Emerging Fields in Sol-Gel Science and Technology (eBook, PDF)

Redaktion: Lopez, Tessy Maria; Aegerter, Michel A.; Avnir, David

• Format: PDF

Produktbeschreibung

Emerging Fields in Sol-gel Science and Technology contains selected papers from the symposium on "Sol-Gel and Vitreous Materials and Applications" held during the International Materials Research Congress in Cancún, México in August 2002. One hundred and twenty researchers representing 10 countries attended this symposium.

Some of the subjects covered in this symposium include 1.) synthesis of new materials endowed with outstanding and non-conventional optical, magnetic, electrical, thermal, catalytic, and mechanical properties; 2.) study of the sorption properties of model porous materials in order to test the validity of previous and recent theories; 3.) theoretical studies related to density functional theory, fractal and scaling law approaches, 4.) synthesis of biomaterials for use in medicine and pollution control; 5.) application of sol-gel colloids in the fine-chemistry industry in products such as fragrances and pharmaceuticals; 6.) development of special vitreous materials; 7.) implementation of inorganic thin films, and 8.) synthesis of materials for energy saving.

---

Dieser Download kann aus rechtlichen Gründen nur mit Rechnungsadresse in A, B, BG, CY, CZ, D, DK, EW, E, FIN, F, GR, HR, H, IRL, I, LT, L, LR, M, NL, PL, P, R, S, SLO, SK ausgeliefert werden.

Produktdetails

• Verlag: Springer US
• Seitenzahl: 454
• Erscheinungstermin: 27. November 2013
• Englisch
• ISBN-13: 9781461504498
• Artikelnr.: 44053210

Autorenporträt

Prof. Dr. Michel A. Aegerter graduated as Engineer and Physicist in 1962 at the Swiss Institute of Technology- EPFL, Switzerland and received his Ph.D degree (Dr. ès Sciences) in 1966 at the University of Neuchâtel, Switzerland. After post-doctoral studies at the University of Utah, Salt Lake City,USA, he joined again the University of Neuchâtel as assistant professor and then the University of Sao Paulo, Sao Carlos, Brazil as a full Professor till 1995 where he initiated research in the sol-gel field in 1984 with the collaboration of Prof. Dr. J. Zarzycki. In 1995 he accepted an invitation to be Director of the Department of Coating Technology at the Leibniz-Institute for New Materials gem. GmbH- INM in Saarbruecken, Germany, a position that he still hold. He is also Honorary Professor at the University of Saarland, Saarbruecken (Germany). He is the present Chairman of the Technical Committee TC-16 (Sol-Gel Glasses) of the International Commission on Glass (ICG), member of the Am

erican Ceramic Society, Material Research Society, SPIE, of several International Advisory Committees, of the Editorial Board of the International J. of Photochemistry, co-editor for Europe of the J. Sol-Gel Science and Technology, editorial Chairman of the International Conference on Coatings on Glass-ICCG as well as referee for several international scientific journals. His present fields of activity covers the research and industrial development of functional, conducting, photoelectrochemical and electrochromic coatings on glasses and plastics, the development of new sol-gel and nanocomposite coating technology. Prof. Dr. Aegerter is the author and co-author of more than 440 scientific publications, 8 patents and co-editor of 12 books.

