liquid Contacting.
705.4 Liquid-Solid Contacting.
705.5 Liquid-Gas Contacting.
706.0 Other Tests.
707.0 Sources of Error.
708.0 Computer Modeling.
800.0 Appendix.
801.0 Trouble Shooting Checklist.
802.0 Glossary.
803.0 Notation.
803.1 Greek Letters.
803.2 Dimensionless Groups.
804.0 Equations and Related Groups.
804.1 Impeller Flow.
804.2 Power and Pumping Numbers.
805.0 Calculation Examples.
805.1 Power.
805.2 Mechanical.
805.3 Liquid-Solid.
806.0 Sample Log Sheet.
806.1 System Test Log.
806.2 Physical Description Sketch.
806.3 General Process Log.
807.0 Scale-Up/Scale-Down.
807.1 Geometric Similarity.
807.2 Scale Parameter.
807.3 Correlating Process Parameters.
807.4 Correlating Process Parameters.
807.5 Mixing Correlation.
808.0 References.
Index.
Figures.
100.0 Purpose and Scope.
101.0 Purpose.
102.0 Scope.
103.0 Liability.
200.0 Definition and Description of Terms.
201.0 Introduction.
202.0 Mixing Equipment.
202.1 Equipment Configuration.
202.2 Impellers.
202.3 Vessels.
202.4 Auxiliary Equipment.
203.0 Basic Nomenclature.
203.1 Equipment Variables.
203.2 Mixing Related Dimensionless Groups.
203.3 Process Related Dimensionless Groups.
204.0 Operating Conditions.
205.0 Types of Tests.
205.1 Operating Performance.
205.2 Mechanical Conditions.
205.3 Mechanical Operation.
205.4 Mixer Support Structure.
205.5 Process Conditions.
206.0 Performance Criteria.
300.0 Test Planning.
301.0 Preliminary Considerations.
301.1 Safety.
301.2 Environmental.
301.3 Test Objectives.
301.4 Multiple Applications.
302.0 Plans for Operating Tests.
302.1 Speed.
302.2 Power.
302.3 Torque.
303.0 Plans for Mechanical Condition Tests.
303.1 Equipment Verification.
303.2 Alignment.
303.3 Runout.
303.4 Gear Tooth Contact.
303.5 Seals.
303.6 Auxiliary Equipment.
303.7 Vibration.
303.8 Noise.
304.0 Plans for Mechanical Operation Tests.
305.0 Plans for Process Condition Tests.
305.1 Miscible Liquid Blending.
305.2 Heat Transfer.
305.3 Immiscible Liquid Dispersion.
305.4 Solids Suspension in Liquid.
305.5 Gas-Liquid Dispersion.
305.6 Variable Conditions.
305.7 Other Measurable Results.
306.0 Performance Criteria.
400.0 Measurement Methods & Instruments.
401.0 Introduction.
402.0 Operating Performance Measurements.
402.1 Speed.
402.2 Power.
402.3 Torque.
403.0 Mechanical Condition Measurements.
403.1 Alignment and Adjustment.
403.2 Runout.
403.3 Gear Tooth Contact Pattern.
403.4 Seals.
403.5 Auxiliary Equipment.
403.6 Vibration.
403.7 Noise.
403.8 Temperature.
404.0 Mechanical Operation Measurements.
404.1 Natural Frequency.
404.2 Shaft Strain.
404.3 Deflection.
404.4 Spectral Analysis.
405.0 Process Condition Measurements.
405.1 Density or Specific Gravity.
405.2 Viscosity.
405.3 Physical State.
405.4 Chemical Composition.
405.5 Other Physical/Chemical Properties.
406.0 System Operating Conditions.
406.1 Temperature.
406.2 Pressure.
406.3 Liquid Level, Volume, and Flow.
406.4 Phase Ratios.
