Mechanical Properties and Performance of Engineering Ceramics and Composites VIII, Volume 34, Issue 2
Herausgeber: Singh, Dileep; Salem, Jonathan
Mechanical Properties and Performance of Engineering Ceramics and Composites VIII, Volume 34, Issue 2
Herausgeber: Singh, Dileep; Salem, Jonathan
- Gebundenes Buch
- Merkliste
- Auf die Merkliste
- Bewerten Bewerten
- Teilen
- Produkt teilen
- Produkterinnerung
- Produkterinnerung
Ceramic Engineering and Science Proceedings Volume 34, Issue 2 - Mechanical Properties and Performance of Engineering Ceramics and Composites VIII A collection of 21 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in Symposium 1 - Mechanical Behavior and Performance of Ceramics and Composites.
Andere Kunden interessierten sich auch für
- Mechanical Properties and Performance of Engineering Ceramics and Composites IV, Volume 30, Issue 2133,99 €
- Mechanical Properties and Performance of Engineering Ceramics and Composites IV, Volume 29, Issue 2123,99 €
- Mechanical Properties and Performance of Engineering Ceramics and Composites VII, Volume 33, Issue 2106,99 €
- Ceramic Materials for Energy Applications III, Volume 34, Issue 9102,99 €
- Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII, Volume 34, Issue 8104,99 €
- Advances in Solid Oxide Fuel Cells IX, Volume 34, Issue 4104,99 €
- Developments in Strategic Materials and Computational Design IV, Volume 34, Issue 10104,99 €
-
-
-
Ceramic Engineering and Science Proceedings Volume 34, Issue 2 - Mechanical Properties and Performance of Engineering Ceramics and Composites VIII A collection of 21 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in Symposium 1 - Mechanical Behavior and Performance of Ceramics and Composites.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Produktdetails
