Tadeusz Burakowski, Tadeusz Wierzchon

Surface Engineering of Metals

Principles, Equipment, Technologies

• Broschiertes Buch

Produktbeschreibung

Surface Engineering of Metals provides basic definitions of classical and modern surface treatments, addressing mechanisms of formation, microstructure, and properties of surface layers. It discusses the range of surface engineering techniques and describes new surface treatments. Part I outlines the fundamentals of surface engineering, presents the history of its development, and proposes a two-category classification of surface layers. Part II provides an original classification of the technologies of surface layers.

---

Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.

Produktdetails

• Verlag: CRC Press
• Seitenzahl: 610
• Erscheinungstermin: 30. September 2020
• Englisch
• Abmessung: 234mm x 156mm x 33mm
• Gewicht: 913g
• ISBN-13: 9780367400125
• ISBN-10: 036740012X
• Artikelnr.: 60009004

Autorenporträt

Burakowski, Tadeusz; Wierzchon, Tadeusz

Inhaltsangabe

Part i. General Fundamentals of Surface Engineering
1. The concept of surface engineering
1.1 The term "surface engineering"
1.2 Scope of topics forming the concept of surface engineering
References
2. Development of surface engineering
2.1 History of development of surface engineering
2.1.1 General laws of development
2.1.2 History of development of metallic structural materials
2.1.3 History of development of the technology of
surface improvement of structural materials
2.2 Surface engineering today
2.2.1 General areas of activity of surface engineering
2.2.2 Significance of surface engineering
2.3 Directions of development of surface engineering
2.3.1 Perfection and combination of methods of manufacturing of surface layers
2.3.2 Design of surface layers, based on mathematical modeling
2.3.3 Micro and nanometric testing
2.3.4 Rational application of surface layers
References
3. The solid surface
3.1 The significance of the surface
3.2 The surface
geometrical concept
3.3 The surface
mechanical concept
3.4 The surface
physico
chemical concept
3.4.1 The phase
3.4.2 Interphase surface
a physical surface
3.4.3 Surface energy
3.4.4 Surface phenomena
References
4. Surface layers
References
5. The superficial layer
5.1 Development of concepts regarding the superficial layer
5.2 Shaping of the superficial layer
5.3 Structure of the superficial layer
5.3.1 Simplified models of the superficial layer
5.3.2 The developed model of the superficial layer
5.4 A general characteristic of the superficial layer
obtained by machining
5.5 Physical description of the superficial layer
5.6 Strengthening and weakening of the superficial layer
5.7 Potential properties of the superficial layer
5.7.1 Geometrical parameters of the superficial layer
5.7.1.1 Three
dimensional structure of the surface
5.7.1.2 Surface roughness
5.7.1.3 Structural flaws of the three
dimensional surface
5.7.2 Stereometric
physico
chemical parameters of the superficial layer
5.7.2.1 Emissivity
5.7.2.2 Reflectivity
5.7.3 Physico
chemical parameters of the superficial layer
5.7.3.1 General characteristic
5.7.3.2 Metallographic structure
5.7.3.3 Hardness
5.7.3.4 Brittleness
5.7.3.5 Residual stresses
5.7.3.6 Absorption
5.7.3.7 Adsorption
5.7.3.8 Solubility
5.7.3.9 Diffusion
5.7.3.10 Adhesion
5.7.3.11 Catalysis
5.8 Practically usable properties of the superficial layer
5.8.1 Strength properties
5.8.1.1 General characteristic
5.8.1.2 Fatigue strength
5.8.2 Tribological properties
5.8.2.1 Types of basic tribological properties
5.8.2.2 Types of friction
5.8.2.3 Sliding friction
5.8.2.4 Rolling friction
5.8.2.5 The role of surface in the friction process
5.8.2.6 Thermal effects of friction
5.8.2.7 Lubrication
5.8.2.8 Tribological wear and its various versions
5.8.2.9 Factors affecting tribological wear
5.8.2.10 Non
wear friction (selective carryover)
5.8.2.11 Limiting tribological wear
5.8.3 Anti
corrosion properties
5.8.4 Decorative properties
5.9 The significance of the superficial layer
References
6. Coatings
6.1 The concept of the coatings
6.2 Structure of the coating
6.3 Types of coatings
6.3.1 Division of coatings by material
6.3.1.1 Metallic coatings
6.3.1.2 Non
metallic coatings
6.3.2 Classification of coatings by application
6.3.2.1 Protective coatings