406.5 Blend Time.
406.6 Sampling.
500.0 Test Procedures.
501.0 General Test Procedures.
502.0 Preliminary Operation and Safety.
502.1 Instruction Manuals.
502.2 Check for Debris in Vessel.
502.3 Check for Obstructions.
502.4 Pre-Operational Check.
502.5 Hand Turning.
502.6 Jog.
502.7 Hydrostatic Pressure Tests.
502.8 System Test in Air.
502.9 System Water Test.
503.0 Operating Performance Tests.
503.1 Speed.
503.2 Power.
503.3 Torque.
504.0 Mechanical Condition Tests.
504.1 Alignment and Adjustments.
504.2 Runout.
504.3 Gear Tooth Contact Patterns.
504.4 Seals.
504.5 Auxiliary Equipment.
504.6 Vibration.
504.7 Noise.
504.8 Temperature.
505.0 Mechanical Operation Tests.
505.1 Natural Frequency.
505.2 Deflections of Structure.
506.0 Process Condition Tests.
506.1 Blending.
506.2 Heat Transfer.
506.3 Immiscible Liquids Dispersion.
506.4 Liquid-Solid Contacting.
506.5 Liquid-Gas Contacting.
506.6 Liquid-Gas-Solid Tests.
506.7 Other Tests.
600.0 Computation of Results.
601.0 Data Requirements.
601.1 Dimensional Measurements.
601.2 Operating Conditions.
601.3 Process Properties.
602.0 Fundamental Calculations.
602.1 Reynolds Number.
602.2 Power Number.
602.3 Torque.
603.0 Operating Performance Calculations.
603.1 Power.
603.2 Torque.
604.0 Mechanical Condition Calculations.
605.0 Mechanical Operation Calculations.
605.1 Natural Frequency.
605.2 Deflection.
606.0 Process Condition Calculations.
606.1 Blending.
606.2 Heat Transfer.
606.3 Immiscible Liquid Dispersion.
606.4 Liquid-Solid Contacting.
606.5 Liquid-Gas Contacting.
606.6 Other Tests.
700.0 Interpretation of Results.
701.0 Introduction.
702.0 Interpretation of Operating Performance.
702.1 Speed.
702.2 Power.
702.3 Torque.
703.0 Interpretation of Mechanical Conditions.
703.1 Alignment and Adjustments.
703.2 Runout.
703.3 Gear Tooth Contact Patterns.
703.4 Seals.
703.5 Auxiliary Equipment.
703.6 Vibration.
703.7 Noise.
703.8 Temperature.
703.9 Water Power and Corrections.
704.0 Interpretation of Mechanical Operation.
704.1 Natural Frequency Vibrations.
704.2 Deflection.
705.0 Interpretation of Process Conditions.
705.1 Blending.
705.2 Heat Transfer.
705.3 Immiscible-Liquid Contacting.
705.4 Liquid-Solid Contacting.
705.5 Liquid-Gas Contacting.
706.0 Other Tests.
707.0 Sources of Error.
708.0 Computer Modeling.
800.0 Appendix.
801.0 Trouble Shooting Checklist.
802.0 Glossary.
803.0 Notation.
803.1 Greek Letters.
803.2 Dimensionless Groups.
804.0 Equations and Related Groups.
804.1 Impeller Flow.
804.2 Power and Pumping Numbers.
805.0 Calculation Examples.
805.1 Power.
805.2 Mechanical.
805.3 Liquid-Solid.
806.0 Sample Log Sheet.
806.1 System Test Log.
806.2 Physical Description Sketch.
806.3 General Process Log.
807.0 Scale-Up/Scale-Down.
807.1 Geometric Similarity.
807.2 Scale Parameter.
807.3 Correlating Process Parameters.
807.4 Correlating Process Parameters.
807.5 Mixing Correlation.
808.0 References.
Index.
