New Developments and Advances in Robot Control
Herausgegeben:Derbel, Nabil; Ghommam, Jawhar; Zhu, Quanmin
New Developments and Advances in Robot Control
Herausgegeben:Derbel, Nabil; Ghommam, Jawhar; Zhu, Quanmin
- Gebundenes Buch
- Merkliste
- Auf die Merkliste
- Bewerten Bewerten
- Teilen
- Produkt teilen
- Produkterinnerung
- Produkterinnerung
This book highlights relevant studies and applications in the area of robotics, which reflect the latest research, from interdisciplinary theoretical studies and computational algorithm development, to representative applications. It presents chapters on advanced control, such as fuzzy, neural, backstepping, sliding mode, adaptive, predictive, diagnosis and fault tolerant control etc. and addresses topics including cloud robotics, cable-driven robots, two-wheeled robots, mobile robots, swarm robots, hybrid vehicle, and drones. Each chapter employs a uniform structure: background, motivation,…mehr
Andere Kunden interessierten sich auch für
- Applications of Sliding Mode Control110,99 €
- Qikun ShenDistributed Fault-Tolerant Consensus Control of Leader-Following Systems95,99 €
- Qikun ShenDistributed Fault-Tolerant Consensus Control of Leader-Following Systems95,99 €
- Damiano RotondoAdvances in Gain-Scheduling and Fault Tolerant Control Techniques74,99 €
- Yuanqing XiaFinite Time and Cooperative Control of Flight Vehicles110,99 €
- Yuanqing XiaFinite Time and Cooperative Control of Flight Vehicles110,99 €
- Wei HeActive Vibration Control and Stability Analysis of Flexible Beam Systems88,99 €
-
-
-
This book highlights relevant studies and applications in the area of robotics, which reflect the latest research, from interdisciplinary theoretical studies and computational algorithm development, to representative applications. It presents chapters on advanced control, such as fuzzy, neural, backstepping, sliding mode, adaptive, predictive, diagnosis and fault tolerant control etc. and addresses topics including cloud robotics, cable-driven robots, two-wheeled robots, mobile robots, swarm robots, hybrid vehicle, and drones. Each chapter employs a uniform structure: background, motivation, quantitative development (equations), case studies/illustration/tutorial (simulations, experiences, curves, tables, etc.), allowing readers to easily tailor the techniques to their own applications.
Produktdetails
- Produktdetails
- Studies in Systems, Decision and Control 175
- Verlag: Springer / Springer Nature Singapore / Springer, Berlin
- Artikelnr. des Verlages: 978-981-13-2211-2
- 1st ed. 2019
- Seitenzahl: 368
- Erscheinungstermin: 5. Februar 2019
- Englisch
- Abmessung: 241mm x 160mm x 26mm
- Gewicht: 700g
- ISBN-13: 9789811322112
- ISBN-10: 9811322112
- Artikelnr.: 53259617
- Herstellerkennzeichnung
- Books on Demand GmbH
- In de Tarpen 42
- 22848 Norderstedt
- info@bod.de
- 040 53433511
- Studies in Systems, Decision and Control 175
- Verlag: Springer / Springer Nature Singapore / Springer, Berlin
- Artikelnr. des Verlages: 978-981-13-2211-2
- 1st ed. 2019
- Seitenzahl: 368
- Erscheinungstermin: 5. Februar 2019
- Englisch
- Abmessung: 241mm x 160mm x 26mm
- Gewicht: 700g
- ISBN-13: 9789811322112
- ISBN-10: 9811322112
- Artikelnr.: 53259617
- Herstellerkennzeichnung
- Books on Demand GmbH
- In de Tarpen 42
- 22848 Norderstedt
- info@bod.de
- 040 53433511
Nabil Derbel is Professor in Control Systems Theory at the Electrical Engineering Department of The "National Engineering School of Sfax", University of Sfax, Tunisia. He received his engineering Diploma from the "Ecole Nationale d'Ingénieurs de Sfax" in 1986, the "Diplôme d'Etudes Approfondies" in Automatic control from the "Institut National des Sciences Appliquées de Toulouse" in 1986, the "Doctorat d'Université" degree from the "Laboratoire d'Automatique et d'Analyse des Systèmes de Toulouse" in 1989, and the "Doctorat d'Etat" degree from the" Ecole Nationale d'Ingénieurs de Tunis". His current interests include: Optimal Control, Sliding Mode Control, Complex Systems, Fuzzy Logic, Neural Networks. He is the author and the co-author of more than 80 papers published in international Journals and of more than 500 papers published in international conferences. Currently, Professor Derbel is associate editor of International Journal of Modelling, Identification and Control, the editor of International Journal of Digital Signals and Smart Systems, and co-editor (and co-founder) of Transactions on Systems, Signals & Devices, an International Journal, which has been renamed in 2017 as Advances in Systems, Signals & Devices. He has edited a book for Springer entitled "Applications of sliding mode control", in 2017. Jawhar Ghommam is an Associate Professor