The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2017 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology;…mehr
The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2017 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.
Kiran N. Solanki is an associate professor of mechanical engineering in the School for Engineering of Matter, Transport & Energy (SEMTE) at Arizona State University (ASU). Prior to coming to ASU, he was an associate director for the Center for Advanced Vehicular Systems at Mississippi State University (MSU). Dr. Solanki received his Ph.D. from MSU in December 2008. Dr. Solanki's research interest is at the interface of solid mechanics and material science, with a focus on characterizing and developing microstructure-based structure-property relationships across multiple length and time scales. To date, he has coauthored more than 60 journal articles, four book chapters, and more than 35 conference proceedings with faculty and students at ASU and MSU. In addition, his paper published in Engineering Fracture Mechanics was recognized as one of the most highly cited papers from years 2002 to 2005. For his efforts to promote the education of engineering students in the area of fatigue technology, he was awarded the Society of Automotive Engineers (SAE) Henry O. Fuch Award by the SAE Fatigue Design & Evaluation Committee. In 2011, Dr. Solanki received The Minerals, Metals & Materials Society's (TMS) Light Metals Magnesium Best Fundamental Research Paper Award for his work on predicting deformation and failure behavior in magnesium alloys using a multiscale modeling approach. He received the 2013 TMS Light Metals Division Young Leader Professional Development Award; the 2013 Air Force Office of Scientific Research Young Investigator Research Award; the 2013 American Society of Mechanical Engineers (ASME) Orr Award for Early Career Excellence in Fatigue, Fracture, and Creep; and the 2016 Science Award from ECI/ONR. Co-Editors Dmytro Orlov, Ph.D., is Professor and Head of the Division of Materials Engineering at the Faculty of Engineering (LTH) in Lund University, Lund, Sweden. Among other professional activities, at present he hasa joint appointment as a senior scientist at the University of Nova Gorica in Slovenia and serves as a Vice Chair of the Magnesium Committee of The Minerals, Metals & Materials Society (TMS). Dr. Orlov obtained all graduate degrees at Donetsk National Technical University in Ukraine. During his Ph.D. studies he joined a research institute within National Academy of Sciences-Ukraine where he spent ten years, and then almost ten years on postdoctoral and senior research positions in world-renowned laboratories at Osaka, Kyoto, and Ritumeikan Universities in Japan, Monash University in Australia, and University of Nova Gorica in Slovenia. In the latter university he also received habilitation. To date, his track record includes more than 20 research projects, seven patents, more than 70 research papers and books, and approximately as many lectures at international meetings among which more than 20 were invited. Dr. Orlov's background is in the engineering of thermo-mechanical processing technologies for metallic materials fabrication with a core expertise in the design of deformation processing based techniques. The primary scope of his laboratory within LTH is the engineering of novel hybrid, composite and mono-materials with hierarchical structures architectured from atomic- through to macro-scales. His present research interests and ongoing research projects are focused on the design of Mg alloys for biomedical and lightweight mobility applications, multi-scale architectured structures with topological control of their heterogeneity, and the development of relevant in-situ characterization techniques at large-scale facilities. Alok Singh is a chief researcher in the Structural Materials Unit of National Institute for Materials Science in Tsukuba, Japan. He studied metallurgical engineering at undergraduate, masters, and doctoral levels. His Ph.D. work at the Indian Institute of Science was on the study of quasicrystalline andrelated intermetallic phases in aluminum alloys by transmission electron microscopy (TEM). He tackled the complex structures and reciprocal space of quasicrystals and its indexing problems. After working for several years studying advanced materials by TEM at the Indira Gandhi Center for Atomic Research, and visited National Research Institute for Metals in Japan, he moved to his present working place National Institute for Materials Science in 2002, and started working on magnesium alloys with special emphasis on Mg-Zn-RE alloys containing