100.0 Purpose and Scope.
101.0 Purpose.
102.0 Scope.
103.0 Liability.
200.0 Definition and Description of Terms.
201.0 Introduction.
202.0 Mixing Equipment.
202.1 Equipment Configuration.
202.2 Impellers.
202.3 Vessels.
202.4 Auxiliary Equipment.
203.0 Basic Nomenclature.
203.1 Equipment Variables.
203.2 Mixing Related Dimensionless Groups.
203.3 Process Related Dimensionless Groups.
204.0 Operating Conditions.
205.0 Types of Tests.
205.1 Operating Performance.
205.2 Mechanical Conditions.
205.3 Mechanical Operation.
205.4 Mixer Support Structure.
205.5 Process Conditions.
206.0 Performance Criteria.
300.0 Test Planning.
301.0 Preliminary Considerations.
301.1 Safety.
301.2 Environmental.
301.3 Test Objectives.
301.4 Multiple Applications.
302.0 Plans for Operating Tests.
302.1 Speed.
302.2 Power.
302.3 Torque.
303.0 Plans for Mechanical Condition Tests.
303.1 Equipment Verification.
303.2 Alignment.
303.3 Runout.
303.4 Gear Tooth Contact.
303.5 Seals.
303.6 Auxiliary Equipment.
303.7 Vibration.
303.8 Noise.
304.0 Plans for Mechanical Operation Tests.
305.0 Plans for Process Condition Tests.
305.1 Miscible Liquid Blending.
305.2 Heat Transfer.
305.3 Immiscible Liquid Dispersion.
305.4 Solids Suspension in Liquid.
305.5 Gas-Liquid Dispersion.
305.6 Variable Conditions.
305.7 Other Measurable Results.
306.0 Performance Criteria.
400.0 Measurement Methods & Instruments.
401.0 Introduction.
402.0 Operating Performance Measurements.
402.1 Speed.
402.2 Power.
402.3 Torque.
403.0 Mechanical Condition Measurements.
403.1 Alignment and Adjustment.
403.2 Runout.
403.3 Gear Tooth Contact Pattern.
403.4 Seals.
403.5 Auxiliary Equipment.
403.6 Vibration.
403.7 Noise.
403.8 Temperature.
404.0 Mechanical Operation Measurements.
404.1 Natural Frequency.
404.2 Shaft Strain.
404.3 Deflection.
404.4 Spectral Analysis.
405.0 Process Condition Measurements.
405.1 Density or Specific Gravity.
405.2 Viscosity.
405.3 Physical State.
405.4 Chemical Composition.
405.5 Other Physical/Chemical Properties.
406.0 System Operating Conditions.
406.1 Temperature.
406.2 Pressure.
406.3 Liquid Level, Volume, and Flow.
406.4 Phase Ratios.
406.5 Blend Time.
406.6 Sampling.
500.0 Test Procedures.
501.0 General Test Procedures.
502.0 Preliminary Operation and Safety.
502.1 Instruction Manuals.
502.2 Check for Debris in Vessel.
502.3 Check for Obstructions.
502.4 Pre-Operational Check.
502.5 Hand Turning.
502.6 Jog.
502.7 Hydrostatic Pressure Tests.
502.8 System Test in Air.
502.9 System Water Test.
503.0 Operating Performance Tests.
503.1 Speed.
503.2 Power.
503.3 Torque.
504.0 Mechanical Condition Tests.
504.1 Alignment and Adjustments.
504.2 Runout.
504.3 Gear Tooth Contact Patterns.
504.4 Seals.
504.5 Auxiliary Equipment.
504.6 Vibration.
504.7 Noise.
504.8 Temperature.
505.0 Mechanical Operation Tests.
505.1 Natural Frequency.
505.2 Deflections of Structure.
506.0 Process Condition Tests.
506.1 Blending.
506.2 Heat Transfer.
506.3 Immiscible Liquids Dispersion.
506.4 Liquid-Solid Contacting.
506.5 Liquid-Gas Contacting.
506.6 Liquid-Gas-Solid Tests.
506.7 Other Tests.
600.0 Computation of Results.
601.0 Data Requirements.
601.1 Dimensional Measurements.
601.2 Operating Conditions.
601.3 Process Properties.
602.0 Fundamental Calculations.
602.1 Reynolds Number.
602.2 Power Number.
602.3 Torque.
603.0 Operating Performance Calculations.
603.1 Power.
603.2 Torque.
604.0 Mechanical Condition Calculations.
605.0 Mechanical Operation Calculations.
605.1 Natural Frequency.
605.2 Deflection.
606.0 Process Condition Calculations.
606.1 Blending.
606.2 Heat Transfer.
606.3 Immiscible Liquid Dispersion.
606.4 Liquid-Solid Contacting.
606.5 Liquid-Gas Contacting.
606.6 Other Tests.
700.0 Interpretation of Results.
701.0 Introduction.
702.0 Interpretation of Operating Performance.
702.1 Speed.
702.2 Power.
702.3 Torque.
703.0 Interpretation of Mechanical Conditions.
703.1 Alignment and Adjustments.
703.2 Runout.
703.3 Gear Tooth Contact Patterns.
703.4 Seals.
703.5 Auxiliary Equipment.
703.6 Vibration.
703.7 Noise.
703.8 Temperature.
703.9 Water Power and Corrections.
704.0 Interpretation of Mechanical Operation.
704.1 Natural Frequency Vibrations.
704.2 Deflection.
705.0 Interpretation of Process Conditions.
705.1 Blending.
705.2 Heat Transfer.
705.3 Immiscible-Liquid Contacting.
705.4 Liquid-Solid Contacting.
705.5 Liquid-Gas Contacting.
706.0 Other Tests.
707.0 Sources of Error.
708.0 Computer Modeling.
800.0 Appendix.
801.0 Trouble Shooting Checklist.
802.0 Glossary.
803.0 Notation.
803.1 Greek Letters.
803.2 Dimensionless Groups.
804.0 Equations and Related Groups.
804.1 Impeller Flow.
804.2 Power and Pumping Numbers.
805.0 Calculation Examples.
805.1 Power.
805.2 Mechanical.
805.3 Liquid-Solid.
806.0 Sample Log Sheet.
806.1 System Test Log.
806.2 Physical Description Sketch.
806.3 General Process Log.
807.0 Scale-Up/Scale-Down.
807.1 Geometric Similarity.
807.2 Scale Parameter.
807.3 Correlating Process Parameters.
807.4 Correlating Process Parameters.
807.5 Mixing Correlation.
808.0 References.
Index.