Justin Kurk

Surface Topography Effects on Metal Flow During Hot Compression

• Broschiertes Buch

Produktbeschreibung

An investigation was conducted to study the effects of die surface topography, specifically surface roughness and lay, on metal flow and the friction factor under lubricated hot compression. 6061-T6 aluminum rings and square bar stock specimens were compressed on H-13 tool steel platens machined with a unidirectional lay pattern to six different roughnesses between a R 10 and 240 miin. A hydraulic press mounted with an experimental die set was used for all testing. Repeated trials were conducted using high temperature vegetable oil and boron nitride lubricants. Metal flow was quantified as a function of surface roughness, lay orientation, and die temperature. Approximate plane strain cigar test specimens were compressed at platen temperatures of 300 °F and 400 °F and at orientations of 0°, 45°, and 90° between the longitudinal axis and unidirectional platen surface lay. The friction factor was assessed using ring compression tests under varying platen roughness conditions and dietemperatures between 250 °F and 400 °F. Results indicate metal flow is optimized at low platen roughnesses and parallel surface lay orientations of the platen. Temperature was not found to be influential.

---

Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.

Produktdetails

• Verlag: LAP Lambert Academic Publishing
• Seitenzahl: 128
• Erscheinungstermin: 31. März 2016
• Englisch
• Abmessung: 220mm x 150mm x 8mm
• Gewicht: 209g
• ISBN-13: 9783659862854
• ISBN-10: 3659862851
• Artikelnr.: 44930857

Autorenporträt

Education: B.S. Mechanical Engineering, May 2013, Marquette University, Milwaukee, WIM.S. Mechanical Engineering, January 2016, Marquette University, Milwaukee, WIPublications:¿Shedding Light on Infrared Pyrometers Part I & II.¿ FORGE MagazinePresentations:¿Best Practices in Temperature Measurement on the Shop Floor.¿