Recent Advances in Photovoltaics: Volume 1771
Herausgeber: Gloeckler, Markus; Andersson, Mats; Zhu, Kai; Mora-Seró, Ivan; Miyasaka, Tsutomu; Kim, Jin Young; Yan, Yanfa; Yamada, Akira; Tiwari, Ayodhya N; Wang, Qi; Tao, Meng; Mastro, Michael; Li, Tingkai; Vandewal, Koen; Palomares, Emilio; Manca, Jean V
Recent Advances in Photovoltaics: Volume 1771
Herausgeber: Gloeckler, Markus; Andersson, Mats; Zhu, Kai; Mora-Seró, Ivan; Miyasaka, Tsutomu; Kim, Jin Young; Yan, Yanfa; Yamada, Akira; Tiwari, Ayodhya N; Wang, Qi; Tao, Meng; Mastro, Michael; Li, Tingkai; Vandewal, Koen; Palomares, Emilio; Manca, Jean V
- Gebundenes Buch
- Merkliste
- Auf die Merkliste
- Bewerten Bewerten
- Teilen
- Produkt teilen
- Produkterinnerung
- Produkterinnerung
The symposia that have been combined to compose this volume were held from April 6-10 at the 2015 MRS Spring Meeting.
Andere Kunden interessierten sich auch für
- Materials Technology for the Energy and Environmental Nexus, Volume 1214,99 €
- Nanostructured Materials for Photoelectrochemical Water Splitting214,99 €
- Thermodynamic Cycles for Renewable Energy Technologies214,99 €
- Chenghui ZhangVariable Gain Control and Its Applications in Energy Conversion204,99 €
- Sustainable Nanomaterials for Energy Applications206,99 €
- Sadik Kaka‡ / Arthur E. Bergles / F. Mayinger / Hafit Yüncü (Hgg.)Heat Transfer Enhancement of Heat Exchangers373,99 €
- Rainer ZüstNo More Muddling Through124,99 €
-
-
-
The symposia that have been combined to compose this volume were held from April 6-10 at the 2015 MRS Spring Meeting.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Produktdetails
- Produktdetails
- Verlag: Materials Research Society
- Seitenzahl: 244
- Erscheinungstermin: 1. Februar 2016
- Englisch
- Abmessung: 238mm x 158mm x 18mm
- Gewicht: 463g
- ISBN-13: 9781605117485
- ISBN-10: 160511748X
- Artikelnr.: 44578118
- Verlag: Materials Research Society
- Seitenzahl: 244
- Erscheinungstermin: 1. Februar 2016
- Englisch
- Abmessung: 238mm x 158mm x 18mm
- Gewicht: 463g
- ISBN-13: 9781605117485
- ISBN-10: 160511748X
- Artikelnr.: 44578118
Part I. Advance Solar Cells-Components to Systems: 1. Advanced functional
materials: intrinsic and doped silicon oxide; 2. Effect of N doped
amorphous layer between microcrystalline I/N layer on the performance of
micromorph tandem solar cells; 3. Comprehensive modelling and sizing of PV
systems from location to load; 4. Key technologies of heterojunction solar
cell and module manufacturing; 5. An overview of the Australian Centre for
Advanced Photovoltaics and the Australia-US Institute for Advanced
Photovoltaics; 6. Light emitting diodes in the experimental practice for
the characterization of novel photovoltaics; 7. Solar powered infotainment
spot: design, feasibility study and fabrication of an autonomous PV system;
8. Cu migration and its impact on the metastable behavior of CdTe solar
cells; 9. Antireflection coatings for solar panel power output enhancement;
10. ZnO:B thin films made by two-step growth method; 11. European metrology
project for III-V materials based high efficiency multi-junction solar
cells; 12. Thin film silicon solar module encapsulation technology
research; 13. The development and application of high-efficiency low-cost
silicon thin film solar cell; 14. A new method of fabrication for
multicolor transparent thin-film solar cell module; 15. The application of
infrared thermo-camera in testing of silicon-based thin-film solar cells;
Part II. Thin Film Compound Semiconductor Photovoltaics: 16. Theoretical
and experimental investigation of the recombination reduction at surface
and grain boundaries in Cu(In,Ga)Se2 solar cells by valence band control;
17. Incorporation of Cd1-x Mgx Te as an electron reflector for cadmium
telluride photovoltaic cells; 18. Extracting mobility-lifetime product in
solar cell absorbers using quantum efficiency analysis; 19. Advanced
flexible CIGS solar cells enhanced by broadband nanostructured
antireflection coatings; 20. Optical characterization of solution prepared
Cu2SnS3 for photovoltaic applications; 21. Characterization of
electron-induced defects in Cu (In, Ga) Se2 thin films by
photoluminescence; 22. Alternative etching for improved Cu-rich CuInSe2
solar cells; Part III. Perovskite Solar Cells: 23. Interface and
nanostructural engineering of low-cost, efficient and stable perovskite
solar cells; 24. The effect of titanium oxide substrate on the film
morphology and photoluminescence properties of organometal halide
perovskites; 25. High crystalline quality perovskite thin films prepared by
a novel hybrid evaporation/CVD technique; 26. Long-term stability of mixed
perovskites; Part IV. Organic-Based Photovoltaics: 27. Low-temperature
processed hybrid organic/silicon solar cells with power conversion
efficiency up to 6.5%; 28. Non-aqueous PEDOT:PSS dispersion for improved
inverted organic solar cells; 29. Novel linear and hyperbranched
polythiophene derivatives containing diketopyrrolopyrroles as linking
groups; 30. Interface and nanostructural engineering of low-cost, efficient
and stable perovskite solar cells-corrigendum.
