This issue contains 9 papers from The American Ceramic Society's 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016. This issue includes papers presented in the 10th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (Symposium 8), Additive Manufacturing and 3D Printing Technologies (Focused Session 4), and Field Assisted Sintering (Focused Session 5).
This issue contains 9 papers from The American Ceramic Society's 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016. This issue includes papers presented in the 10th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (Symposium 8), Additive Manufacturing and 3D Printing Technologies (Focused Session 4), and Field Assisted Sintering (Focused Session 5).Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Tatsuki Ohji is a Prime Senior Research Scientist of National Institute of Advanced Industrial Science and Technology (AIST) and a Designated Professor in the Graduate School of Science and Engineering, Meijo University, Japan. He has authored or coauthored more than 330 peer-reviewed papers and 12 book chapters, edited 30 book volumes, chaired or co-chaired more than 30 international conferences and symposia, and hold more than 40 patents. Fellow of the American Association for the Advancement of Science (AAAS), the American Ceramic Society and ASM International, and Academician of the World Academy of Ceramics, he has received numerous awards including ECD Bridge Building Award of the American Ceramic Society, Academic Achievement Award of the Ceramic Society of Japan, IIM Lectureship Award of ASM International, Lee Hsun Lecture Award of IMR Chinese Academy of Sciences, and Distinguished Research Achievement Award of the Japan Society of Powder and Powder Metallurgy.
Inhaltsangabe
Preface vii Introduction ix FIELD ASSISTED SINTERING Flash Sintering of Alumina and Its Microstructural Evolution 3 Mattia Biesuz and Vincenzo M. Sglavo Enhancements on FAST Sintering Systems Promote Transfer from the Lab to Industrial Applications 11 J. Hennicke, T. Kessel, and J. Raethel Combining Flash Sintering/Sinterforging with Hybrid FAST/SPS Technology for Oxide and Non-Oxide Materials 21 J. Hennicke, T. Kessel, and J. Raethel Low Temperature Fabrication of Transparent Magnesium Aluiminate Spinel by High Pressure Spark Plasma Sintering 27 M. Sokol, S. Kalabukhov, and N. Frage ADVANCED PROCESSING AND MANUFACTURING Defect Control of SiC Polycrystalline Fiber Aiming for Higher Strength 39 Toshihiro Ishikawa and Hiroshi Oda TEM Analysis of Interfaces in Diffusion-Bonded Silicon Carbide Ceramics Joined Using Metallic Interlayers 49 T. Ozaki, Y. Hasegawa, H. Tsuda, S. Mori, M. C. Halbig, M. Singh, and R. Asthana Micro-Computed Tomography Characterization of Isotropic Filler Distribution in Magnetorheological Elastomeric Composites 57 Sneha Samal, Jarmil Vlach, Marcela Kolinova, and Pavel Kavan ADDITIVE MANUFACTURING Development of Advanced Ceramic Fuel Cells Using Additive Manufacturing Technology (I): Design and Modeling 73 Yanhai Du, Aliaa Maar, and Kai Zhao Rapid Manufacturing of Ceramic Parts 81 Wang Xiufeng, Wang Jia, Fan Xiaopu, Yu Chenglong, Jiang Hongtao, Yang Yang, Li Hui, Cao Xinqiang, and Zhang Juanjuan ADVANCED MATERIALS AND INNOVATIVE PROCESSING IDEAS FOR THE INDUSTRIAL ROOT TECHNOLOGY Nano Technology in Development of Functional Coatings 91 A.S. Khanna, Shalini Dolai, and Karanveer Aneja Tailoring the Functional Properties of Niobium Carbide 101 Mathias Woydt, Hardy Mohrbacher, Jef Vleugels, and Shuigen Huang Author Index 115
Preface vii Introduction ix FIELD ASSISTED SINTERING Flash Sintering of Alumina and Its Microstructural Evolution 3 Mattia Biesuz and Vincenzo M. Sglavo Enhancements on FAST Sintering Systems Promote Transfer from the Lab to Industrial Applications 11 J. Hennicke, T. Kessel, and J. Raethel Combining Flash Sintering/Sinterforging with Hybrid FAST/SPS Technology for Oxide and Non-Oxide Materials 21 J. Hennicke, T. Kessel, and J. Raethel Low Temperature Fabrication of Transparent Magnesium Aluiminate Spinel by High Pressure Spark Plasma Sintering 27 M. Sokol, S. Kalabukhov, and N. Frage ADVANCED PROCESSING AND MANUFACTURING Defect Control of SiC Polycrystalline Fiber Aiming for Higher Strength 39 Toshihiro Ishikawa and Hiroshi Oda TEM Analysis of Interfaces in Diffusion-Bonded Silicon Carbide Ceramics Joined Using Metallic Interlayers 49 T. Ozaki, Y. Hasegawa, H. Tsuda, S. Mori, M. C. Halbig, M. Singh, and R. Asthana Micro-Computed Tomography Characterization of Isotropic Filler Distribution in Magnetorheological Elastomeric Composites 57 Sneha Samal, Jarmil Vlach, Marcela Kolinova, and Pavel Kavan ADDITIVE MANUFACTURING Development of Advanced Ceramic Fuel Cells Using Additive Manufacturing Technology (I): Design and Modeling 73 Yanhai Du, Aliaa Maar, and Kai Zhao Rapid Manufacturing of Ceramic Parts 81 Wang Xiufeng, Wang Jia, Fan Xiaopu, Yu Chenglong, Jiang Hongtao, Yang Yang, Li Hui, Cao Xinqiang, and Zhang Juanjuan ADVANCED MATERIALS AND INNOVATIVE PROCESSING IDEAS FOR THE INDUSTRIAL ROOT TECHNOLOGY Nano Technology in Development of Functional Coatings 91 A.S. Khanna, Shalini Dolai, and Karanveer Aneja Tailoring the Functional Properties of Niobium Carbide 101 Mathias Woydt, Hardy Mohrbacher, Jef Vleugels, and Shuigen Huang Author Index 115
Es gelten unsere Allgemeinen Geschäftsbedingungen: www.buecher.de/agb
Impressum
www.buecher.de ist ein Internetauftritt der buecher.de internetstores GmbH
Geschäftsführung: Monica Sawhney | Roland Kölbl | Günter Hilger
Sitz der Gesellschaft: Batheyer Straße 115 - 117, 58099 Hagen
Postanschrift: Bürgermeister-Wegele-Str. 12, 86167 Augsburg
Amtsgericht Hagen HRB 13257
Steuernummer: 321/5800/1497
USt-IdNr: DE450055826
