Electric Power Systems
By Weedy, Brian; Cory, B. J.; Jenkins, Nick; Ekanayake, Janaka; Strbac, Gordon
Versandkostenfrei*
Versandfertig in über 4 Wochen
Electric Power Systems
By Weedy, Brian; Cory, B. J.; Jenkins, Nick; Ekanayake, Janaka; Strbac, Gordon
- Gebundenes Buch
The definitive textbook for Power Systems students, providing a grounding in essential power system theory while also focusing on practical power engineering applications.
Electric Power Systems has been an essential book in power systems engineering for over thirty years. Bringing the content firmly up-to-date whilst still retaining the flavour of Weedy's extremely popular original, this Fifth Edition has been revised by experts Nick Jenkins, Janaka Ekanayake and Goran Strbac. This wide-ranging text still covers all of the fundamental power systems subjects but is now expanded to cover…mehr
- Haitham Abu-RubPower Electronics for Renewable Energy Systems, Transportation and Industrial Applications199,99 €
- Zongxiang LuIntegration of Large Scale Wind Energy with Electrical Power Systems in China167,99 €
- Jean-Claude SabonnadièreLow Emission Power Generation Technologies and Energy Management228,99 €
- Kamran SharifabadiDesign, Control, and Application of Modular Multilevel Converters for Hvdc Transmission Systems158,99 €
- Zhen ZhangWireless Power Transfer142,99 €
- Swagata DasFault Location on Transmission and Distribution Lines145,99 €
- Tsai-Fu WuOrigin of Power Converters154,99 €
-
-
-
Electric Power Systems has been an essential book in power systems engineering for over thirty years. Bringing the content firmly up-to-date whilst still retaining the flavour of Weedy's extremely popular original, this Fifth Edition has been revised by experts Nick Jenkins, Janaka Ekanayake and Goran Strbac. This wide-ranging text still covers all of the fundamental power systems subjects but is now expanded to cover increasingly important topics like climate change and renewable power generation. Updated material includes an analysis of today's markets and an examination of the current economic state of power generation. The physical limits of power systems equipment - currently being tested by the huge demand for power - is explored, and greater attention is paid to power electronics, voltage source and power system components, amongst a host of other updates and revisions.
Supplies an updated chapter on power system economics and management issues and extended coverage of power system components. Also expanded information on power electronics and voltage source, including VSC HVDC and FACTS.
Updated to take into account the challenges posed by different world markets, and pays greater attention to up-to-date renewable power generation methods such as wind power.
Includes modernized presentation and greater use of examples to appeal to today's students, also retains the end of chapter questions to assist with the learning process. Also shows students how to apply calculation techniques.
- Produktdetails
- Verlag: Wiley & Sons
- 5. Aufl.
- Seitenzahl: 512
- Erscheinungstermin: 10. August 2012
- Englisch
- Abmessung: 250mm x 175mm x 32mm
- Gewicht: 1059g
- ISBN-13: 9780470682685
- ISBN-10: 047068268X
- Artikelnr.: 35001152
- Verlag: Wiley & Sons
- 5. Aufl.
- Seitenzahl: 512
- Erscheinungstermin: 10. August 2012
- Englisch
- Abmessung: 250mm x 175mm x 32mm
- Gewicht: 1059g
- ISBN-13: 9780470682685
- ISBN-10: 047068268X
- Artikelnr.: 35001152
Revised Edition xiii Preface to Fourth Edition xv Preface to Fifth Edition
xvi Symbols xvii 1 Introduction 1 1.1 History 1.2 Characteristics
Influencing Generation and Transmission 1.3 Operation of Generators 1.4
Energy Conversion 1.5 Renewable Energy Sources 1.6 Energy Storage 1.7
Environmental Aspects of Electrical Energy 1.8 Transmission and
Distribution Systems 1.9 Utilization Problems 2 Basic Concepts 2.1
Three-Phase Systems 2.2 Three-Phase Transformers 2.3 Active and Reactive
Power 2.4 The Per-Unit System 2.5 Power Transfer and Reactive Power 2.6
Harmonics in Three-Phase Systems 2.7 Useful Network Theory Problems 3
