Challenges in Mechanics of Time Dependent Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 2

Proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics
Herausgegeben:Silberstein, Meredith; Amirkhizi, Alireza; Shuman, Xia; Beese, Allison; Berke, Ryan B.; Pataky, Garrett

• Gebundenes Buch

Produktbeschreibung

Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2019 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of six from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas:

Characterization Across Length Scales
Extreme Conditions & Environmental Effects

Soft Materials and Biomaterials

Damage, Fatigue and Fracture

Structure, Function and Performance

Rate Effects in Elastomers

Viscoelasticity & Viscoplasticity

Research in Progress

In-situ Techniques and Microscale Effects on Mechanical Behavior

Fracture and Fatigue in Brittle Materials

Novel Experimental Methods

Fatigue andFracture in Extreme Environments

Integration of Models and Experiments

Failure in Elastomers and Gels

Rate Effects in Elastomers

Microscale and Microstructural Effects on Mechanical Behavior

Mechanics of Energy Materials

Additive Manufacturing: Fatigue and Fracture

Mechanics of Composite Materials

Interfacial and Mixed-Mode Fracture

Vibration Effects and High Cycle Fatigue

Produktdetails

• Conference Proceedings of the Society for Experimental Mechanics Series
• Verlag: Springer / Springer International Publishing / Springer, Berlin
• Artikelnr. des Verlages: 978-3-030-29985-9
• 1st ed. 2020
• Seitenzahl: 180
• Erscheinungstermin: 6. Dezember 2019
• Englisch
• Abmessung: 285mm x 215mm x 16mm
• Gewicht: 676g
• ISBN-13: 9783030299859
• ISBN-10: 3030299856
• Artikelnr.: 57158512

Autorenporträt

Meredith Silberstein, Cornell University, Ithaca, NY, USA; Alireza Amirkhizi University of Massachusetts- Lowell, MA, USA.  Shuman Xia - Georgia Institute of Technology, USA; Allison Beese -Pennsylvania State University, USA; Ryan Berke-Utah State University, USA; Garrett Pataky-Clemson University, USA  

Inhaltsangabe

1. Dynamic Analysis of Vehicle Performance for Changes to Rear Axle Housing.- 2. A Comparative Study of Crack Branching In Glass Using Photoelasticity, Digital Image Correlation and Digital Gradient Sensing Techniques.- 3. Hand-Transmitted Vibration with Simple Solution Starting by Weed Walker.- 4. Effect of Loading Rate on Fracture Behavior of Carbon Fiber Reinforced Polymer Composites.- 5. Experimental Measurements of Overload and Underloads On Fatigue Crack Growth Using Digital Image Correlation.- 6. Exploring Microstructural Descriptors in Elastomeric Foams Using Digital Image Correlation and Statistical Analysis.- 7. Effect of Crystallization on Mechanical Properties of CFRTP.- 8. Mode I Traction-Separation Relationship of Sylgard 184 - Aluminum Interface Using Rigid Double Cantilever Beam Analysis.- 9. Solid Cylindrical Bar Torsion for Characterizing Shear Plastic Deformation and Failure.- 10. Mixed Mode (Mode I/III) Dynamic Fracture Initiation Toughness of Aluminum Alloy.- 11. Incremental 1D Viscoelastic Model for Residual Stress and Shape Distortion Analysis During Composite Manufacturing Processes.- 12. Investigating How Microstructural Features Influence Stress Intensities in Pitting Corrosion.- 13. Evaluating the Influence of Size Effects on Load-Displacement Behavior and Failure in Threaded Fasteners, Part I: Experimental Testing.- 14. Investigation of Dynamic Fracture Behavior of Additively Manufactured Al-10Si-Mg Using High-Speed Synchrotron X-ray Imaging.- 15. A Simplified Investigation into Fatigue Viability of Additively Manufactured IN-718.- 16. A Post-mortem Analysis of the Strain-induced Crystallization Effects on Fatigue of Elastomers.- 17. Analysis of Crack Growth in Compressor Blade Root Subjected to Fatigue.- 18. An Automated Technique to Analyze Micro Indentation Load - Displacement Curve.- 19. Mechanics and Mechanisms of Slow Crack Propagation inBrittle Hydrogels.- 20. Viscoelastoplastic Damage with Maximum Rate of Dissipation-Based Growth Criterion and Tri-Component Lie Rate Decomposition.- 21. Validation of Free-Free Vibration Test Method for Fatigue and Damping Characterization of Thin Structures.- 22. Improved High-Throughput Measurement of High Cycle Fatigue Examination.- 23. Application of Linear Viscoelastic Continuum Damage Theory to the low and high Strain rate Response of Thermoplastic Polyurethane.- 24. Shear Property Characterization of Hydrogels.- 25. High Temperature Low-Cycle Fatigue and Creep-Fatigue Behavior of Fe-25Ni-20Cr Austenitic Stainless Steel.- 26. Thermo-Mechanical Characterization of Polyurea Hybrid Blend Variants.- 27. Milled Carbon Fiber Polyurea Elastomeric Composites.

