Environmental Geomechanics

Herausgegeben von Schrefler, Bernard; Delage, Pierre

• Gebundenes Buch

Produktbeschreibung

This title covers topics that are of increasing importance in engineering practice: natural hazards, pollution and environmental protection through good practice. The first part of the book deals with natural risk factors, of both natural and human origin, that should be borne in mind. The second part is devoted to pollution and polluted sites and their repercussions, a facet of growing significance given the increasing reclamation of land from abandoned industrial sites for urban development over the last 20 years. Different types of oil pollution and methods of decontamination are described, followed by a discussion of waste management and detailed coverage of confinement liners used in surface waste disposal.

---

Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.

Produktdetails

• Verlag: ISTE / Wiley & Sons
• 1. Auflage
• Seitenzahl: 544
• Erscheinungstermin: 23. August 2010
• Englisch
• Abmessung: 234mm x 157mm x 33mm
• Gewicht: 907g
• ISBN-13: 9781848211667
• ISBN-10: 184821166X
• Artikelnr.: 28707921

Autorenporträt

Bernard Schrefler is professor of Structural Mechanics at the University of Padua. He received his Ph.D. at the University of Wales Swansea where he obtained subsequently a Doctor of Science degree. He was awarded an Honorary Doctor of Science from the St. Petersburg State Polytechnical University, from the Technical University of Lodz and an Honorary Degree from the University of Wales Swansea as well as a Honorary Guest Professorship from the University of Technology of Dalian. He is author of over 350 publications, author/co-author of 5 textbooks and editor/co-editor of 18 monographs and conference proceedings and is associate editor of Computer Methods in Applied Mechanics & Engineering, regional editor of Mechanics Research Communications and serves on the editorial board of 16 International Journals. Pierre Delage is Professor of Geotechnical Engineering at Ecole Nationale des Ponts et Chaussées (ENPC), Paris, France and Head of CERMES, the Centre? for Teaching and Research in Soil Mechanics of ENPC. He is also Vice-Chairman of the French Geotechnical Association (CFMS), he has been Chief-Editor from 2000 to 2004 of the Revue Française de Géotechnique. He also participates to the Editorial Boards of Géotechnique (2000-2003), of the Geotechnical Testing Journal, ASTM (1997-present) and of Computers and Geotechnics, Elsevier, (2000-present). His main research areas concern the coupled thermo-hydro-mechanical behaviour of soils with applications to unsaturated soils, polluted soils, nuclear waste confinement, soil microstructure, deep marine sediments. He is co-editor of 4 books and has published more than 150 scientific papers. He is frequently invited as panellist or Keynote lecturer in Internatonal Conferences.

