Developments in the Science and Technology of Composite Materials
Fourth European Conference on Composite Materials September 25¿28, 1990 Stuttgart-Germany Herausgegeben von Fuller, J.; Gruninger, G.; Schulte, K.; Bunsell, A. R.; Massiah, A.
Developments in the Science and Technology of Composite Materials
Fourth European Conference on Composite Materials September 25¿28, 1990 Stuttgart-Germany Herausgegeben von Fuller, J.; Gruninger, G.; Schulte, K.; Bunsell, A. R.; Massiah, A.
The European Conference on Composite Materials (ECCM-4) will be held for the first time, in Germany after the successes of previous meetings in France and England. The meeting will take place in Stuttgart which is capital of B aden-Wtirttemberg and a centre for new technologies in Germany. Amongst these new technologies, composite materials play a dominant role and it is the aim of the conference to promote scientific discussion of these materials. Polymer matrix composites are well established and lie at the centre of interest so that a great number of contributions forms on plastic matrix…mehr
The European Conference on Composite Materials (ECCM-4) will be held for the first time, in Germany after the successes of previous meetings in France and England. The meeting will take place in Stuttgart which is capital of B aden-Wtirttemberg and a centre for new technologies in Germany. Amongst these new technologies, composite materials play a dominant role and it is the aim of the conference to promote scientific discussion of these materials. Polymer matrix composites are well established and lie at the centre of interest so that a great number of contributions forms on plastic matrix and high temperature resin matrix composites. New developments in the area of reinforcement fibres will be discussed in a special section of the poster session. Metal matrix and ceramic matrix composites as well as carbon fibre reinforced carbon are strong candidates for future structural materials. These classes of composites receive wide interest at the conference. The conference organisers received more than 250 abstracts, from which about 160 contributed papers from 20 countries were accepted. In addition to the' 80 oral presentations five invited papers on topics of special interest will be given. The recycling problem of fiber reinforced composites will be discussed in a plenary paper. In the name of all those who were involved in preparation and organisation of this conference, we hope that fruitful discussions but also the social gathering will contribute to further steps in deepening the European cooperation in this fascinating composite research field.Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Plenary Papers.- Fabrication/Fertigung.- A novel method and material for the processing of glass mat reinforced thermoplastics (GMT) .- Electron beam curing of composites .- Experimental investigation of the superplastic forming technique using continuous carbon fiber reinforced PEEK .- Laser processing of thermoplastic matrix filament wound composites .- Fabrication of constructional composite materials based on powder polymer binders .- Processing concept for tubes made of long fibre reinforced thermoplastics .- Filament winding control processes .- Adhesion and welding of continuous carbon-fiber reinforced polyether etherketone (CF-PEEK/APC2).- An extended model for the forming simulation of fabric reinforced thermoplastic prepregs .- A novel tool to determine the optimum fabrication parameters of thermoplastic CFRP laminates .- Stamp forming of continuous fiber/polypropylene composites .- Automatic laying of unidirectional prepreg tapes on compound surfaces .- Performance analysis of a SMC panel moulding .- Injection molding of long-fiber-reinforced thermoplastics .- Fatigue/Ermüdung.- Residual strength and toughness of damaged composites .- Characterizing pure mode I delamination using multidirectional DCB specimens for glass/epoxy .- Wind turbine rotor blades under fatigue loads .- Is crack closure due to fatigue loading causing more damage in carbon fibre reinforced epoxy composites? .- Damage rates for interlaminar failure of fatigued CFRP laminates .- The mechanics of fatigue damage in structural composite materials .- Fatigue damage analysis of notched carbon/epoxy composite by spate and finite element method .- The effect of resin flexibility on the CREEP behaviour of filament-wound glass-reinforced resin pipes .- Compressive fatigue damage in T800/924C carbon fibre-epoxy laminates with an open hole .- Monitoring anomalies in composite components by means of vibration analysis .- Interfaces/Grenzflächen.- Interfaces in AL2O3 fibre reinforced aluminium alloys .- TEM characterisation of fibre-matrix interactions in light alloy MMC containing alumina fibres .- Characterisation of the squeeze cast M6-alloy AS41 with AL2O3 fibers .- The interfacial role of silica on ceramic fibre-reinforced aluminium alloy composites .- Microstructural studies of alumina fibre reinforced aluminium alloy .- Fundamental investigations for the development of coatings in metal matrix composites .- On interfaces in C-fibre reinforced magnesium alloys .- Metal Matr.- Measurement and analysis of the stiffness and Bauschinger effect during loading and unloading of a carbon fiber and aluminum matrix composite .- Micromechanical modelization of the influence of microstructure on the behavior and damage of a Gr/AL composite .- Corrosion studies on metal matrix composites .- Characterization of aluminium oxide (FP) fibre reinforced AI-2,5Li-Composites .