---

1. Dynamic Analysis of Vehicle Performance for Changes to Rear Axle Housing.- 2. A Comparative Study of Crack Branching In Glass Using Photoelasticity, Digital Image Correlation and Digital Gradient Sensing Techniques.- 3. Hand-Transmitted Vibration with Simple Solution Starting by Weed Walker.- 4. Effect of Loading Rate on Fracture Behavior of Carbon Fiber Reinforced Polymer Composites.- 5. Experimental Measurements of Overload and Underloads On Fatigue Crack Growth Using Digital Image Correlation.- 6. Exploring Microstructural Descriptors in Elastomeric Foams Using Digital Image Correlation and Statistical Analysis.- 7. Effect of Crystallization on Mechanical Properties of CFRTP.- 8. Mode I Traction-Separation Relationship of Sylgard 184 - Aluminum Interface Using Rigid Double Cantilever Beam Analysis.- 9. Solid Cylindrical Bar Torsion for Characterizing Shear Plastic Deformation and Failure.- 10. Mixed Mode (Mode I/III) Dynamic Fracture Initiation Toughness of Aluminum Alloy.- 11. Incremental 1D Viscoelastic Model for Residual Stress and Shape Distortion Analysis During Composite Manufacturing Processes.- 12. Investigating How Microstructural Features Influence Stress Intensities in Pitting Corrosion.- 13. Evaluating the Influence of Size Effects on Load-Displacement Behavior and Failure in Threaded Fasteners, Part I: Experimental Testing.- 14. Investigation of Dynamic Fracture Behavior of Additively Manufactured Al-10Si-Mg Using High-Speed Synchrotron X-ray Imaging.- 15. A Simplified Investigation into Fatigue Viability of Additively Manufactured IN-718.- 16. A Post-mortem Analysis of the Strain-induced Crystallization Effects on Fatigue of Elastomers.- 17. Analysis of Crack Growth in Compressor Blade Root Subjected to Fatigue.- 18. An Automated Technique to Analyze Micro Indentation Load - Displacement Curve.- 19. Mechanics and Mechanisms of Slow Crack Propagation inBrittle Hydrogels.- 20. Viscoelastoplastic Damage with Maximum Rate of Dissipation-Based Growth Criterion and Tri-Component Lie Rate Decomposition.- 21. Validation of Free-Free Vibration Test Method for Fatigue and Damping Characterization of Thin Structures.- 22. Improved High-Throughput Measurement of High Cycle Fatigue Examination.- 23. Application of Linear Viscoelastic Continuum Damage Theory to the low and high Strain rate Response of Thermoplastic Polyurethane.- 24. Shear Property Characterization of Hydrogels.- 25. High Temperature Low-Cycle Fatigue and Creep-Fatigue Behavior of Fe-25Ni-20Cr Austenitic Stainless Steel.- 26. Thermo-Mechanical Characterization of Polyurea Hybrid Blend Variants.- 27. Milled Carbon Fiber Polyurea Elastomeric Composites.