Ceramic Transactions Volume 219

Ed.: Ewsuk, Kevin G.; Naito, Makio; Kakeshita, Tomoyuki et al.

• Gebundenes Buch

Produktbeschreibung

This proceedings volume features 59 peer-reviewed papers from ICCCI2009 on interface characterization and control technology, powder and composite processing, joining, the control of airborne particulates, new metallic glasses, and interface phenomena at high temperature. ICCCI2009 was supported by the Global COE Program "Center of Excellence for Advanced Structural and Functional Materials Design" lead by Professor Tomoyuki Kakeshita at Osaka University, the Project on Joining Technology for New Metallic Glasses and Inorganic Materials, the Institute of Materials Research (IMR) of Tohoku University, the Materials and Structures Laboratory (MSL) of the Tokyo Institute of Technology, Kobe Gakuin University, Hosokawa Powder Technology Foundation, the Japan JSPS 124th Committee, and the Joining and Welding Research Institute (JWRI) of Osaka University. Over 160 scientists and engineers from academia and industry from 18 different countries attended ICCCI2009 to see and discuss 140 invited and contributed presentations and posters on the state-of-the-art of interface characterization and control for particulate materials, joining, and nanotechnology.

---

Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.

Produktdetails

• Ceramic Transaction Series Vol.219
• Verlag: Wiley & Sons
• 1. Auflage
• Seitenzahl: 418
• Erscheinungstermin: 2. August 2010
• Englisch
• Abmessung: 240mm x 161mm x 27mm
• Gewicht: 712g
• ISBN-13: 9780470909171
• ISBN-10: 047090917X
• Artikelnr.: 30207151

