Andere Kunden interessierten sich auch für
![Effect of Uneven Cooling on Performance of Air-Cooled Condenser]( "Effect of Uneven Cooling on Performance of Air-Cooled Condenser")
Effect of Uneven Cooling on Performance of Air-Cooled Condenser17,95 €![Air-Cooled Condenser Operation under Varying Ambient Conditions]( "Air-Cooled Condenser Operation under Varying Ambient Conditions")
Air-Cooled Condenser Operation under Varying Ambient Conditions18,95 €![Thermohydraulic Comparison of Fin Tubes]( "Thermohydraulic Comparison of Fin Tubes")
Thermohydraulic Comparison of Fin Tubes17,95 €![Effect of Fouling on Performance of Exchangers Cooled by Air. Ramifications for Exchanged Heat and Cooling Effectiveness]( "Effect of Fouling on Performance of Exchangers Cooled by Air. Ramifications for Exchanged Heat and Cooling Effectiveness")
Effect of Fouling on Performance of Exchangers Cooled by Air. Ramifications for Exchanged Heat and Cooling Effectiveness17,95 €![Drop in replacement of R134a with R1234yf in domestic refrigerator]( "Drop in replacement of R134a with R1234yf in domestic refrigerator")
Drop in replacement of R134a with R1234yf in domestic refrigerator32,99 €![Design and Operation of Heat Exchangers]( "Design and Operation of Heat Exchangers")
Design and Operation of Heat Exchangers81,99 €![Study of Different Types of Solar Still & Performance Test]( "Study of Different Types of Solar Still & Performance Test")
Study of Different Types of Solar Still & Performance Test29,99 €
Scientific Essay from the year 2018 in the subject Physics - Thermodynamics, , language: English, abstract: Vacuum tightness is critical for air-cooled condensers operating at low absolute pressure. Low vacuum is aimed for because vacuum dominates the power plant efficiency. To verify vacuum tightness usually a vacuum drop test is made with the system empty at normal atmospheric temperature and free of any liquids. This test is done before commissioning of the power unit and generally follows the recommendations of the Heat Exchanger Institute (HEI) as outlined in §6.1.1 of "Standards for Steam Jet Vacuum Systems".However, over time of operation the power plant may develop leakages, which were not present at the time of the original drop test. This calls for a tightness test at operating conditions where pre-conditions for the standard vacuum drop test are not fulfilled. The report describes a vacuum drop test without interfering too much into normal power plant operation. The test is suitable for stationary operating conditions using standard operation readings. The assessment of leakage flow is based on the measured vacuum decay rate. It is shown that vacuum decay rates taken from tests before and after commissioning are different. Contractual fixing of acceptable vacuum decay rates should therefore be treated with care. Example graphs for easy evaluation are given.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.