The present volume contains sixteen contributed papers from the symposium, with topics including advanced coating processing, advanced coating for wear, corrosion, and oxidation resistance, and thermal and mechanical properties, highlighting the state-of-the-art ceramic coatings technologies for various critical engineering applications.
The present volume contains sixteen contributed papers from the symposium, with topics including advanced coating processing, advanced coating for wear, corrosion, and oxidation resistance, and thermal and mechanical properties, highlighting the state-of-the-art ceramic coatings technologies for various critical engineering applications.Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Produktdetails
Produktdetails
Ceramic Engineering and Science Proceedings Vol.31
Dongming Zhu is a senior Materials Research Engineer at Army Research Laboratory, Vehicle Technology Directorate, and Durability and Protective Coatings Branch of Structures and Materials Division, at NASA Glenn Research Center. His expertise covers the areas of thermal conductivity, lattice defects and transport, high temperature oxidation, high-heat-flux testing, and mechanical behavior of ceramic coating systems, with an emphasis on experimental investigation and analytical modeling of processing, thermal fatigue and fracture behavior of advanced protective coatings and composites. His major contributions include the development of low conductivity thermal barrier coatings for turbine airfoil applications, 1650°C thermal/environmental barrier coatings for SiC/SiC ceramic matrix composite turbine vane and combustor liner applications. He has authored more than 100 archival publications and three patents. He is a member of the American Ceramic Society and ASM, International, has been a lead organizer for several International Symposia. He is currently the Chair-elect of the Engineering Ceramic Division of the American Ceramic Society, and an associate editor of the International Journal of Applied Ceramic Technology. He has received several awards from NASA and professional societies. He received his Ph.D. degree in Chemical Engineering and Materials Science from the University of Minnesota in 1996.
Inhaltsangabe
Preface vii Introduction ix THERMAL AND ENVIRONMENTAL BARRIER COATINGS Kinetics and Mechanism of Oxidation of the Reinforced Carbon/Carbon on the Space Shuttle Orbiter 3 Nathan Jacobson, David Hull, James Cawley, and Donald Curry Thermomechanical Fatigue Life of TBCS-Experimental and Modeling Aspects 23 Sören Sjöström and Hakan Brodin Oxidation-Induced Stresses in Thermal Barrier Coating Systems 41 Hugh E Evans Strength Degrading Mechanisms in Plasma Spray Coated Silicon Nitride 57 Ramakrishna T. Bhatt Dennis S. Fox, and Abdul-Aziz AN Effect of Microstructure Change of APS-TBCS on the Interfacial Mechanical Property under Shear Loading 67 Makoto Hasegawa and Hiroshi Fukutomi Effect of Thermal Gradient on the Through-Thickness Thermal Conductivity of Plasma-Sprayed TBCS 75 Yang Tan, Jon Longtin, Sanjay Sampath, and Dongming Zhu Thermal Property Measurement for Thermal Barrier Coatings by Thermal Imaging Method 87 J. G. Sun Research on MoSi2-Based Oxidation Protective Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying 95 Cao Wei, Li Hejun.Wu Heng, Xue Hui, Fu Qiangang, Ma Chao, Wang Yongjie, and Wei Jianfeng ADVANCED COATINGS FOR WEAR AND CORROSION APPLICATIONS 105 LAFAD-Assisted Plasma Surface Engineering Processes for Wear and Corrosion Protection: A Review 105 V. Gorokhovsky Aluminum Oxide and Silicon Nitride Thin Films as Anti-Corrosion Layers 123 C. Qu, P. Li, J. Fan, D. Edwards, W. Schulze, G. Wynick, R. E. Miller, L. Lin, Q. Fang, K. Bryson, H. Rubin, and X. W. Wang Plasma Nitrided Austenitic Stainless Steel for Biomedical 135 Applications 135 O. Gokcekaya, S. Yilmaz, C. Ergun, B. Kaya, and O. Yücel A Report on the Microstructure of As-Fabricated, Heat Treated and