- Produktdetails
- Verlag: Wiley
- Volume 34 edition
- Seitenzahl: 224
- Erscheinungstermin: 4. November 2013
- Englisch
- Abmessung: 240mm x 161mm x 17mm
- Gewicht: 507g
- ISBN-13: 9781118807477
- ISBN-10: 1118807472
- Artikelnr.: 39177810
- Verlag: Wiley
- Volume 34 edition
- Seitenzahl: 224
- Erscheinungstermin: 4. November 2013
- Englisch
- Abmessung: 240mm x 161mm x 17mm
- Gewicht: 507g
- ISBN-13: 9781118807477
- ISBN-10: 1118807472
- Artikelnr.: 39177810
Preface ix
Introduction xi
CHARACTERIZATION AND MODELING OF CERAMIC MATRIX COMPOSITES
Acoustic Emission and Electrical Resistivity Monitoring of SiC/SiC
Composite Cyclic Behavior 3
Christopher R. Baker and Gregory N. Morscher
Characterization of SiC/SiCN Ceramic Matrix Composites with Monazite Fiber
Coating 11
Enrico Klatt, Klemens Kelm, Martin FrieG, Dietmar Koch, and Heinz
Voggenreiter
Fiber, Porosity and Weave Effects on Properties of Ceramic Matrix
Composites 23
G. Ojard, J. Cuneo, I. Smyth, E. Prevost, Y. Gowayed, U. Santhosh, and A.
Calomino
Weave and Fiber Volume Effects on Durability of Ceramic Matrix Composites
33
G. Ojard, E. Prevost, U. Santhosh, R. Naik, and D. C. Jarmon
Cooling Performance Tests of a CMC Nozzle with Annular Sector Cascade Rig
45
Kozo Nita, Yoji Okita, and Chiyuki Nakamata
Study on Strength Prediction Model for Unidirectional Composites 57
Hongjian Zhang, Weidong Wen, Haitao Cui, Hui Yuan, and Jianfeng Xiao
PROCESSING AND PROPERTIES OF FIBERS AND CERAMICS
The Effect of the Addition of Ceria Stabilized Zirconia on the Creep of
Mullite 69
D. Glymond, M. Vick, M.-J. Pan, F. Giuliani, and L. J. Vandeperre
Microstructural Evolution of CVD Amorphous B-C Ceramics Heat Treated:
Experimental Characterization and Atomistic Simulation 79
Camille Pallier, Georges Chollon, Patrick Weisbecker, Jean-Marc Leyssale,
and F. Teyssandier
Densification of SiC with AIN-Nd203 Sintering Additives 89
Laner Wu, Yong Jiang, Wenzhou Sun, Yuhong Chen, and Zhenkun Huang
Solid-Solution of Nitrogen-Containing Rare Earth Aluminates R2AI03N (R=Nd
and Sm) 95
Yong Jiang, Laner Wu, and Zhengkun Huang
Microstructure and Properties of Reaction Bonded Metal Modified Ceramics
101
S. M. Salamone, M. K. Aghajanian, S. E. Horner, and J. Q. Zheng
Investigation into the Effect of Common Ceramic Core Additives on the
Crystallisation and Sintering of Amorphous Silica 111
Ben Taylor, Stewart T. Welch, and Stuart Blackburn
Different Fibers Exposed to Temperatures Up to 1000° C 123
Henry A. Colorado, Clem Hiel, and Jenn-Ming Yang
Heat Diffusivity Measurements on Ceramic Foams and Fibers with a Laser Spot
and an IR Camera 137
G. L. Vignoles, C. Lorrette, G. Bresson, and R. Backov
Towards a Multiscale Model of Thermally-Induced Microcracking in Porous
Ceramics 145
Ray S. Fertig, III and Seth Nickerson
Investigation on Reliability of High Alumina Refractories 155
Wenjie Yuan, Qingyou Zhu, Jun Li, Chengji Deng, and Hongxi Zhu
Evaluation of Subcritical Crack Growth in Low Temperature Co-Fired Ceramics
161
Raul Bermejo, Peter Supancic, Clemens Krautgasser, and Robert Danzer
Multilayer Ceramic Composite Armor Design and Impact Tests 173
Faruk Elaldi
Compression Failure Analysis of Graphite Foam Core Based Sandwich Composite
Constructions 179
Hooman Hosseini, Seyyed Reza Ghaffarian, Mohammad Teymouri, and Ali Reza
Moeini
Tribological Profile of Binderless Niobium Carbide 189
Mathias Woydt and Hardy Mohrbacher
Tribological Properties of Alumina/Zirconia Composites with and without
h-BN Phases 195
Liang Xue and Gary L. Doll
Author Index 207
Introduction xi
CHARACTERIZATION AND MODELING OF CERAMIC MATRIX COMPOSITES
Acoustic Emission and Electrical Resistivity Monitoring of SiC/SiC
Composite Cyclic Behavior 3
Christopher R. Baker and Gregory N. Morscher
Characterization of SiC/SiCN Ceramic Matrix Composites with Monazite Fiber
Coating 11
Enrico Klatt, Klemens Kelm, Martin FrieG, Dietmar Koch, and Heinz