stable quasicrystal phase. His work has demonstrated very high strength with ductility in these alloys. These high mechanical properties have been analyzed with respect to microstructural characteristics. He has employed TEM to study dislocations, grain boundaries and twins, and interactions among these, to understand deformation behavior of magnesium alloys. Recently, he is applying advanced TEM techniques of scanning transmission electron microscopy (STEM) to study severely plastically deformed (SPD, a current trend in materials to achieve nano-scale microstructures) magnesium alloys, which is a challenge for the conventional TEM because of the strong contrast from high amount of mechanical strain. He has more than 90 refereed publications, more than 30 contributions to proceedings, and several patents on magnesium alloys. As a member of The Minerals, Metals & Materials Societ (TMS), he is a regular attendee of TMS annual meetings and has been involved with the Magnesium Committee for many years. He has been JOM representative and Vice Chair of the Magnesium Committee. He received the TMS Magnesium Fundamental Research Award for year 2009 along with his coworkers. Neale R. Neelameggham is 'The Guru' at IND LLC, involved in international consulting in the field of metals and associated chemicals (boron, magnesium, titanium, and lithium and rare earth elements), thiometallurgy, energy technologies, soil biochemical reactor design, etc. He was a visiting expert at Beihang University of Aeronautics and Astronautics, Beijing, China. He was a plenary speaker at the Light Metal Symposium in South Africa - on low carbon dioxide emission processes for magnesium. Dr. Neelameggham has more than 38 years of expertise in magnesium production and was involved in process development of its startup company NL Magnesium through to the present US Magnesium LLC, UT until 2011. Neelameggham and Brian Davis authored the ICE-JNME award winning (2016) paper-"21st Century Global Anthropogenic Warming Convective Model"-which notes that constrained air mass warming is independent of the energy conversion source - fossil or renewable energy. He is presently developing Agricoal(TM) and agricoalture to improve arid soils. Dr. Neelameggham holds 16 patents and patent applications, and has published several technical papers. He has served on the Magnesium Committee ofthe Light Metals Division (LMD) of TMS since its inception in 2000, chaired it in 2005, and in 2007 he was made a permanent co-organizer for the Magnesium Symposium. He has been a member of the Reactive Metals Committee, Recycling Committee, and Titanium Committee, and has been the Programming Committee Representative of LMD and LMD Council. Dr. Neelameggham was the inaugural chair, when in 2008, LMD and EPD (Extraction & Processing Division) created the Energy Committee, and has been a co-editor of the energy technology symposium proceedings through the present. He received the LMD Distinguished Service Award in 2010. While he was the chair of the Hydro and Electrometallurgy Committee he initiated the rare metal technology symposium in 2014. He is co-editor of the 2017 proceedings for the symposia on magnesium technology, energy technology, rare metal technology and solar cell silicon. Wim H. Sillekens is a project manager in the Strategic & Emerging Technologies Team at the research and technology center of the European Space Agency (ESA-ESTEC), where he is currently acting as the coordinator of the European Community research project ExoMet. He obtained his Ph.D. from Eindhoven University of Technology, Netherlands, on a subject relating to metal-forming technology. Since he has been engaged in aluminum and magnesium research, amongst others on (hydro-mechanical) forming, recycling/refining, (hydrostatic) extrusion, forging, magnesium-based biodegradable implants, and as of late on light-metal matrix nanocomposites and grain-refined materials. His professional career includes positions as a post-doc researcher at his alma mater and as a research scientist / project leader at the Netherlands Organization for Applied Scientific Research (TNO). International working experience includes a placement as a research fellow at MEL (now AIST) in Tsukuba, Japan. He has (co)-authored a variety of publications (about 150 entries to date). Other professional activities include an involvement in association activities (amongst others, as the lead organizer of TMS Magnesium Technology 2011), international conference committees, and as a peer reviewer of research papers and proposals. Research interests are in physical and mechanical metallurgy in general and in light-metals technology in particular.