6.3.2.2 Decorative coatings
6.3.2.3 Protective
decorative coatings
6.3.2.4 Technical coatings
6.3.3 Classification of coatings by manufacturing methods
6.3.3.1 Galvanizing
6.33.2 Immersion coatings
6.3.3.3 Spray coatings
6.3.3.4 Cladded coatings
6.3.3.5 Crystallizing coatings
6.4 Potential properties of coatings
6.4.1 Geometrical parameters of coatings
6.4.1.1 Thickness
6.4.1.2 Three
dimensional structure of the surface
6.4.1.3 Surface unevenness
6.4.1.4 Defects of the three
dimensional structure
6.4.2 Geometric and physico
chemical parameters of coatings
6.4.3 Physico
chemical parameters of coatings
6.4.3.1 General characteristic
6.4.3.2 Structure of metallic coatings
6.4.3.3 Residual stresses
6.4.3.4 Adhesion
6.4.3.5 Hardness
6.4.3.6 Ductility (elasticity)
6.4.3.7 Electrical properties
6.4.3.8 Magnetic properties
6.5 Service properties of coatings
6.5.1 Anti
corrosion properties
6.5.1.1 Types of corrosion
6.5.1.2 Corrosion resistance
6.5.1.3 Porosity
6.5.1.4 Bulging
6.5.1.5 Permeability
6.5.2 Decorative properties
6.5.2.1 External appearance
6.5.2.2 Color
6.5.2.3 Luster
6.5.2.4 Coverability
6.5.2.5 Specific decorative properties
6.6 Significance and directions of development of coatings
References
Part ii. The newest techniques of producing surface layers
1. Formation of technological surface layers
1.1 Techniques of formation of technological surface layers
1.1.1 Mechanical techniques
1.1.2 Thermo
mechanical techniques
1.1.3 Thermal techniques
1.1.4 Thermo
chemical techniques
1.1.5 Electrochemical and chemical techniques
1.1.6 Physical techniques
1.2 Classification of techniques of producing technological surface layers
References
2. Electron beam technology
2.1 Advent and development of electron beam technology
2.2 Physical principles underlying the functioning
of electron beam equipment
2.2.1 Electron emission
2.2.2 Thermoelectron emission
2.2.3 Utilization of plasma as a source of electrons
2.2.4 Acceleration of electrons
2.2.5 Electron beam control
2.2.6 Vacuum in electron equipment
2.3 Electron beam heaters
2.3.1 Electron guns
2.3.1.1 Thermal emission guns
2.3.1.2 Plasma emission guns
2.3.2 Design of electron beam heaters
2.3.3 Types of beams and patterns
2.4 Physical fundamentals of interaction of electron beam with treated material
2.4.1 Mechanism of interaction of electron beam with treated material
2.4.2 Efficiency of electron beam heating
2.4.3 Rate of heating and cooling
2.5 Electron beam techniques
2.5.1 Remelt
free techniques
2.5.1.1 Annealing and tempering
2.5.1.2 Remelt
free hardening
2.5.2 Remelt techniques
2.5.2.1 Surface remelting
2.5.2.2 Alloying
2.52.3 Cladding
2.5.3 Evaporation techniques
2.5.4 Applications of electron beam heating in surface engineering
References
3. Laser technology
3.1 Development of laser technology
3.2 Physical fundamentals of lasers
3.2.1 Spontaneous and stimulated emission
3.2.2 Laser action
3.2.2.1 Inversion of occupation of energy levels
3.2.2.2 Optical resonator
3.2.3 Single
mode and multi
mode laser beams
3.3 Lasers and laser heaters
3.3.1 General design of lasers
3.3.2 Molecuar C02 lasers
3.3.2.1 General characteristic
3.3.2.2 Lasers with slow longitudinal flow (diffusion cooled)
3.3.2.3 Lasers with fast longitudinal flow
3.3.2.4 Lasers with transverse flow
3.3.3 Solid Nd
YAG lasers
3.3.4 Continuous and pulse laser operation
3.3.5 Laser heaters and machinetools
3.4 Physical fundamentals of laser heating
3.4.1 Properties of laser heating
3.4.2 The role surface absorption in laser heating
3.4.3 Depth of penetration of photons into the metal
3.4.4 Laser heating stages
3.4.5 Temperature distribution in laser
heated material
3.4.6 Laser beam control
3.5 Laser techniques
3.5.1 Remelting
free techniques
3.5.1.1 Annealing and tempering, preheating
3.5.1.2 Remelt
free hardening
3.5.1.3 Surface cleaning
3.5.2 Remelting techniques
3.5.2.1 Surface remelting
3.5.2.2 Alloying
3.5.2.3 Cladding
3.5.3 Evaporation techniques
3.5.3.1 Pure evaporation
3.5.3.2 Detonation hardening
3.5.3.3 Ablation cleaning
3.5.4 Laser techniques for formation of thin and hard coatings
3.5.4.1 Coating formation by the fusion alloying in gas method
3.5.4.2 Formation of coatings by the pure vapour deposition method
3.5.4.3 Pyrolytic and photochemical formation of coatings
3.5.4.4 Format