This book is a collection of papers from The American Ceramic Society s 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications and Materials for Extreme Environments symposia on topics such as Coatings to Resist Wear, Erosion and Tribological Loadings; Environmental Barrier Coatings; Functionally Graded Coatings and Interfaces; Thermal Barrier Coatings; and Ultrahigh Temperature Ceramics and Nanolaminated Ternary Carbides and Nitrides (MAX Phases).…mehr
This book is a collection of papers from The American Ceramic Society s 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications and Materials for Extreme Environments symposia on topics such as Coatings to Resist Wear, Erosion and Tribological Loadings; Environmental Barrier Coatings; Functionally Graded Coatings and Interfaces; Thermal Barrier Coatings; and Ultrahigh Temperature Ceramics and Nanolaminated Ternary Carbides and Nitrides (MAX Phases).Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Dr. Dongming Zhu is a senior materials research engineer at NASA Glenn Research Center. He is an internationally recognized leader in the area of turbine engine coating technology with over 15 years of professional experience. He has led the development of new environmental barrier coatings for future generations of turbine engines, and he has also led the development of advanced laboratory test techniques for evaluating performance of advanced turbine engine coatings. He received his B.S. and M.S. degrees in Materials Science and Engineering from Hefei University of Technology, Hefei, China. He received his Ph.D. in Chemical Engineering and Materials Science from the University of Minnesota. Hua-Tay Lin currently is a Distinguished Professor of Guangdong University of Technology, Guangzhou, China, and the Editor-in-Chief of the International Journal of Applied Ceramic Technology. He is Academician of World Academy of Ceramic, and Fellow of ASM International and the American Ceramic Society. His researches mainly focus on mechanical reliability of advanced ceramic components and electronic devices, high-temperature mechanical performance of ceramics and composites, and engineering design of microstructure and properties of ceramics and composites for clean energy and energy efficiency technologies, and coatings. Yanchun Zhou holds a BSc in ceramics from Tsinghua University, and a M.S. in ceramics and Ph.D. in metals from Institute of Metal Research, Chinese Academy of Sciences. He was a visiting scientist at the Institute of Strength Physics and Materials, Russian Academy of Sciences, and a post doctoral associate at University of Missouri-Rolla in the 1990's. He was Professor and Director of High-performance Ceramic Division, Shenyang National Laboratory for Materials Science before moving to Aerospace Research Institute of Materials and Processing Technology in 2010. He has published more than 400 papers in peer-reviewed international journals with citations of ca 11000 times and H-index of 55.
Inhaltsangabe
Preface ix Introduction xi ADVANCED COATING CHARCTERIZATION METHODSAND NON-DESTRUCTIVE EVALUATION Monitoring Delamination of Thermal Barrier Coatings during Interrupted High-Heat-Flux Laser Testing using Upconversion Luminescence Imaging 3 Jeffrey I. Eldridge and Dongming Zhu, and Douglas E. Wolfe Thermal Imaging Measurement Accuracy for Thermal Properties of Thermal Barrier Coatings 15 J. G. Sun ADVANCED COATING PROCESSING AND NANOSTRUCTURED COATING SYSTEMS High Velocity Suspension Flame Sprayed (HVSFS) Hydroxyapatite Coatings for Biomedical Applications 25 N. Stiegler, R. Gadow, and A. Killinger COATINGS TO RESIST WEAR, EROSION, AND TRIBOLOGICAL LOADINGS Ceramic/Metal-Polymer Multilayered Coatings for Tribological Applications Under Dry Sliding Conditions 39 A. Rempp, M. Widmann, P. Guth, A. Killinger, and R. Gadow Application of HVOF for High Performance Cylinder Liner Coatings 51 A. Manzat, A. Killinger, and R. Gadow Multilayer Coatings for Anti-Corrosion Applications 59 L. Lin, C. Qu, R. Kasica, Q. Fang, R. E. Miller, E. Pierce, E. Mccarty, J. H. Fan, D. D. Edwards, G. Wynick, and X. W. Wang ENVIRONMENTAL BARRIER COATINGS FOR TURBINE ENGINES AND EXTREME ENVIRONMENTS Plasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings 73 B. J. Harder and D. Zhu An Yb2Si2O7 Oxidation Resistance Coating for C/C Composites by Supersonic Plasma Spray 85 Lingjun Guo, Minna Han, Hejun Li, Kezhi Li, and Qiangang Fu FUNCTIONALLY GRADED COATINGS AND INTERFACES Development of