Components of a Power System 3.1 Introduction 3.2 Synchronous Machines 3.3
Equivalent Circuit Under Balanced Short-Circuit Conditions 3.4 Synchronous
Generators in Parallel 3.5 The Operation of a Generator on Infinite Busbars
3.6 Automatic Voltage Regulators (AVRs) 3.7 Lines, Cables, and Transformers
3.8 Transformers 3.9 Voltage Characteristics of Loads Problems 4 Control of
Power and Frequency 4.1 Introduction 4.2 The Turbine Governor 4.3 Control
Loops 4.4 Division of Load between Generators 4.5 The Power-Frequency
Characteristic of an Interconnected System 4.6 System Connected by Lines of
Relatively Small Capacity Problems 5, Control of Voltage and Reactive Power
5.1 Introduction 5.2 The Generation and Absorption of Reactive Power 5.3
Relation Between Voltage, Power, and Reactive Power at a Node 5.4 Methods
of Voltage Control: (i) Injection of Reactive Power 5.5 Methods of Voltage
Control: (ii) Tap-Changing Transformers 5.6 Combined Use of Tap-Changing
Transformers and Reactive-Power Injection 5.7 Phase shift trasnformer 5.8
Voltage Collapse 5.9 Voltage Control in Distribution Networks 5.10 Long
Lines 5.11 General System Considerations Problems 6 Load Flows 6.1
Introduction 6.2 Circuit analysis versus load flow analysis 6.3 Gauss
Siedal method 6.4 Load flows in radial and simple loop networks 6.4 Load
flows in Large Systems 6.5 Example of a Complex Load Flow 6.6 Computer
simulations Problems 7 Fault Analysis 7.1 Introduction 7.2 Calculation of
Three-Phase Balanced Fault Currents 7.3 Method of Symmetrical Components
7.4 Representation of Plant in the Phase-Sequence Networks 7.5 Types of
Fault 7.6 Fault Levels in a Typical System 7.7 Power in Symmetrical
Components 7.8 Systematic Methods for Fault Analysis in Large Networks 7.9
Neutral Grounding 7.11 Interference with Communication
Circuits--Electromagnetic Compatibility (EMC) Problems 8 System Stability
8.1 Introduction 8.2 Equation of Motion of a Rotating Machine 8.3
Steady-State Stability 8.4 Transient Stability 8.5 Transient
Stability--Consideration of Time 8.6 Transient Stability Calculations by
Computer 8.7 Dynamic or small signal stability 8.8 Stability of Loads
Leading to Voltage Collapse 8.9 Further Aspects 8.10 Multimachine Systems
8.11 Energy-Type Functions 8.12 Improvement of stability Problems 9
Direct-Current Transmission 9.1 Introduction 9.2 Current Source and Voltage
Source Converters 9.3 Semi-conductor Valves for High Voltage DC Converters
9.4 Current Source h.v.d.c. 9.5 Voltage Source h.v.d.c. Problems 10
Overvoltages and Insulation Requirements 10.1 Introduction 10.2 Generation
of Overvoltages 10.3 Protection Against Overvoltages 10.4 Insulation
Coordination 10.5 Propagation of Surges 10.6 Determination of System
Voltages Produced by Travelling Surges 10.7 Electromagnetic Transient
Program (EMTP) Problems 11 Substations and Protection 11.1 Introduction
11.2 Switchgear 11.3 Qualities Required of Protection 11.4 Components of
Protective Schemes 11.5 Protection Systems 11.6 Distance Protection 11.7
Unit Protection Schemes 11.8 Generator Protection 11.9 Transformer
Protection 11.10 Feeder Protection 11.11 System Monitoring and Control
11.12 System Security and Emergency Control Problems 12 Fundamentals of the
Economics of Operation and Planning of Electricity Systems 12.1 Economic
Operation of Generation Systems 12.2 Fundamental principles of Generation
System Planning 12.3 Economic Operation of Transmission Systems 12.4
Fundamental principles of Transmission System Planning 12.5 Distribution
and Transmission Network security considerations 12.6 Drivers for change
Problems Appendix I Synchronous Machine Reactances Appendix II Typical
Transformer Impedances Appendix Ill Typical Overhead Line Parameters
Bibliography and Further Reading Index
Revised Edition xiii Preface to Fourth Edition xv Preface to Fifth Edition
xvi Symbols xvii 1 Introduction 1 1.1 History 1.2 Characteristics
Influencing Generation and Transmission 1.3 Operation of Generators 1.4
Energy Conversion 1.5 Renewable Energy Sources 1.6 Energy Storage 1.7