Inhaltsangabe
Part 1. Magnesium Technology 2018.- Magnesium Alloys: Challenges and Achievements in Controlling Performance, and Future Application Perspectives.- Solute/Stacking Fault Energies in Mg and Implications for Ductility.- Recent Developments in Magnesium Alloy Corrosion Research.- Towards Active Corrosion Protection of Mg Alloys Using Corrosion Inhibition Approaches.- Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 1: MWNTs Content in Coating.- Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 2: Tribological Behavior and MWNTs Content in Coating.- Adding Dimensions to the Immersion Testing of Magnesium Corrosion.- Effect of Fluoride Ion on the Microstructure and Properties of Permanganate Conversion Coating on AZ91D Magnesium Alloy.- Corrosion Characteristics of Two RE Containing Magnesium Alloys.- Surface and interfacial energies of Mg17Al12-Mg system.- Effect of Ca on the Microstructure and Mechanical Properties in Mg Alloys.- Investigationof Grain Refinement Method for AZ91 Alloy using Carbide Inoculation.- Experimental Study of the Solidification Microstructure in the Mg-rich Corner of Mg-Al-Ce System.- Material Design for Enhancing Toughness of Mg Alloy and Application for Biodegradable Devices.- Influences of Yttrium Content on Microstructure and Mechanical Properties of As-cast Mg-Ca-Y-Zr Alloys.- Strengthening and Toughening Behaviors of the Mg-9Al Alloy Containing Oxygen Atoms.- Investigations on Microstructure and Mechanical Properties of Non-flammable Mg-Al-Zn-Ca-Y Alloys.- Developmentof BioMg 250 Bioabsorbable Implant Alloy.- The Electrolytic Production of Magnesium from MgO.- Empirical Examination of the Formation of Mechanical Properties of Heated Twin-roll-cast Magnesium Strips.- The Morphology and Distribution of Al8Mn5 in High Pressure Die Cast AM50 and AZ91.- Study on the Production of Metallic Magnesium from Nickel - Containing Serpentine.- Fabrication of Mg(OH)2 by Electrolysis Using MgCl2 Aqueous Solution.- An Experimental Study on Penetration Resistance Characteristics of Full Production Scale Magnesium Alloy AMX602.- Experimental Study on the Reversion Reaction between Magnesium and CO Vapor in the Carbothermic Reduction of Magnesia under Vacuum.- Study on Metal Smelting Process under Microwave Irradiation.- Thermogravimetric Analysis of Simultaneous Decomposition and Formation of MgB2.- Dislocations in Mg Alloys with Rare-earth Element Addition.- Microstructure, Mechanical Properties and Deformation Behavior of Mg-Gd-Y-Zn-Zr Alloy.- Twin-slip Interaction at Low Stress Stage Deformation in an AZ31 Mg Alloy.- In-situ Neutron Diffraction and Acoustic Emission during the Biaxial Loading of AZ31 Alloy.- Acoustic Emission Study of High Temperature Deformation of Mg-Zn-Y Alloys with LPSO Phase.- Deformation and Recrystallization Mechanisms and their Influence on the Microstructure Development of Rare Earth Containing Magnesium Sheets.- Thermo-mechanical Treatment of Extruded Mg-1Zn Alloy: Cluster Analysis of AE Signals.- The effect of initial texture on deformation behaviors of Mg alloys under Erichsen test.- Measurement of Twin Formation Energy Barriers Using Nudged Elastic Band Molecular Statics.- Microstructure and Mechanical Properties of Mg-7.71Gd-2.39Nd-0.17Zr Alloy after the Different Heat Treatments.- Superplasticity in a Chip-consolidated Mg97Zn1Y2 Alloy with LPSO Phase.- Technological Solutions to Apply Magnesium Bulk Materials in Dynamic Bending and Axial Compression Load Cases.- Mechanical Properties of Thermo-mechanically Treated Extruded Mg-Zn-based Alloys.- Influence of Low Temperature Forging on Microstructure and Low Cycle Fatigue Behavior of Cast AZ31B Mg Alloy.- The Recrystallization and Grain Growth Behavior of Unalloyed Mg and a Mg-Al Alloy.- Strengthening of a Biodegradable Mg-Zn-Ca Alloy ZX50 after Processing by HPT and Heat Treatment.- Strain Heterogeneity Structures in Wrought Magnesium AZ31 under Reversed Loading.- Hot Forging Behavior of Mg-8Al-4Ba-4Ca (ABaX844) Alloy and Validation of Processing Map.- Effect of Calcium on Resistance to Oxidation of Magnesium Alloys (AZ91).- Evolution of Microstructure and Mechanical Properties during the Casting and Rolling of the ZEK100 Sheet.- Part 2. Magnesium Alloy Development: An LMD Symposium in Honor of Karl Kainer.