Inhaltsangabe

Introduction xiii
Chapter 1. Debris Flows 1
Christophe ANCEY
1.1. Introduction 1
1.2. Typology of torrential flows 2
1.3. Initiation, motion and effects of debris flows 6
1.4. Modeling debris flows 12
1.5. Bibliography 30
Chapter 2. Snow Avalanches 39
Christophe ANCEY
2.1. Introduction 39
2.2. Modeling avalanches 45
2.3. Bibliography 65
Chapter 3. Instability of Soil Masses 73
Laurent VULLIET
3.1. Introduction 73
3.2. Slowly moving slopes 75
3.3. Limit state analysis 78
3.4. Case of non-saturated masses 84
3.5. Conclusion and prospects 90
3.6. Bibliography 91
Chapter 4. Instability of Rock Masses 93
François DESCOEUDRES
4.1. Introduction 93
4.2. Cliff stability and toppling 94
4.3. Contact-impact 99
4.4. Flight trajectory 101
4.5. Sliding and rolling 103
4.6. Impact on an embankment (safety embankment) 107
4.7. Capacity of the protective structures 111
4.8. Conclusion 114
4.9. Bibliography 114
Chapter 5. Subsidence Phenomena 117
Bernhard SCHREFLER and Luciano SIMONI
5.1. Subsidence caused by water withdrawal 117
5.2. Artificially-induced land uplift 141
5.3. Conclusions 146
5.4. Bibliography 147
Chapter 6. Soil Collapse due to Water Infiltration 149
Yu-Jun CUI and Pierre DELAGE
6.1. Introduction 149
6.2. The loess in Northern France 151
6.3. Conclusion 165
6.4. Bibliography 167
Chapter 7. Subsidence Induced by Fossil Fuel Extraction 171
Christian SCHROEDER, Yu-Jun CUI and Bernhard SCHREFLER
7.1. Introduction 171
7.2. Subsidence due to coal extraction 172
7.3. Recap of the basic Barcelona mode1 176
7.4. Subsidence due to oil exploitation 179
7.5. Subsidence due to the exploitation of gas reservoirs 185
7.6. Acknowledgements 197
7.7. Bibliography 197
Chapter 8. Deterioration of Stone in Monuments 201
Véronique VERGÈS-BELMIN
8.1. Introduction 201
8.2. Intrinsic degradation factors 202
8.3. Extrinsic degradation factors 214
8.4. Acknowledgements 240
8.5. Bibliography 240
Chapter 9. The Physics of Water Transfer in Stone 247
Jean-Paul LAURENT
9.1. General concepts and terminology 247
9.2. Water in stones: capillarity 250
9.3. Modeling water transfer in stone 263
9.4. Bibliography 271
Chapter 10. Experimental Techniques for Characterizing Alterations 275
Claude BRUNJAIL, Guy BASTIAN, Grégoire CHÉNÉ and Véronique VERGÈS-BELMIN.
Updated by Philippe BROMBLET
10.1. Laboratory and in situ testing 275
10.2. Hydric and thermal transfers: specific techniques 296
10.3. Bibliography 303
Chapter 11. Case Studies 313
Jean GODIN, Claude BRUNJAIL, Véronique VERGÈS-BELMIN and Ann BOURGÈS
11.1. Notre-Dame-la-Grande Church in Poitiers, in situ study 313
11.2. Research on earthen plaster stabilized with bitumen and polychrome
decoration: Navrongo
cathedral, North Ghana 321
11.3. Bibliography 330
Chapter 12. The Nature and Survey of Soil Pollution 333
Abdelmalek BOUAZZA, Pierre DELAGE and Michel WOJNAROWICZ
12.1. Introduction 333
12.2. The nature of soil pollution 334
12.3. The survey of contaminated sites 339
12.4. Conclusions 356
12.5. Bibliography 357
Chapter 13. Retention and Transfer of Soluble Chemical Pollutants:
Mechanisms and Numerical
Modeling 361
Robert CHARLIER and Jean-Pol RADU
13.1. Introduction 361
13.2. Ideal pollutant transport in an ideal continuous medium 362
13.3. Pollutant retention phenomena 366
13.4. Balance equations 369
13.5. Numerical modeling of transport by advection 371
13.6. Finite elements modeling of the problem with advection and diffusion
372
13.7. Examples and applications 380
13.8. Conclusions 388
13.9. Acknowledgments 388
13.10. Bibliography 389
13.11. Notations table 390
Chapter 14. Retention and Transfer of Pollution by Hydrocarbons: Mechanisms
and Numerical Modeling 393
Bernhard SCHREFLER and Pierre DELAGE
14.1. Introduction 393
14.2. Mechanisms 393
14.3. Numerical modeling 398
14.4. Conclusion 415
14.5. Bibliography 416
Chapter 15. Methods of Soil Environmental Remediation 419
Abdelmalek BOUAZZA, Michel WOJNAROWICZ and Mario MANASSERO
15.1. Introduction 419
15.2. Pollution control techniques 420
15.3. Active containment in situ 423
15.4. Passive treatment in situ 425
15.5. Active treatment in situ 429
15.6. Conclusions 453
15.7. Bibliography 454
Chapter 16. Liners for Waste Containment Facilities 459
Abdelmalek BOUAZZA, Michel WOJNAROWICZ and Mario MANASSERO
16.1. Introduction 459
16.2. Types of lining systems and definition of basic components 462
16.3. Mass balance of the contaminants 464
16.4. Functions, performance and modeling 465
16.5. Environmental impact evaluation (risk analysis) 466
16.6. Bottom barriers 469
16.7. Equivalence of liner systems 481
16.8. Composite liners 491
16.9. Conclusions 501
16.10. Bibliography 502
List of Authors 509
Index 513