Inhaltsangabe

Preface. JOINING TECHNOLOGY FOR NEW METALLIC GLASSES AND INORGANIC MATERIALS. Devitrification Behavior and Crystal-Glassy Mixed-Phase Structures Observed in Partially Crystallized Cu-Based Glassy Alloys (D. V. Louzguine-Luzgin
G. Xie
Q. Zhang
and A. Inoue). Direct Bonding of Copper to Alumina and Its Characterization (Wei-Hsing Tuan and Shao-Kuan Lee). Synthesis and Characterization of Materials Harmonized with the Environment-Proton Conductive Silica-Based Hybrid Membranes for Fuel Cells at Intermediate Temperatures (Masaki Kato
Junji Umeda
Masashi Suzuki
Makoto Moriya
Wataru Sakamoto
and Toshinobu Yogo). Formation of Bone-Like Hydroxyapatite on Surface-Modified Bulk Metallic Glass Using a Hydrothermal-Electrochemical Method (Nobuhiro Matsushita
Naota Sugiyama
Sayaka Maruyama
Rieko Ito
Kenichi Katsumata
Masahiro Yoshimura
Masahiro Tsukamoto
Xinmin Wang
Takeshi Wada
Akihisa Inoue
and Kiyoshi Okada). Low Temperature Bonding of Bulk Metallic Glass Using an Ultrasonic Process (Hiroshi Nishikawa
Krit WongPiromsarn
Hiroya Abe
Tadashi Takemoto
Masao Kubo
Yoshiharu Sanagawa
Takamasa Sakai
Mikio Fukuhara
and Akihisa Inoue ). Microstructure and Properties of a Ni-Based Metallic Glass Coating Produced by Gas Tunnel Type Plasma Spraying (Akira Kobayashi
Toshio Kuroda
Hisamichi Kimura
and Akihisa Inoue). Tensile Behavior of Zr-Based Bulk Metallic Glass in High-Speed Tensile Tests (Yoshihiro Sakino
Toshio Kuroda
and You-Chul Kim). Microstructure Formation on a Titanium-Based Bulk Metallic Glass Plate by Femtosecond Laser Irradiation (Masahiro Tsukamoto
Togo Shinonaga
Nobuhiro Matsushita
Xinmin Wang
Takeshi Wada
and Nobuyuki Abe). Laser Butt Welding of Mg-Based Metallic Glass (Takeshi Terajima
Kazuhiro Nakata
Hisamichi Kimura
and Akihisa Inoue). Terahertz Wave Properties of Micro Patterned Titania and Metallic Glass Particles in Hexagonal Tablets Fabricated Using Microstereolithography ( Soshu Kirihara
Naoki Komori
Maasa Nakano
Noritoshi Ohta
and Toshiki Niki). Thermal Stability of Zr55Cu30Ni5Al10 Metallic Glass in Contact with Aluminum (Masakatsu Maeda
Yasuo Takahashi
and Akihisa Inoue). Laser Welding of Zr55Cu30Al10Ni5 Bulk Metallic Glass (M. Ashour
S. Katayama
T. Kuroda
and H. Kimura). NANO-PARTICLES AND POWDERS. Nanostructured (Y1-xGdx)2O3:Eu3+ Powders Obtained through Aerosol Synthesis (Katarina R. Marinkovic
LidijaT. Mancic
Maria Eugenia Rabanal
Luz Gomez
Miroslav Dramicanin
and Olivera B. Milosevic). A Simple Approach to Form Hydrothermally Stable Templated Hollow Silica Nanoparticles (Raymond V. Rivera Virtudazo
Hideo Watanabe
Masayoshi Fuji
and Minoru Takahashi). Photocatalytic Properties of Titania/Silica Composite Nanoparticles and Gels (Masanori Hirano
Keisuke Ota
and Shunsuke Oya). Pressure Filtration of Phenylalanine-Adsorbed Submicrometer Silicon Carbide Particles (Shinichi Baba
Yoshihiro Hirata
Naoki Matsunaga
and Soichiro Sameshima). Characterization of the Tribological Interface in Low Wear Magneli Type Ceramics (Rolf Waesche
Mathias Woydt
and Birgit Rehmer). Dispersion Behavior and Surface Interaction Control of SiC Nanoparticles in Aqueous Media by Using Polymeric Dispersants (Yosuke Nomura
Motoyuki lijima
and Hidehiro Kamiya). Fibrous Composite Powder Compacts for Thermal Insulation at High Temperature (T. Ohmura
Y. Ito
I. Abe
H. Abe
and M. Naito). Fabrication of Non-Firing Ceramics by Surface Particle Activation Using a Planetary Ball Mill (Apiluck Eiad-ua
Takashi Shirai
Hideo Watanabe
Masayoshi Fuji
Koji Orito
and Minoru Takahashi). Dispersion Behavior of Carbon Black Nanoparticles with a Silane Coupling Agent in an Organic Solvent (Kenji Takebayashi
Yoshinori Tsuji
Shuji Sasabe
Motoyuki lijima
and Hidehiro Kamiya). Morphological Change during Drying in the Synthesis of ZnO Microtubes from an Aqueous Solution (Seiji Yamashita
H. Watanabe
T. Shirai
M. Fuji
and M. Takahashi). Preparation of ZnO/Al2O3 Nanocomposite Particles by Mechanical Treatment ( Satoko Tasaki
Junichi Tatami
Hiromi Nakan
Toru Wakihara
Katsutoshi Komeya
and Takeshi Meguro). INTERFACE CHARACTERIZATION AND CONTROL. Thermal Properties of Materials at Interfaces for Electronic Application ( Seongjin Hwang
Dongsun Kim
Hyungsun Kim). General Analytical Concept and Design Methodology to Producing a Clay-Based Polymer Nanocomposite (Refat A. El-Sheikhy and Mosleh A. Al-Shamrani). Time Dependence of Contact Angle between Silver-Copper-Titanium Alloys and Boron Nitride (Yoshihisa Sechi
Taihei Matsumoto
and Kazuhiro Nakata). Hard X-Ray Photoelectron Spectroscopy Analysis for Organic-Inorganic Hybrid Materials Formation (Ken Cho
Kosuke Takenaka