Voggenreiter
Fiber, Porosity and Weave Effects on Properties of Ceramic Matrix
Composites 23
G. Ojard, J. Cuneo, I. Smyth, E. Prevost, Y. Gowayed, U. Santhosh, and A.
Calomino
Weave and Fiber Volume Effects on Durability of Ceramic Matrix Composites
33
G. Ojard, E. Prevost, U. Santhosh, R. Naik, and D. C. Jarmon
Cooling Performance Tests of a CMC Nozzle with Annular Sector Cascade Rig
45
Kozo Nita, Yoji Okita, and Chiyuki Nakamata
Study on Strength Prediction Model for Unidirectional Composites 57
Hongjian Zhang, Weidong Wen, Haitao Cui, Hui Yuan, and Jianfeng Xiao
PROCESSING AND PROPERTIES OF FIBERS AND CERAMICS
The Effect of the Addition of Ceria Stabilized Zirconia on the Creep of
Mullite 69
D. Glymond, M. Vick, M.-J. Pan, F. Giuliani, and L. J. Vandeperre
Microstructural Evolution of CVD Amorphous B-C Ceramics Heat Treated:
Experimental Characterization and Atomistic Simulation 79
Camille Pallier, Georges Chollon, Patrick Weisbecker, Jean-Marc Leyssale,
and F. Teyssandier
Densification of SiC with AIN-Nd203 Sintering Additives 89
Laner Wu, Yong Jiang, Wenzhou Sun, Yuhong Chen, and Zhenkun Huang
Solid-Solution of Nitrogen-Containing Rare Earth Aluminates R2AI03N (R=Nd
and Sm) 95
Yong Jiang, Laner Wu, and Zhengkun Huang
Microstructure and Properties of Reaction Bonded Metal Modified Ceramics
101
S. M. Salamone, M. K. Aghajanian, S. E. Horner, and J. Q. Zheng
Investigation into the Effect of Common Ceramic Core Additives on the
Crystallisation and Sintering of Amorphous Silica 111
Ben Taylor, Stewart T. Welch, and Stuart Blackburn
Different Fibers Exposed to Temperatures Up to 1000° C 123
Henry A. Colorado, Clem Hiel, and Jenn-Ming Yang
Heat Diffusivity Measurements on Ceramic Foams and Fibers with a Laser Spot
and an IR Camera 137
G. L. Vignoles, C. Lorrette, G. Bresson, and R. Backov
Towards a Multiscale Model of Thermally-Induced Microcracking in Porous
Ceramics 145
Ray S. Fertig, III and Seth Nickerson
Investigation on Reliability of High Alumina Refractories 155
Wenjie Yuan, Qingyou Zhu, Jun Li, Chengji Deng, and Hongxi Zhu
Evaluation of Subcritical Crack Growth in Low Temperature Co-Fired Ceramics
161
Raul Bermejo, Peter Supancic, Clemens Krautgasser, and Robert Danzer
Multilayer Ceramic Composite Armor Design and Impact Tests 173
Faruk Elaldi
Compression Failure Analysis of Graphite Foam Core Based Sandwich Composite
Constructions 179
Hooman Hosseini, Seyyed Reza Ghaffarian, Mohammad Teymouri, and Ali Reza
Moeini
Tribological Profile of Binderless Niobium Carbide 189
Mathias Woydt and Hardy Mohrbacher
Tribological Properties of Alumina/Zirconia Composites with and without
h-BN Phases 195
Liang Xue and Gary L. Doll
Author Index 207
Preface ix
Introduction xi
CHARACTERIZATION AND MODELING OF CERAMIC MATRIX COMPOSITES
Acoustic Emission and Electrical Resistivity Monitoring of SiC/SiC
Composite Cyclic Behavior 3
Christopher R. Baker and Gregory N. Morscher
Characterization of SiC/SiCN Ceramic Matrix Composites with Monazite Fiber
Coating 11
Enrico Klatt, Klemens Kelm, Martin FrieG, Dietmar Koch, and Heinz
Voggenreiter
Fiber, Porosity and Weave Effects on Properties of Ceramic Matrix
Composites 23
G. Ojard, J. Cuneo, I. Smyth, E. Prevost, Y. Gowayed, U. Santhosh, and A.
Calomino
Weave and Fiber Volume Effects on Durability of Ceramic Matrix Composites
33
G. Ojard, E. Prevost, U. Santhosh, R. Naik, and D. C. Jarmon
Cooling Performance Tests of a CMC Nozzle with Annular Sector Cascade Rig
45
Kozo Nita, Yoji Okita, and Chiyuki Nakamata
Study on Strength Prediction Model for Unidirectional Composites 57
Hongjian Zhang, Weidong Wen, Haitao Cui, Hui Yuan, and Jianfeng Xiao
PROCESSING AND PROPERTIES OF FIBERS AND CERAMICS
The Effect of the Addition of Ceria Stabilized Zirconia on the Creep of
Mullite 69
D. Glymond, M. Vick, M.-J. Pan, F. Giuliani, and L. J. Vandeperre
Microstructural Evolution of CVD Amorphous B-C Ceramics Heat Treated:
Experimental Characterization and Atomistic Simulation 79
Camille Pallier, Georges Chollon, Patrick Weisbecker, Jean-Marc Leyssale,
and F. Teyssandier
Densification of SiC with AIN-Nd203 Sintering Additives 89
Laner Wu, Yong Jiang, Wenzhou Sun, Yuhong Chen, and Zhenkun Huang
Solid-Solution of Nitrogen-Containing Rare Earth Aluminates R2AI03N (R=Nd
and Sm) 95
Yong Jiang, Laner Wu, and Zhengkun Huang
Microstructure and Properties of Reaction Bonded Metal Modified Ceramics
101
S. M. Salamone, M. K. Aghajanian, S. E. Horner, and J. Q. Zheng
Investigation into the Effect of Common Ceramic Core Additives on the
Crystallisation and Sintering of Amorphous Silica 111
Ben Taylor, Stewart T. Welch, and Stuart Blackburn
Different Fibers Exposed to Temperatures Up to 1000° C 123
Henry A. Colorado, Clem Hiel, and Jenn-Ming Yang
Heat Diffusivity Measurements on Ceramic Foams and Fibers with a Laser Spot
and an IR Camera 137
G. L. Vignoles, C. Lorrette, G. Bresson, and R. Backov
Towards a Multiscale Model of Thermally-Induced Microcracking in Porous
Ceramics 145
Ray S. Fertig, III and Seth Nickerson
Investigation on Reliability of High Alumina Refractories 155
Wenjie Yuan, Qingyou Zhu, Jun Li, Chengji Deng, and Hongxi Zhu
Evaluation of Subcritical Crack Growth in Low Temperature Co-Fired Ceramics
161
Raul Bermejo, Peter Supancic, Clemens Krautgasser, and Robert Danzer
Multilayer Ceramic Composite Armor Design and Impact Tests 173
Faruk Elaldi
Compression Failure Analysis of Graphite Foam Core Based Sandwich Composite
Constructions 179
Hooman Hosseini, Seyyed Reza Ghaffarian, Mohammad Teymouri, and Ali Reza
Moeini
Tribological Profile of Binderless Niobium Carbide 189
Mathias Woydt and Hardy Mohrbacher
Tribological Properties of Alumina/Zirconia Composites with and without
h-BN Phases 195
Liang Xue and Gary L. Doll
Author Index 207
Introduction xi
CHARACTERIZATION AND MODELING OF CERAMIC MATRIX COMPOSITES
Acoustic Emission and Electrical Resistivity Monitoring of SiC/SiC
Composite Cyclic Behavior 3
Christopher R. Baker and Gregory N. Morscher
Characterization of SiC/SiCN Ceramic Matrix Composites with Monazite Fiber
Coating 11
Enrico Klatt, Klemens Kelm, Martin FrieG, Dietmar Koch, and Heinz
Voggenreiter
Fiber, Porosity and Weave Effects on Properties of Ceramic Matrix
Composites 23
G. Ojard, J. Cuneo, I. Smyth, E. Prevost, Y. Gowayed, U. Santhosh, and A.
Calomino
Weave and Fiber Volume Effects on Durability of Ceramic Matrix Composites
33
G. Ojard, E. Prevost, U. Santhosh, R. Naik, and D. C. Jarmon
Cooling Performance Tests of a CMC Nozzle with Annular Sector Cascade Rig
45
Kozo Nita, Yoji Okita, and Chiyuki Nakamata
Study on Strength Prediction Model for Unidirectional Composites 57
Hongjian Zhang, Weidong Wen, Haitao Cui, Hui Yuan, and Jianfeng Xiao
PROCESSING AND PROPERTIES OF FIBERS AND CERAMICS
The Effect of the Addition of Ceria Stabilized Zirconia on the Creep of
Mullite 69
D. Glymond, M. Vick, M.-J. Pan, F. Giuliani, and L. J. Vandeperre
Microstructural Evolution of CVD Amorphous B-C Ceramics Heat Treated:
Experimental Characterization and Atomistic Simulation 79
Camille Pallier, Georges Chollon, Patrick Weisbecker, Jean-Marc Leyssale,
and F. Teyssandier
Densification of SiC with AIN-Nd203 Sintering Additives 89
Laner Wu, Yong Jiang, Wenzhou Sun, Yuhong Chen, and Zhenkun Huang
Solid-Solution of Nitrogen-Containing Rare Earth Aluminates R2AI03N (R=Nd
and Sm) 95
Yong Jiang, Laner Wu, and Zhengkun Huang
Microstructure and Properties of Reaction Bonded Metal Modified Ceramics
101
S. M. Salamone, M. K. Aghajanian, S. E. Horner, and J. Q. Zheng
Investigation into the Effect of Common Ceramic Core Additives on the
Crystallisation and Sintering of Amorphous Silica 111
Ben Taylor, Stewart T. Welch, and Stuart Blackburn
Different Fibers Exposed to Temperatures Up to 1000° C 123
Henry A. Colorado, Clem Hiel, and Jenn-Ming Yang
Heat Diffusivity Measurements on Ceramic Foams and Fibers with a Laser Spot
and an IR Camera 137
G. L. Vignoles, C. Lorrette, G. Bresson, and R. Backov
Towards a Multiscale Model of Thermally-Induced Microcracking in Porous
Ceramics 145
Ray S. Fertig, III and Seth Nickerson
Investigation on Reliability of High Alumina Refractories 155
Wenjie Yuan, Qingyou Zhu, Jun Li, Chengji Deng, and Hongxi Zhu
Evaluation of Subcritical Crack Growth in Low Temperature Co-Fired Ceramics
161
Raul Bermejo, Peter Supancic, Clemens Krautgasser, and Robert Danzer
Multilayer Ceramic Composite Armor Design and Impact Tests 173
Faruk Elaldi
Compression Failure Analysis of Graphite Foam Core Based Sandwich Composite
Constructions 179
Hooman Hosseini, Seyyed Reza Ghaffarian, Mohammad Teymouri, and Ali Reza
Moeini
Tribological Profile of Binderless Niobium Carbide 189
Mathias Woydt and Hardy Mohrbacher
Tribological Properties of Alumina/Zirconia Composites with and without
h-BN Phases 195
Liang Xue and Gary L. Doll
Author Index 207