materials: intrinsic and doped silicon oxide; 2. Effect of N doped
amorphous layer between microcrystalline I/N layer on the performance of
micromorph tandem solar cells; 3. Comprehensive modelling and sizing of PV
systems from location to load; 4. Key technologies of heterojunction solar
cell and module manufacturing; 5. An overview of the Australian Centre for
Advanced Photovoltaics and the Australia-US Institute for Advanced
Photovoltaics; 6. Light emitting diodes in the experimental practice for
the characterization of novel photovoltaics; 7. Solar powered infotainment
spot: design, feasibility study and fabrication of an autonomous PV system;
8. Cu migration and its impact on the metastable behavior of CdTe solar
cells; 9. Antireflection coatings for solar panel power output enhancement;
10. ZnO:B thin films made by two-step growth method; 11. European metrology
project for III-V materials based high efficiency multi-junction solar
cells; 12. Thin film silicon solar module encapsulation technology
research; 13. The development and application of high-efficiency low-cost
silicon thin film solar cell; 14. A new method of fabrication for
multicolor transparent thin-film solar cell module; 15. The application of
infrared thermo-camera in testing of silicon-based thin-film solar cells;
Part II. Thin Film Compound Semiconductor Photovoltaics: 16. Theoretical
and experimental investigation of the recombination reduction at surface
and grain boundaries in Cu(In,Ga)Se2 solar cells by valence band control;
17. Incorporation of Cd1-x Mgx Te as an electron reflector for cadmium
telluride photovoltaic cells; 18. Extracting mobility-lifetime product in
solar cell absorbers using quantum efficiency analysis; 19. Advanced
flexible CIGS solar cells enhanced by broadband nanostructured
antireflection coatings; 20. Optical characterization of solution prepared
Cu2SnS3 for photovoltaic applications; 21. Characterization of
electron-induced defects in Cu (In, Ga) Se2 thin films by
photoluminescence; 22. Alternative etching for improved Cu-rich CuInSe2
solar cells; Part III. Perovskite Solar Cells: 23. Interface and
nanostructural engineering of low-cost, efficient and stable perovskite
solar cells; 24. The effect of titanium oxide substrate on the film
morphology and photoluminescence properties of organometal halide
perovskites; 25. High crystalline quality perovskite thin films prepared by
a novel hybrid evaporation/CVD technique; 26. Long-term stability of mixed
perovskites; Part IV. Organic-Based Photovoltaics: 27. Low-temperature
processed hybrid organic/silicon solar cells with power conversion
efficiency up to 6.5%; 28. Non-aqueous PEDOT:PSS dispersion for improved
inverted organic solar cells; 29. Novel linear and hyperbranched
polythiophene derivatives containing diketopyrrolopyrroles as linking
groups; 30. Interface and nanostructural engineering of low-cost, efficient
and stable perovskite solar cells-corrigendum.