Yuichi Setsuhara
Masaharu Shiratani
Makoto Sekine.Masaru Hori
Eiji Ikenaga
Hiroki Kondo
Osamu Nakatsuka
and Shigeaki Zaima). Numerical Analysis of Plasma Keyhole Welding of an Aluminum Thin Plate ( Minoru Miyata
Shinichi Tashiro
and Manabu Tanaka). A Simulation Model of a Short Arc Lamp (Y. Tsujimura
K. Yamamoto
and M. Tanaka). ENERGY AND ENVIRONMENT. Some Recent Advances in the Understanding of Gas-Solid Interactions during the Gasification of Brown Coal and Biomass (Chun-Zhu Li). Synthesis and Applications of Porous Carbon Materials in Thailand: A Review of Recent Research (W. Tanthapanichakoon
N. Tonanon
A. Siyasuk
P. Poommarin
N. Thongprachan
and T. Charinpanitkul). Modern Real-Time Characterization of Airborne Nanoparticles (Wladyslaw W. Szymanski and Günter Allmaier). Novel Recycling Process of Waste FRP for Advanced Materials (Akira Kondo
Hiroya Abe
Makio Naito
Yasuko Okuni
Masashi Miura
and Norifumi Isu). Numerical Simulation of Flow and NOx Reduction in a de-NOx Catalyst Honeycomb (Kenji Tanno
Ryoichi Kurose
Hisao Makino
and Satoru Komori). Creation of Triple-Phase-Boundary in a Solid Oxide Fuel Cell Using a Three-Dimensionally Ordered Structure (Hirokazu Munakata
Masashi Otani
Yuki Katsuki
and Kiyoshi Kanamura). Chemical Reductive Preparation of Ni Decorated Conductive Porous Alumina Composite and Its Electro-Performance in Alkaline Solution (Chunxi Hai
Hideo Watanabe
Takashi Shirai
Masayoshi Fuji
Feng Wang
Jingjun Liu
and Minoru Takahashi). Influence of the Functional Groups on Carbon Black Particles on the Zeta-Potential (Masahide Kawaraya
Sumiyo Shimizu
Hideyuki Hisashi
and Hidehiro Kamiya). SMART PROCESSING TECHNOLOGY. Eudragit Polymer Encapsulated Hydroxyapatite Microspheres as a Carrier for the Sustained Release of Small Molecular Drugs (Jianbo Guo
Hui Xu
Shaoning Wang
Sijie Zhang
Hiroya Abe
Xiaoyun Wang
Yanqiu Zhao
and Makio Naito). Preparation of Estradiol Submicron Emulsions to Improve Brain Targeting through the Nasal Route in Rats (Chaoqun Yu
Xiaomei Wang
and Xing Tang). Development of a Combinatorial Plasma Process Analyzer for Advanced R&D of Next Generation Nanodevice Fabrication (Kosuke Takenaka
Ken Cho
Yuichi Setsuhara
Masaharu Shiratani
Makoto Sekine
and Masaru Hori). Spark Plasma Sintering of Carbon Particles Coated with Al2O3 Ceramic ( Weiwu Chen
Yoshinari Miyamoto
Taihei Matsumoto
and Tstsuro Tojo). Plasma-Enhanced Nanoparticles-Beam Deposition for High-Rate Formation of Nanocomposite Films (Kosuke Takenaka
Yuki Nakajima
Yuichi Setsuhara
Hiroya Abe
and Kiyoshi Nogi). Microstructures Formed on Stainless Steel by Femtosecond Laser Irradiation (Hiroshi Honda
Masahiro Tsukamoto
Nobuyuki Abe
Togo Shinonaga
and Masayuki Fujita). Fabrication and Densification of SiC Coated Carbon Microparticles ( Masaharu Nakamura
Yoshinari Miyamoto
Taihei Matsumoto
and Tetsuro Tojo ). Effect of Particle Dispersion on a Gel-Cast Green Body (K. Yoshino
M. Fuji
T. Shirai
and M. Takahashi). Effect of the Polymer Structure in a Gelcast Green Body on Graphitization ( Tomoaki Kato
Takashi Shirai
Hideo Watanabe
Masayoshi Fuji
and Minoru Takahashi). Fabrication of Alumina Diamond Photonic Crystals with Twinned Interfaces to Develop Terahertz Wave Resonators (Toshiki Niki and Soshu Kirihara). Fabrication of Alumina Dental Crowns Using Stereolithography (Mitsuyori Suwa
Soshu Kirihara
and Taiji Sohmura). Structure and Photochemical Properties of a TiO2-In2O3-SnO2-Al2O3 Film Prepared by Electrolysis of an Aqueous Solution (Naoki Matsunaga
Keigo Oshiro
Yoshihiro Hirata
Yousuke Fukuda
Soichiro Sameshima
Toshifumi Yoshidome
and Takamasa Ishigaki). MATERIALS DESIGN. Predicting the Reliability of Brittle Materials (S.W. Freiman and Jeffrey Fong). Effective Methods to Determine Hardness and Toughness of Structural Ceramics (R. Morrell). Design and Reliability of Layered Ceramics (Y. N. Kim
H. G. Shin
J. K. Song
M. C. Shin
B. K. Shin
T. M. Noh
and H. S. Lee). Metallic Bonding with the Use of Copper Compound Powders (Kazuaki lhara
Y. Kobayashi
N. Shibamiya
M. Minato
Y. Yasuda
T. Morita
and S. Yamada). Effect of Plasma Spray Coating Parameters on the Microstructure and Performance of an Alumina/Copper Composite (Kuan Hong Lin
Zi Hao Xu
and Shun Tian Lin). Fabrication of Nano-TiO2 Coated Morphgenetic Carbon and Its Photocatalytic Performance (D. Huang
Y. Miyamoto
T. Matsumoto
T. Tojo
T. Fan
J. Ding
Q. Guo
and D. Zhang). Microstructure and Mechanical Properties of Friction Stir Welded lnconel 718 Alloy (K. H. Song and K. Nakata). In Situ Observation of Phase Transformations in Fe-0.08C Alloy (Di Zhang
Hidenori Terasaki
and Yuichi Komizo). Author Index.