139,09 €
inkl. MwSt.
Sofort per Download lieferbar
  • Format: PDF

During heat treatment in dairy production, the rapid formation of heat-induced fouling deposits on the plant surface leads to reduced efficiency of heat transfer. Therefore, a regular cleaning process is required to soften the heat-induced protein deposits and then remove them from the plant surface. The mechanical property of the deposits is one of the key issues of the cleaning mechanisms since the non-fractured behaviour dominates the deformation of the fouling layer and the failure behaviour has a great impact on the cohesive removal of fouling deposits. Considering the complicated…mehr

Produktbeschreibung
During heat treatment in dairy production, the rapid formation of heat-induced fouling deposits on the plant surface leads to reduced efficiency of heat transfer. Therefore, a regular cleaning process is required to soften the heat-induced protein deposits and then remove them from the plant surface. The mechanical property of the deposits is one of the key issues of the cleaning mechanisms since the non-fractured behaviour dominates the deformation of the fouling layer and the failure behaviour has a great impact on the cohesive removal of fouling deposits. Considering the complicated geometry of fouling deposits and their irregular distribution, indentation experiments were carried out on various kinds of protein deposits. The experimental results reveal the significant influence of the thickness of fouling deposits on their mechanical behaviour and the time-dependent nonlinear behaviour of the deposits.

Furthermore, heat-induced whey protein gel was used as the modelmaterial for fouling deposits and the non-fractured and fracture behaviour was characterized using compression and wire cutting experiments, respectively. The material parameters identified using the inverse finite element method allow the prediction of fracture behaviour under localized external loads and provide a deeper insight into cohesive removal. To investigate the softening effect during caustic washing, tensile experiments were conducted on chemically treated and untreated whey protein gels. Adequate chemical degradation leads to a softer mechanical response and increased stress relaxation, making whey protein gels more flowable and more resistant to tensile deformation. The experimental results provide useful data on the failure behaviour of chemically treated whey protein gels.

Autorenporträt
Jintian Liu is a scientific assistant at the Institute of Machanics and Adaptronics (IMA, TU Braunschweig).

Before finishing the dissertation in January 2022, Mr Liu was responsible for the research project "Cleaning mechanisms of immerged systems", which is supported by the Deutsche Forschungsgemeinschaft (DFG) and conducted in cooperation with the Institute for Chemical and Thermal Process Engineering (TU Braunschweig). He used the whey protein gel as a representative material model to study the mechanical properties which are relevant to the cleaning process. In addition, his work involves experimental and numerical characterization of the mechanical behaviour of milk fouling deposits. His research results were presented at the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM 2019 in Vienna.

Besides the main research, Mr Liu has modelled the material behaviour of Elymus for the assessment of ecosystemservices and experimentally characterized the mechanical strength of polymerized ionic liquids used for drug delivery systems.

Prior to his work at IMA, Mr Liu has finished the Dual Master's Degree Program supported by the German Academic Exchange Service (DAAD) under the cooperation between TU Braunschweig and Tongji University in Shanghai, China.