- Recent Developments in the Application of the Interdependence Model of Grain Formation and Refinement.- Thermodynamics of Phase Formation in Mg-Al-C Alloys Applied to Grain Refinement.- Development of Magnesium-Rare Earth Die-casting Alloys.- Creep Resistant Mg-Mn Based Alloys for Automotive Powertrain Applications.- Solutions for Next Generation Automotive Lightweight Concepts Based on Material Selection and Functional Integration.- Magnesium Pistons in Engines: Fiction or Fact?.- Development of Magnesium Sheets.- Development of Heat-treatable High-strength Mg-Zn-Ca-Zr Sheet Alloy with Excellent Room Temperature Formability.-Interaction between Propagating Twins and Non-shearable Precipitates in Magnesium Alloys.- Effects of Severe Plastic Deformation on Mechanical Properties and Corrosion Behavior of Magnesium Alloys.- Alloy Design for the Development Heat Treatable Mg Sheet Alloy with Excellent Room Temperature Formability and Strength.- Co-precipitation on the Basal and Prismatic Planes in Mg-Gd-Ag-Zr Alloy Subjected to Over-ageing.- Evolution of the Dislocation Structure during Compression in a Mg-Zn-Y Alloy with Long Period Stacking Ordered Structure.- Intermetallic Phase Characteristics in the Mg-Nd-Zn System.- Biodegradable Mg-Y and Mg-Li Alloys with the Addition of Ca and Zn to the Medical Application.- Degradable Magnesium Implants - Assessment of the Current Situation.- Study on Mg-Si-Sr Ternary Alloys for Biomedical Applications.- Solidification Analysis of Grain Refined AZ91D Magnesium Alloy via Neutron Diffraction.- Microstructure Evolution and Mechanical Properties of Thin Strip Twin Roll Cast (TRC) Mg Sheet.- Part 3. Environmental Challenges and Opportunities for the Magnesium Industry: Recycling and Sustainability Joint Session.- Repaired Algorithm for Nonlinear to Predict the Displacement of Copper Ion in the Absorbtion Systerm of Treated Steel Slag.
Part 1. Magnesium Technology 2018.- Magnesium Alloys: Challenges and Achievements in Controlling Performance, and Future Application Perspectives.- Solute/Stacking Fault Energies in Mg and Implications for Ductility.- Recent Developments in Magnesium Alloy Corrosion Research.- Towards Active Corrosion Protection of Mg Alloys Using Corrosion Inhibition Approaches.- Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 1: MWNTs Content in Coating.- Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 2: Tribological Behavior and MWNTs Content in Coating.- Adding Dimensions to the Immersion Testing of Magnesium Corrosion.- Effect of Fluoride Ion on the Microstructure and Properties of Permanganate Conversion Coating on AZ91D Magnesium Alloy.- Corrosion Characteristics of Two RE Containing Magnesium Alloys.- Surface and interfacial energies of Mg17Al12-Mg system.- Effect of Ca on the Microstructure and Mechanical Properties in Mg Alloys.- Investigationof Grain Refinement Method for AZ91 Alloy using Carbide Inoculation.- Experimental Study of the Solidification Microstructure in the Mg-rich Corner of Mg-Al-Ce System.- Material Design for Enhancing Toughness of Mg Alloy and Application for Biodegradable Devices.- Influences of Yttrium Content on Microstructure and Mechanical Properties of As-cast Mg-Ca-Y-Zr Alloys.- Strengthening and Toughening Behaviors of the Mg-9Al Alloy Containing Oxygen Atoms.- Investigations on Microstructure and Mechanical Properties of Non-flammable Mg-Al-Zn-Ca-Y Alloys.- Developmentof BioMg 250 Bioabsorbable Implant Alloy.- The Electrolytic Production of Magnesium from MgO.- Empirical Examination of the Formation of Mechanical Properties of Heated Twin-roll-cast Magnesium Strips.- The Morphology and Distribution of Al8Mn5 in High Pressure Die Cast AM50 and AZ91.- Study on the Production of Metallic Magnesium from Nickel - Containing Serpentine.- Fabrication of Mg(OH)2 by Electrolysis Using MgCl2 Aqueous Solution.- An Experimental Study on Penetration Resistance Characteristics of Full Production Scale Magnesium Alloy AMX602.- Experimental Study on the Reversion Reaction between Magnesium and CO Vapor in the Carbothermic Reduction of Magnesia under Vacuum.- Study on Metal Smelting Process under Microwave Irradiation.- Thermogravimetric Analysis of Simultaneous Decomposition and Formation of MgB2.