Pulkit Kumar, Harpreet Kaur Channi

Power System Load Flow Analysis

• Broschiertes Buch

Produktbeschreibung

Bulk electrical power is generated by three main methods: hydro sources, thermal stations and geo-thermal generating stations. Off grid (Isolated power supplies) are obtained from diesel engine driven generators. Others are cogeneration and wind. The power is generated at 11kV and is stepped up to high voltages of 220kV and 132 kV for transmission. The transmission voltages are to a large extent determined by system loss considerations. High voltage transmission requires conductors of larger cross-section which results in lower resistances, hence less energy losses on transmission lines. The load Centre's are usually located away from generating stations. Therefore, the power is transmitted to the load Centre's where it is stepped down to 66kV or 33kV, the distribution level. The load demand determines the voltage at which power is to be supplied. The loads may be residential, industrial or commercial which brings about the peak load and off peak load hours. Power is transmitted from low demand areas to high load demand in the grid network.

Produktdetails

• Verlag: LAP Lambert Academic Publishing
• Seitenzahl: 64
• Erscheinungstermin: 19. September 2023
• Englisch
• Abmessung: 220mm x 150mm x 4mm
• Gewicht: 113g
• ISBN-13: 9786206785743
• ISBN-10: 6206785742
• Artikelnr.: 69150757

Autorenporträt

Pulkit Kumar é bolseiro de investigação no Departamento de Engenharia Eléctrica da Universidade de Chandigarh, Mohali, Punjab.Dr.Harpreet Kaur Channi Departamento de Engenharia Eléctrica, Universidade de Chandigarh, Mohali, Punjab.