Oxide Ceramic APS Coatings for Microwave Absorption 93 M. Floristän, P. Müller, A. Gebhardt, A. Killinger, R. Gadow, A. Cardella, and C. Li THERMAL BARRIER COATINGS Hot Corrosion of Potential Thermal Barrier Coating Material (Sm1-xYbx)2Zr2O7 by V205 and Na2SO4 109 Jia-Hu Ouyang, Sa Li, Zhan-Guo Liu, and Yu Zhou Variation of Creep Properties and Interfacial Roughness in Thermal Barrier Coating Systems 129 P. Seiler, M. Baker, and J. Rosier MATERIALS FOR EXTREME ENVIRONMENTS: ULTRA HIGH TEMPERATURE CERAMICS (UHTCS) AND NANOLAMINATED TERNARY CARBIDES AND NITRIDES (MAX PHASES) Temperature and Strain-Rate Dependent Plasticity of ZrB2 Composites from Hardness Measurements 139 J. Wang, F. Giuliani, and L.J. Vandeperre Nano-Crystalline Ultra High Temperature HfB2 and HfC Powders and Coatings Using a Sol-Gel Approach 151 S. Venugopal, A. Paul, B. Vaidhyanathan, J. Binner, A. Heaton, and P. Brown Pressureless Sintering and Hot-Pressing of Ti2AIN Powders Obtained by SHS Process 161 L. Chlubny, J. Lis, M. M. Bucko, and D. Kata Diffraction Study of Self-Recovery in Decomposed AI2Ti05 during Vacuum Annealing 169 I. M. Low and W. K. Pang Kinetics of Phase Decomposition in Ti4AIN3 and Ti2AIN--A Comparative Diffraction Study 177 W. K. Pang, R. I. Smith, V. K. Peterson, and I. M. Low Author Index 187
Preface ix Introduction xi ADVANCED COATING CHARCTERIZATION METHODSAND NON-DESTRUCTIVE EVALUATION Monitoring Delamination of Thermal Barrier Coatings during Interrupted High-Heat-Flux Laser Testing using Upconversion Luminescence Imaging 3 Jeffrey I. Eldridge and Dongming Zhu, and Douglas E. Wolfe Thermal Imaging Measurement Accuracy for Thermal Properties of Thermal Barrier Coatings 15 J. G. Sun ADVANCED COATING PROCESSING AND NANOSTRUCTURED COATING SYSTEMS High Velocity Suspension Flame Sprayed (HVSFS) Hydroxyapatite Coatings for Biomedical Applications 25 N. Stiegler, R. Gadow, and A. Killinger COATINGS TO RESIST WEAR, EROSION, AND TRIBOLOGICAL LOADINGS Ceramic/Metal-Polymer Multilayered Coatings for Tribological Applications Under Dry Sliding Conditions 39 A. Rempp, M. Widmann, P. Guth, A. Killinger, and R. Gadow Application of HVOF for High Performance Cylinder Liner Coatings 51 A. Manzat, A. Killinger, and R. Gadow Multilayer Coatings for Anti-Corrosion Applications 59 L. Lin, C. Qu, R. Kasica, Q. Fang, R. E. Miller, E. Pierce, E. Mccarty, J. H. Fan, D. D. Edwards, G. Wynick, and X. W. Wang ENVIRONMENTAL BARRIER COATINGS FOR TURBINE ENGINES AND EXTREME ENVIRONMENTS Plasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings 73 B. J. Harder and D. Zhu An Yb2Si2O7 Oxidation Resistance Coating for C/C Composites by Supersonic Plasma Spray 85 Lingjun Guo, Minna Han, Hejun Li, Kezhi Li, and Qiangang Fu FUNCTIONALLY GRADED COATINGS AND INTERFACES Development of Oxide Ceramic APS Coatings for Microwave Absorption 93 M. Floristän, P. Müller, A. Gebhardt, A. Killinger, R. Gadow, A. Cardella, and C. Li THERMAL BARRIER COATINGS Hot Corrosion of Potential Thermal Barrier Coating Material (Sm1-xYbx)2Zr2O7 by V205 and Na2SO4 109 Jia-Hu Ouyang, Sa Li, Zhan-Guo Liu, and Yu Zhou Variation of Creep Properties and Interfacial Roughness in Thermal Barrier Coating Systems 129 P. Seiler, M. Baker, and J. Rosier MATERIALS FOR EXTREME ENVIRONMENTS: ULTRA HIGH TEMPERATURE CERAMICS (UHTCS) AND NANOLAMINATED TERNARY CARBIDES AND NITRIDES (MAX PHASES) Temperature and Strain-Rate Dependent Plasticity of ZrB2 Composites from Hardness Measurements 139 J. Wang, F. Giuliani, and L.J. Vandeperre Nano-Crystalline Ultra High Temperature HfB2 and HfC Powders and Coatings Using a Sol-Gel Approach 151 S. Venugopal, A. Paul, B. Vaidhyanathan, J. Binner, A. Heaton, and P. Brown Pressureless Sintering and Hot-Pressing of Ti2AIN Powders Obtained by SHS Process 161 L. Chlubny, J. Lis, M. M. Bucko, and D. Kata Diffraction Study of Self-Recovery in Decomposed AI2Ti05 during Vacuum Annealing 169 I. M. Low and W. K. Pang Kinetics of Phase Decomposition in Ti4AIN3 and Ti2AIN--A Comparative Diffraction Study 177 W. K. Pang, R. I. Smith, V. K. Peterson, and I. M. Low Author Index 187
Es gelten unsere Allgemeinen Geschäftsbedingungen: www.buecher.de/agb
Impressum
www.buecher.de ist ein Internetauftritt der buecher.de internetstores GmbH
Geschäftsführung: Monica Sawhney | Roland Kölbl | Günter Hilger
Sitz der Gesellschaft: Batheyer Straße 115 - 117, 58099 Hagen
Postanschrift: Bürgermeister-Wegele-Str. 12, 86167 Augsburg
Amtsgericht Hagen HRB 13257
Steuernummer: 321/5800/1497
USt-IdNr: DE450055826