- Dislocations in Mg Alloys with Rare-earth Element Addition.- Microstructure, Mechanical Properties and Deformation Behavior of Mg-Gd-Y-Zn-Zr Alloy.- Twin-slip Interaction at Low Stress Stage Deformation in an AZ31 Mg Alloy.- In-situ Neutron Diffraction and Acoustic Emission during the Biaxial Loading of AZ31 Alloy.- Acoustic Emission Study of High Temperature Deformation of Mg-Zn-Y Alloys with LPSO Phase.- Deformation and Recrystallization Mechanisms and their Influence on the Microstructure Development of Rare Earth Containing Magnesium Sheets.- Thermo-mechanical Treatment of Extruded Mg-1Zn Alloy: Cluster Analysis of AE Signals.- The effect of initial texture on deformation behaviors of Mg alloys under Erichsen test.- Measurement of Twin Formation Energy Barriers Using Nudged Elastic Band Molecular Statics.- Microstructure and Mechanical Properties of Mg-7.71Gd-2.39Nd-0.17Zr Alloy after the Different Heat Treatments.- Superplasticity in a Chip-consolidated Mg97Zn1Y2 Alloy with LPSO Phase.- Technological Solutions to Apply Magnesium Bulk Materials in Dynamic Bending and Axial Compression Load Cases.- Mechanical Properties of Thermo-mechanically Treated Extruded Mg-Zn-based Alloys.- Influence of Low Temperature Forging on Microstructure and Low Cycle Fatigue Behavior of Cast AZ31B Mg Alloy.- The Recrystallization and Grain Growth Behavior of Unalloyed Mg and a Mg-Al Alloy.- Strengthening of a Biodegradable Mg-Zn-Ca Alloy ZX50 after Processing by HPT and Heat Treatment.- Strain Heterogeneity Structures in Wrought Magnesium AZ31 under Reversed Loading.- Hot Forging Behavior of Mg-8Al-4Ba-4Ca (ABaX844) Alloy and Validation of Processing Map.- Effect of Calcium on Resistance to Oxidation of Magnesium Alloys (AZ91).- Evolution of Microstructure and Mechanical Properties during the Casting and Rolling of the ZEK100 Sheet.- Part 2. Magnesium Alloy Development: An LMD Symposium in Honor of Karl Kainer.- Recent Developments in the Application of the Interdependence Model of Grain Formation and Refinement.- Thermodynamics of Phase Formation in Mg-Al-C Alloys Applied to Grain Refinement.- Development of Magnesium-Rare Earth Die-casting Alloys.- Creep Resistant Mg-Mn Based Alloys for Automotive Powertrain Applications.- Solutions for Next Generation Automotive Lightweight Concepts Based on Material Selection and Functional Integration.- Magnesium Pistons in Engines: Fiction or Fact?.- Development of Magnesium Sheets.- Development of Heat-treatable High-strength Mg-Zn-Ca-Zr Sheet Alloy with Excellent Room Temperature Formability.-Interaction between Propagating Twins and Non-shearable Precipitates in Magnesium Alloys.- Effects of Severe Plastic Deformation on Mechanical Properties and Corrosion Behavior of Magnesium Alloys.- Alloy Design for the Development Heat Treatable Mg Sheet Alloy with Excellent Room Temperature Formability and Strength.- Co-precipitation on the Basal and Prismatic Planes in Mg-Gd-Ag-Zr Alloy Subjected to Over-ageing.- Evolution of the Dislocation Structure during Compression in a Mg-Zn-Y Alloy with Long Period Stacking Ordered Structure.- Intermetallic Phase Characteristics in the Mg-Nd-Zn System.- Biodegradable Mg-Y and Mg-Li Alloys with the Addition of Ca and Zn to the Medical Application.- Degradable Magnesium Implants - Assessment of the Current Situation.- Study on Mg-Si-Sr Ternary Alloys for Biomedical Applications.- Solidification Analysis of Grain Refined AZ91D Magnesium Alloy via Neutron Diffraction.- Microstructure Evolution and Mechanical Properties of Thin Strip Twin Roll Cast (TRC) Mg Sheet.- Part 3. Environmental Challenges and Opportunities for the Magnesium Industry: Recycling and Sustainability Joint Session.- Repaired Algorithm for Nonlinear to Predict the Displacement of Copper Ion in the Absorbtion Systerm of Treated Steel Slag.
Es gelten unsere Allgemeinen Geschäftsbedingungen: www.buecher.de/agb
Impressum
www.buecher.de ist ein Internetauftritt der buecher.de internetstores GmbH
Geschäftsführung: Monica Sawhney | Roland Kölbl | Günter Hilger
Sitz der Gesellschaft: Batheyer Straße 115 - 117, 58099 Hagen
Postanschrift: Bürgermeister-Wegele-Str. 12, 86167 Augsburg
Amtsgericht Hagen HRB 13257
Steuernummer: 321/5800/1497
USt-IdNr: DE450055826