Inhaltsangabe

1. Sol-gel catalyst materials.- 1.1 "Metallocene Catalysts supported on porous oxides prepared by sol-gel Technique for polymerization of olefins..- 1.2 Synthesis and Applications of Catalysts Prepared by Sol- Gel Methods.- 1.3 "Catalytic Activity of sol-gel metal and metal oxide catalysts".- 1.4 "Application of sol-gel chemistry to the preparation of sulfated oxides and hydrophobic catalysts".- 1.5 "Phenol Degradation and Photodegradation using UV-by Fe2O3 supported on AL2O3 and TiO2 prepared by sol-gel method.".- 1.6 "Catalytic expoxidation of ciclohexane on MCM-41 and Ti-MCM-41".- 1.7 "Transition Bimetallic Carbides: Synthesis and Characterization".- 1.8 "Dehydrogenation and dehydration of Isopropanol Catalyzed with sol-gel MgO-Al2O3".- 1.9 "Ceramic compounds MTiOx synthesis and photocatalytic properties".- 2. Adsorption and Porosity.- 2.1 "Engineering of ceramic microstructures for functionality"..- 2.2 "Sorption properties of mesoporous silica sol-gel vitreous substrata"..- 2.3 "Microporosity in silica syntesized by sol-gel method. Adsorption of nitrogen at 76K".- 2.4 "Aluminosilicatos of bimodal porosity prepared by hydrothermal treatment starting from hybrid composites"..- 3. Sol-gel Oxide Materials.- 3.1 "Hydrophobic silica aerogels under subcritical conditions: Preparation and characterization"..- 3.2 "Synthesis and Characterization of metal oxide nanoparticles"..- 3.3 "Contribution to the sol-gel chemistry in silica based systems".- 3.4 "Effect of precursor and ultrasound on the properties of some C60-doped sol-gel silica materials"..- 3.5 "SEM Morphological study and Trasnsparency properties of hybrid SiO2-phenolic resin materials"..- 3.6 "Effect of Yttrium on the Crystal Structure ofZrO2"..- 3.7 "Effect of alkalinous ions on the Raman Scattering spectrum of zirconia prepared by sol-gel process"..- 3.8 "Anatase-Rutile phase transformation of Cu++ doped TiO2 in a non-reducing atmosphere"..- 3.9 "Silica obtained by sol-gel processing and modified through indium incorporation"..- 3.10 "Sol-gel zirconia: Phosphate addition effect"..- 4. Mixed Oxide Materials.- 4.1 "Thermal stability and hydrolysis catalysts effect on sol-gel zirconia in the presence of heteropolyacids"..- 4.2 "Characterization of Ti-Al-Mg oxides obtained by sol-gel method and its potential application as V trap and SOx reducer"..- 4.3 "Molecular structures of WO3/Al2O3-TiO2 catalysts under controlled environment"..- 4.4 "Ternary (Mg-Zn-Al) hydrotalcites synthesis"..- 4.5 "Phase structure and thermal evolution in mixed oxides TiO2-ZrO2 powders obtained by the sol-gel process"..- 4.6 "Acid properties of pure and sulfated mixed oxides of Al2O3-TiO2 and Al2O3-ZrO2 prepared by sol-gel"..- 5. Thin Films.- 5.1 "Sol-Gel and Nanoparticle Technologies for the Development of transparent Conducting Oxide Coatings".J. Puetz.- 5.2 "Nanostructures, Magnetic Materials, Ceramics and Thin Films Probed by X-rays..- 5.3 "Hybrid sol-gel films for holographic applications"..- 5.4 "Cadmium stannate thin films prepared by sol-gel process"..- 5.5 "Characterization of TiO2 films obtained by sol-gel from Titanium isopropoxide in the presence of hydroxypropylcellulose"..- 5.6 "Photosensitive organic-inorganic Irbid films for photonic cristal using sol-gel process"..- 5.7 "Lithium cobalt oxide (LiCoO2) films obtained by different sol-gel methods"..- 6. Miscellaneous Topics.- 6.1 "Energy savings calculation for offices with electrochromic windowpanes"..- 6.2 "Thermodynamic study of component and species distributions in a one component system as a first step of sol-gel processes: The thermodynamic mechanism of polymerization"..- 6.3 "Microstructural characterization of the API X-70 pipeline steel under sour environments"..- 6.4 "Metallurgical characterization of weld bead of API X-60 and X-65 steel pipelines"..- 6.5 "On the nature of the crystalline phases which coexist with FesAl intermetallic compounds"..- 6.6 "Microestructural and Mechanical Properties in the weld bead of the API X-52 steel ipeline"..- 6.7 "EPR-Characterization of Carbon Inclusions in Boron Carabide"..- 6.8 "Biological materials for removing and recovering heavy metals"..- 6.9 "E.coli genetically modified and encapsulated in sol-gelsilica"..