- Tensile and fracture toughness behaviour of reinforced magnesium composites .- The corrosion characteristics of a model C/AI metal matrix composite .- Fibres-reinforced Zinc-Aluminium matrix composites for improved CREEP resistance and fracture toughness .- High temperature low cycle fatigue of a SiC/Ti matrix composite .- Continuous SiC fiber reinforced metals .- SiC-Fibre reinforced titanium alloys: processing, interfaces and mechanical properties .- Manufacture, microstructure and property relationship for a fibre reinforced metal .- Influence of safimax fibres on microstructure and microsegregation in an aluminium alloy .- Orientation of short reinforcing fibers in metal matrix composite materials .- Fatigue of alumina short fiber/aluminium alloy composites .- Deformation mode of fibre metal composites under impact compression .- A characterization of the fibre-matrix bond in single SiC filament aluminium matrix composites by theoretical and experimental approach of the multifragmentation .- Several results on the mechanical behaviour of metal matrix composites with unidirectional fibers or ne
Plenary Papers.- Fabrication/Fertigung.- A novel method and material for the processing of glass mat reinforced thermoplastics (GMT) .- Electron beam curing of composites .- Experimental investigation of the superplastic forming technique using continuous carbon fiber reinforced PEEK .- Laser processing of thermoplastic matrix filament wound composites .- Fabrication of constructional composite materials based on powder polymer binders .- Processing concept for tubes made of long fibre reinforced thermoplastics .- Filament winding control processes .- Adhesion and welding of continuous carbon-fiber reinforced polyether etherketone (CF-PEEK/APC2).- An extended model for the forming simulation of fabric reinforced thermoplastic prepregs .- A novel tool to determine the optimum fabrication parameters of thermoplastic CFRP laminates .- Stamp forming of continuous fiber/polypropylene composites .- Automatic laying of unidirectional prepreg tapes on compound surfaces .- Performance analysis of a SMC panel moulding .- Injection molding of long-fiber-reinforced thermoplastics .- Fatigue/Ermüdung.- Residual strength and toughness of damaged composites .- Characterizing pure mode I delamination using multidirectional DCB specimens for glass/epoxy .- Wind turbine rotor blades under fatigue loads .- Is crack closure due to fatigue loading causing more damage in carbon fibre reinforced epoxy composites? .- Damage rates for interlaminar failure of fatigued CFRP laminates .- The mechanics of fatigue damage in structural composite materials .- Fatigue damage analysis of notched carbon/epoxy composite by spate and finite element method .- The effect of resin flexibility on the CREEP behaviour of filament-wound glass-reinforced resin pipes .- Compressive fatigue damage in T800/924C carbon fibre-epoxy laminates with an open hole .- Monitoring anomalies in composite components by means of vibration analysis .- Interfaces/Grenzflächen.- Interfaces in AL2O3 fibre reinforced aluminium alloys .- TEM characterisation of fibre-matrix interactions in light alloy MMC containing alumina fibres .- Characterisation of the squeeze cast M6-alloy AS41 with AL2O3 fibers .- The interfacial role of silica on ceramic fibre-reinforced aluminium alloy composites .- Microstructural studies of alumina fibre reinforced aluminium alloy .- Fundamental investigations for the development of coatings in metal matrix composites .- On interfaces in C-fibre reinforced magnesium alloys .- Metal Matr.- Measurement and analysis of the stiffness and Bauschinger effect during loading and unloading of a carbon fiber and aluminum matrix composite .- Micromechanical modelization of the influence of microstructure on the behavior and damage of a Gr/AL composite .- Corrosion studies on metal matrix composites .- Characterization of aluminium oxide (FP) fibre reinforced AI-2,5Li-Composites .- Tensile and fracture toughness behaviour of reinforced magnesium composites .- The corrosion characteristics of a model C/AI metal matrix composite .- Fibres-reinforced Zinc-Aluminium matrix composites for improved CREEP resistance and fracture toughness .- High temperature low cycle fatigue of a SiC/Ti matrix composite .- Continuous SiC fiber reinforced metals .- SiC-Fibre reinforced titanium alloys: processing, interfaces and mechanical properties .- Manufacture, microstructure and property relationship for a fibre reinforced metal .- Influence of safimax fibres on microstructure and microsegregation in an aluminium alloy .- Orientation of short reinforcing fibers in metal matrix composite materials .- Fatigue of alumina short fiber/aluminium alloy composites .- Deformation mode of fibre metal composites under impact compression .- A characterization of the fibre-matrix bond in single SiC filament aluminium matrix composites by theoretical and experimental approach of the multifragmentation .- Several results on the mechanical behaviour of metal matrix composites with unidirectional fibers or ne
Es gelten unsere Allgemeinen Geschäftsbedingungen: www.buecher.de/agb
Impressum
www.buecher.de ist ein Internetauftritt der buecher.de internetstores GmbH
Geschäftsführung: Monica Sawhney | Roland Kölbl | Günter Hilger
Sitz der Gesellschaft: Batheyer Straße 115 - 117, 58099 Hagen
Postanschrift: Bürgermeister-Wegele-Str. 12, 86167 Augsburg
Amtsgericht Hagen HRB 13257
Steuernummer: 321/5800/1497
USt-IdNr: DE450055826