Part I. Advance Solar Cells-Components to Systems: 1. Advanced functional
materials: intrinsic and doped silicon oxide; 2. Effect of N doped
amorphous layer between microcrystalline I/N layer on the performance of
micromorph tandem solar cells; 3. Comprehensive modelling and sizing of PV
systems from location to load; 4. Key technologies of heterojunction solar
cell and module manufacturing; 5. An overview of the Australian Centre for
Advanced Photovoltaics and the Australia-US Institute for Advanced
Photovoltaics; 6. Light emitting diodes in the experimental practice for
the characterization of novel photovoltaics; 7. Solar powered infotainment
spot: design, feasibility study and fabrication of an autonomous PV system;
8. Cu migration and its impact on the metastable behavior of CdTe solar
cells; 9. Antireflection coatings for solar panel power output enhancement;
10. ZnO:B thin films made by two-step growth method; 11. European metrology
project for III-V materials based high efficiency multi-junction solar
cells; 12. Thin film silicon solar module encapsulation technology
research; 13. The development and application of high-efficiency low-cost
silicon thin film solar cell; 14. A new method of fabrication for
multicolor transparent thin-film solar cell module; 15. The application of
infrared thermo-camera in testing of silicon-based thin-film solar cells;
Part II. Thin Film Compound Semiconductor Photovoltaics: 16. Theoretical
and experimental investigation of the recombination reduction at surface
and grain boundaries in Cu(In,Ga)Se2 solar cells by valence band control;
17. Incorporation of Cd1-x Mgx Te as an electron reflector for cadmium
telluride photovoltaic cells; 18. Extracting mobility-lifetime product in
solar cell absorbers using quantum efficiency analysis; 19. Advanced
flexible CIGS solar cells enhanced by broadband nanostructured
antireflection coatings; 20. Optical characterization of solution prepared
Cu2SnS3 for photovoltaic applications; 21. Characterization of
electron-induced defects in Cu (In, Ga) Se2 thin films by
photoluminescence; 22. Alternative etching for improved Cu-rich CuInSe2
solar cells; Part III. Perovskite Solar Cells: 23. Interface and
nanostructural engineering of low-cost, efficient and stable perovskite
solar cells; 24. The effect of titanium oxide substrate on the film
morphology and photoluminescence properties of organometal halide
perovskites; 25. High crystalline quality perovskite thin films prepared by
a novel hybrid evaporation/CVD technique; 26. Long-term stability of mixed
perovskites; Part IV. Organic-Based Photovoltaics: 27. Low-temperature
processed hybrid organic/silicon solar cells with power conversion
efficiency up to 6.5%; 28. Non-aqueous PEDOT:PSS dispersion for improved
inverted organic solar cells; 29. Novel linear and hyperbranched
polythiophene derivatives containing diketopyrrolopyrroles as linking
groups; 30. Interface and nanostructural engineering of low-cost, efficient
and stable perovskite solar cells-corrigendum.
materials: intrinsic and doped silicon oxide; 2. Effect of N doped
amorphous layer between microcrystalline I/N layer on the performance of
micromorph tandem solar cells; 3. Comprehensive modelling and sizing of PV
systems from location to load; 4. Key technologies of heterojunction solar
cell and module manufacturing; 5. An overview of the Australian Centre for
Advanced Photovoltaics and the Australia-US Institute for Advanced
Photovoltaics; 6. Light emitting diodes in the experimental practice for
the characterization of novel photovoltaics; 7. Solar powered infotainment
spot: design, feasibility study and fabrication of an autonomous PV system;
8. Cu migration and its impact on the metastable behavior of CdTe solar
cells; 9. Antireflection coatings for solar panel power output enhancement;
10. ZnO:B thin films made by two-step growth method; 11. European metrology
project for III-V materials based high efficiency multi-junction solar
cells; 12. Thin film silicon solar module encapsulation technology
research; 13. The development and application of high-efficiency low-cost
silicon thin film solar cell; 14. A new method of fabrication for
multicolor transparent thin-film solar cell module; 15. The application of
infrared thermo-camera in testing of silicon-based thin-film solar cells;
Part II. Thin Film Compound Semiconductor Photovoltaics: 16. Theoretical
and experimental investigation of the recombination reduction at surface
and grain boundaries in Cu(In,Ga)Se2 solar cells by valence band control;
17. Incorporation of Cd1-x Mgx Te as an electron reflector for cadmium
telluride photovoltaic cells; 18. Extracting mobility-lifetime product in
solar cell absorbers using quantum efficiency analysis; 19. Advanced
flexible CIGS solar cells enhanced by broadband nanostructured
antireflection coatings; 20. Optical characterization of solution prepared
Cu2SnS3 for photovoltaic applications; 21. Characterization of
electron-induced defects in Cu (In, Ga) Se2 thin films by
photoluminescence; 22. Alternative etching for improved Cu-rich CuInSe2
solar cells; Part III. Perovskite Solar Cells: 23. Interface and
nanostructural engineering of low-cost, efficient and stable perovskite
solar cells; 24. The effect of titanium oxide substrate on the film
morphology and photoluminescence properties of organometal halide
perovskites; 25. High crystalline quality perovskite thin films prepared by
a novel hybrid evaporation/CVD technique; 26. Long-term stability of mixed
perovskites; Part IV. Organic-Based Photovoltaics: 27. Low-temperature
processed hybrid organic/silicon solar cells with power conversion
efficiency up to 6.5%; 28. Non-aqueous PEDOT:PSS dispersion for improved
inverted organic solar cells; 29. Novel linear and hyperbranched
polythiophene derivatives containing diketopyrrolopyrroles as linking
groups; 30. Interface and nanostructural engineering of low-cost, efficient
and stable perovskite solar cells-corrigendum.