Irradiated ZrC Coated Surrogate TRISO Particles 147 Gokul Vasudevamurthy, Yutai Katoh, Jun Aihara, Shohei Ueta, Lance L. Snead, and Kazuhiro Sawa ADVANCED COATING PROCESSING Introduction to High Velocity Suspension Flame Spraying (HVSFS) 161 R. Gadow, A. Killinger, J. Rauch, and A. Manzat Electrophoretic Deposition of Oxide Powder by Using Non-Flammable Organic Solvent 177 Hideyuki Negishi, Ai Miyamoto, Akira Endo, Keiji Sakaki, Hiroshi Yanagishita, and Kunihiro Watanabe Use of Glass-Ceramic Coatings Containing Water-Reactive Components as a Bonding Layer between Concrete and Metal 187 Charles A Weiss, Jr., Sean W. Morefield, Philip G. Malone, Karen S. Henry, Sean P. Harte, and Michael L. Koenigstein Author Index 193
Preface vii Introduction ix THERMAL AND ENVIRONMENTAL BARRIER COATINGS Kinetics and Mechanism of Oxidation of the Reinforced Carbon/Carbon on the Space Shuttle Orbiter 3 Nathan Jacobson, David Hull, James Cawley, and Donald Curry Thermomechanical Fatigue Life of TBCS-Experimental and Modeling Aspects 23 Sören Sjöström and Hakan Brodin Oxidation-Induced Stresses in Thermal Barrier Coating Systems 41 Hugh E Evans Strength Degrading Mechanisms in Plasma Spray Coated Silicon Nitride 57 Ramakrishna T. Bhatt Dennis S. Fox, and Abdul-Aziz AN Effect of Microstructure Change of APS-TBCS on the Interfacial Mechanical Property under Shear Loading 67 Makoto Hasegawa and Hiroshi Fukutomi Effect of Thermal Gradient on the Through-Thickness Thermal Conductivity of Plasma-Sprayed TBCS 75 Yang Tan, Jon Longtin, Sanjay Sampath, and Dongming Zhu Thermal Property Measurement for Thermal Barrier Coatings by Thermal Imaging Method 87 J. G. Sun Research on MoSi2-Based Oxidation Protective Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying 95 Cao Wei, Li Hejun.Wu Heng, Xue Hui, Fu Qiangang, Ma Chao, Wang Yongjie, and Wei Jianfeng ADVANCED COATINGS FOR WEAR AND CORROSION APPLICATIONS 105 LAFAD-Assisted Plasma Surface Engineering Processes for Wear and Corrosion Protection: A Review 105 V. Gorokhovsky Aluminum Oxide and Silicon Nitride Thin Films as Anti-Corrosion Layers 123 C. Qu, P. Li, J. Fan, D. Edwards, W. Schulze, G. Wynick, R. E. Miller, L. Lin, Q. Fang, K. Bryson, H. Rubin, and X. W. Wang Plasma Nitrided Austenitic Stainless Steel for Biomedical 135 Applications 135 O. Gokcekaya, S. Yilmaz, C. Ergun, B. Kaya, and O. Yücel A Report on the Microstructure of As-Fabricated, Heat Treated and Irradiated ZrC Coated Surrogate TRISO Particles 147 Gokul Vasudevamurthy, Yutai Katoh, Jun Aihara, Shohei Ueta, Lance L. Snead, and Kazuhiro Sawa ADVANCED COATING PROCESSING Introduction to High Velocity Suspension Flame Spraying (HVSFS) 161 R. Gadow, A. Killinger, J. Rauch, and A. Manzat Electrophoretic Deposition of Oxide Powder by Using Non-Flammable Organic Solvent 177 Hideyuki Negishi, Ai Miyamoto, Akira Endo, Keiji Sakaki, Hiroshi Yanagishita, and Kunihiro Watanabe Use of Glass-Ceramic Coatings Containing Water-Reactive Components as a Bonding Layer between Concrete and Metal 187 Charles A Weiss, Jr., Sean W. Morefield, Philip G. Malone, Karen S. Henry, Sean P. Harte, and Michael L. Koenigstein Author Index 193
Rezensionen
"The present volume contains sixteen contributed papers from the symposium, with topics including advanced coating processing, advanced coating for wear, corrosion, and oxidation resistance, and thermal and mechanical properties, highlighting the state-of-the-art ceramic coatings technologies for various critical engineering applications." (Azom, 25 January 2011)
Es gelten unsere Allgemeinen Geschäftsbedingungen: www.buecher.de/agb
Impressum
www.buecher.de ist ein Internetauftritt der buecher.de internetstores GmbH
Geschäftsführung: Monica Sawhney | Roland Kölbl | Günter Hilger
Sitz der Gesellschaft: Batheyer Straße 115 - 117, 58099 Hagen
Postanschrift: Bürgermeister-Wegele-Str. 12, 86167 Augsburg
Amtsgericht Hagen HRB 13257
Steuernummer: 321/5800/1497
USt-IdNr: DE450055826
