Andere Kunden interessierten sich auch für
![Tensile Stress Rupture Behavior of a Woven Ceramic Matrix Composite in Humid Environments at Intermediate Temperature]( "Tensile Stress Rupture Behavior of a Woven Ceramic Matrix Composite in Humid Environments at Intermediate Temperature")
Tensile Stress Rupture Behavior of a Woven Ceramic Matrix Composite in Humid Environments at Intermediate Temperature62,99 €![Creep-Rupture Behavior of a Woven Ceramic Matrix Composite at Elevated Temperatures in a Humid Environment]( "Creep-Rupture Behavior of a Woven Ceramic Matrix Composite at Elevated Temperatures in a Humid Environment")
Creep-Rupture Behavior of a Woven Ceramic Matrix Composite at Elevated Temperatures in a Humid Environment60,99 €![Characterization of Compressive Creep Behavior of Oxide/Oxide Composite with Monazite Coating at Elevated Temperature]( "Characterization of Compressive Creep Behavior of Oxide/Oxide Composite with Monazite Coating at Elevated Temperature")
Characterization of Compressive Creep Behavior of Oxide/Oxide Composite with Monazite Coating at Elevated Temperature60,99 €![Effect of Temperature and Steam Environment on Fatigue Behavior of an Oxide-Oxide Continuous Fiber Ceramic Composite]( "Effect of Temperature and Steam Environment on Fatigue Behavior of an Oxide-Oxide Continuous Fiber Ceramic Composite")
Effect of Temperature and Steam Environment on Fatigue Behavior of an Oxide-Oxide Continuous Fiber Ceramic Composite63,99 €![Strain Rate Dependent Deformation and Strength Modeling of a Polymer Matrix Composite Utilizing a Micromechanics Approach]( "Strain Rate Dependent Deformation and Strength Modeling of a Polymer Matrix Composite Utilizing a Micromechanics Approach")
Strain Rate Dependent Deformation and Strength Modeling of a Polymer Matrix Composite Utilizing a Micromechanics Approach63,99 €![Creep Performance of Oxide Ceramic Fiber Materials at Elevated Temperature in Air and in Steam]( "Creep Performance of Oxide Ceramic Fiber Materials at Elevated Temperature in Air and in Steam")
Creep Performance of Oxide Ceramic Fiber Materials at Elevated Temperature in Air and in Steam63,99 €![Creep Behavior of an Oxide/Oxide Composite with Monazite Coating at Elevated Temperatures]( "Creep Behavior of an Oxide/Oxide Composite with Monazite Coating at Elevated Temperatures")
Creep Behavior of an Oxide/Oxide Composite with Monazite Coating at Elevated Temperatures61,99 €
Advanced aerospace structures and components require materials that exhibit high strength at high operating temperatures. Nextel " 720/Alumina (N720/A) is an oxide/oxide, porous-matrix ceramic-matrix composite developed for load bearing applications at elevated temperatures. The current research investigates the rate dependence of tensile properties of the N720/A CMC at 1200-C as well as the creep behavior of this composite under applied stresses in the 1-25 MPa range. In addition, influence of prior loading rate on the creep response of N720/A under applied stresses above 50 MPa was evaluated at 1200-C. Tensile tests conducted at loading rate of 0.0025 and 25 MPa/s revealed a strong influence of rate on the ultimate tensile strength, elastic modulus and failure strain. Several samples subjected to additional heat-treatments were tested to ascertain whether the stress-strain behavior observed in the 0-30 MPa stress range in tests conducted at 0.0025 MPa/s was an artifact of incomplete processing of fibers in the as-received material. Additional heat treatment had no effect on stress-strain behavior at 0.0025 MPa/s.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.