Environmental Aspects of Electrical Energy 1.8 Transmission and
Distribution Systems 1.9 Utilization Problems 2 Basic Concepts 2.1
Three-Phase Systems 2.2 Three-Phase Transformers 2.3 Active and Reactive
Power 2.4 The Per-Unit System 2.5 Power Transfer and Reactive Power 2.6
Harmonics in Three-Phase Systems 2.7 Useful Network Theory Problems 3
Components of a Power System 3.1 Introduction 3.2 Synchronous Machines 3.3
Equivalent Circuit Under Balanced Short-Circuit Conditions 3.4 Synchronous
Generators in Parallel 3.5 The Operation of a Generator on Infinite Busbars
3.6 Automatic Voltage Regulators (AVRs) 3.7 Lines, Cables, and Transformers
3.8 Transformers 3.9 Voltage Characteristics of Loads Problems 4 Control of
Power and Frequency 4.1 Introduction 4.2 The Turbine Governor 4.3 Control
Loops 4.4 Division of Load between Generators 4.5 The Power-Frequency
Characteristic of an Interconnected System 4.6 System Connected by Lines of
Relatively Small Capacity Problems 5, Control of Voltage and Reactive Power
5.1 Introduction 5.2 The Generation and Absorption of Reactive Power 5.3
Relation Between Voltage, Power, and Reactive Power at a Node 5.4 Methods
of Voltage Control: (i) Injection of Reactive Power 5.5 Methods of Voltage
Control: (ii) Tap-Changing Transformers 5.6 Combined Use of Tap-Changing
Transformers and Reactive-Power Injection 5.7 Phase shift trasnformer 5.8
Voltage Collapse 5.9 Voltage Control in Distribution Networks 5.10 Long
Lines 5.11 General System Considerations Problems 6 Load Flows 6.1
Introduction 6.2 Circuit analysis versus load flow analysis 6.3 Gauss
Siedal method 6.4 Load flows in radial and simple loop networks 6.4 Load
flows in Large Systems 6.5 Example of a Complex Load Flow 6.6 Computer
simulations Problems 7 Fault Analysis 7.1 Introduction 7.2 Calculation of
Three-Phase Balanced Fault Currents 7.3 Method of Symmetrical Components
7.4 Representation of Plant in the Phase-Sequence Networks 7.5 Types of
Fault 7.6 Fault Levels in a Typical System 7.7 Power in Symmetrical
Components 7.8 Systematic Methods for Fault Analysis in Large Networks 7.9
Neutral Grounding 7.11 Interference with Communication
Circuits--Electromagnetic Compatibility (EMC) Problems 8 System Stability
8.1 Introduction 8.2 Equation of Motion of a Rotating Machine 8.3
Steady-State Stability 8.4 Transient Stability 8.5 Transient
Stability--Consideration of Time 8.6 Transient Stability Calculations by
Computer 8.7 Dynamic or small signal stability 8.8 Stability of Loads
Leading to Voltage Collapse 8.9 Further Aspects 8.10 Multimachine Systems
8.11 Energy-Type Functions 8.12 Improvement of stability Problems 9
Direct-Current Transmission 9.1 Introduction 9.2 Current Source and Voltage
Source Converters 9.3 Semi-conductor Valves for High Voltage DC Converters
9.4 Current Source h.v.d.c. 9.5 Voltage Source h.v.d.c. Problems 10
Overvoltages and Insulation Requirements 10.1 Introduction 10.2 Generation
of Overvoltages 10.3 Protection Against Overvoltages 10.4 Insulation
Coordination 10.5 Propagation of Surges 10.6 Determination of System
Voltages Produced by Travelling Surges 10.7 Electromagnetic Transient
Program (EMTP) Problems 11 Substations and Protection 11.1 Introduction
11.2 Switchgear 11.3 Qualities Required of Protection 11.4 Components of
Protective Schemes 11.5 Protection Systems 11.6 Distance Protection 11.7
Unit Protection Schemes 11.8 Generator Protection 11.9 Transformer
Protection 11.10 Feeder Protection 11.11 System Monitoring and Control
11.12 System Security and Emergency Control Problems 12 Fundamentals of the
Economics of Operation and Planning of Electricity Systems 12.1 Economic
Operation of Generation Systems 12.2 Fundamental principles of Generation
System Planning 12.3 Economic Operation of Transmission Systems 12.4
Fundamental principles of Transmission System Planning 12.5 Distribution
and Transmission Network security considerations 12.6 Drivers for change
Problems Appendix I Synchronous Machine Reactances Appendix II Typical
Transformer Impedances Appendix Ill Typical Overhead Line Parameters
Bibliography and Further Reading Index