in Control Theory and Robotics at the National Institute of Applied Science and Technology, University of Carthage, Tunis. He's got the BSc degree in Computer and Control Engineering from the National Institute and Applied Sciences and Technology (INSAT) in 2003 in Tunis. He's got the DEA ( MSc) degree form the university of Montpelier at the Laboratoire d'Informatique, Robotique et Micro-électronique (LIRMM, France) in 2004 and later on in 2008 a Ph.D in Control Engineering degree jointly from the National Engineering School of Sfax and the university of Orleans in France. From September 2008 through September 2010 he had the privilege of regularly visiting a distinguished university at the Balearic Islands (Spain), where he served as a research contributor and Senior lecturer on cooperative control algorithms and a lecturer on time delayed systems. He also has the privilege of visiting the GREPCI research group on the basis of two months yearly since 2010. J. Ghommam occupies a permanent research position at the Control Energy Management Laboratory (CEM-Lab) at Sfax-Tunisia. His Research interests include fundamental motion control concepts for nonholonomic/underactuated vehicle systems, nonlinear and adaptive control; intelligent and autonomous control of networked unmanned systems, team cooperation, consensus achievement,and sensor networks. He is the author/coauthor of about 57 technical papers in international journals, and refereed conferences. He serves as a regular referee for many international journals in the led of Control and Robotics. Quanmin Zhu is Professor in control systems at Department of Engineering Design and Mathematics, University of the West of England, Bristol, UK. He obtained his MSc. in Harbin Institute of Technology, China in 1983 and PhD in Faculty of Engineering, University of Warwick, UK in 1989. His main research interest is in the area of nonlinear system modelling, identification, and control. He has published over 160 papers on these topics and provided consultancy to various industries. Currently Professor Zhu is acting as member of editorial board of International Journal of Systems Science, member of editorial board of Chinese Journal of Scientific Instrument, editor (and founder) of International Journal of Modelling, Identification and Control, and editor of International Journal of Computer Applications in Technology.
Canonical Particle Swarm Optimization Algorithm Based a Hybrid Vehicle.- Control of Robot Manipulators using Modified Backstepping Sliding Mode.- Robot Manipulator Control using Backstepping with Lagrange's Extrapolation and PI Compensator.- Cloud Robotics : Opening a new road to the Industry 4.0.- Cable-Driven Parallel Robot Modelling for Rehabilitation Use.- Nonlinear Observer-Based Fault Detection and Isolation for a Manipulator Robot.- Digital stabilizing and control for two-wheeled robot.- Mobile Robot Path Planning based on Optimized Fuzzy Logic Controllers.- 4×2D Visual Servoing Approach for Advanced Robot Applications.- A Redundant Parallel Robotic Machining Tool: Design, Control and Real-Time Experiments.- Design and Implementation of a Reactive Navigation System for a Smart Robot Using Udoo Quad.- Backstepping-Based Nonlinear RISE Feedback Control for an underactuated Quadrotor UAV without Linear Velocity Measurements.- Area Coverage Algorithms for Networked Multi-Robot Systems.- Cartesian Sliding Mode Control of an Upper Extremity Exoskeleton Robot for Rehabilitation.- Crone controller design for a position servo used in robotics.
Canonical Particle Swarm Optimization Algorithm Based a Hybrid Vehicle.- Control of Robot Manipulators using Modified Backstepping Sliding Mode.- Robot Manipulator Control using Backstepping with Lagrange's Extrapolation and PI Compensator.- Cloud Robotics : Opening a new road to the Industry 4.0.- Cable-Driven Parallel Robot Modelling for Rehabilitation Use.- Nonlinear Observer-Based Fault Detection and Isolation for a Manipulator Robot.- Digital stabilizing and control for two-wheeled robot.- Mobile Robot Path Planning based on Optimized Fuzzy Logic Controllers.- 4×2D Visual Servoing Approach for Advanced Robot Applications.- A Redundant Parallel Robotic Machining Tool: Design, Control and Real-Time Experiments.- Design and Implementation of a Reactive Navigation System for a Smart Robot Using Udoo Quad.- Backstepping-Based Nonlinear RISE Feedback Control for an underactuated Quadrotor UAV without Linear Velocity Measurements.- Area Coverage Algorithms for Networked Multi-Robot Systems.- Cartesian Sliding Mode Control of an Upper Extremity Exoskeleton Robot for Rehabilitation.- Crone controller design for a position servo used in robotics.