Charles E. Free, Colin S. Aitchison

RF and Microwave Circuit Design

• Gebundenes Buch

Produktbeschreibung

RF and Microwave Circuit Design

Provides up-to-date coverage of the fundamentals of high-frequency microwave technology, written by two leading voices in the field

RF and Microwave Circuit Design: Theory and Applications is an authoritative, highly practical introduction to basic RF and microwave circuits. With an emphasis on real-world examples, the text explains how distributed circuits using microstrip and other planar transmission lines can be designed and fabricated for use in modern high-frequency passive and active circuits and sub-systems. The authors provide clear and accurate guidance on each essential aspect of circuit design, from the theory of transmission lines to the passive and active circuits that form the basis of modern high-frequency circuits and sub-systems.

Assuming a basic grasp of electronic concepts, the book is organized around first principles and includes an extensive set of worked examples to guide student readers with no priorgrounding in the subject of high-frequency microwave technology. Throughout the text, detailed coverage of practical design using distributed circuits demonstrates the influence of modern fabrication processes. Filling a significant gap in literature by addressing RF and microwave circuit design with a central theme of planar distributed circuits, this textbook:
_ Provides comprehensive discussion of the foundational concepts of RF and microwave transmission lines introduced through an exploration of wave propagation along a typical transmission line
_ Describes fabrication processes for RF and microwave circuits, including etched, thick-film, and thin-film RF circuits
_ Covers the Smith Chart and its application in circuit design, S-parameters, Mason???s non-touching loop rule, transducer power gain, and stability
_ Discusses the influence of noise in high-frequency circuits and low-noise amplifier design
_ Features an introduction to the design of high-frequency planar antennas
_ Contains supporting chapters on fabrication, circuit parameters, and measurements
_ Includes access to a companion website with PowerPoint slides for instructors, as well as supplementary resources

Perfect for senior undergraduate students and first-year graduate students in electrical engineering courses, RF and Microwave Circuit Design: Theory and Applications will also earn a place in the libraries of RF and microwave professionals looking for a useful reference to refresh their understanding of fundamental concepts in the field.

---

Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.

Produktdetails

• Microwave and Wireless Technologies Series
• Verlag: Wiley / Wiley & Sons
• Artikelnr. des Verlages: 1W119114630
• 1. Auflage
• Seitenzahl: 528
• Erscheinungstermin: 14. September 2021
• Englisch
• Abmessung: 279mm x 216mm x 29mm
• Gewicht: 1488g
• ISBN-13: 9781119114635
• ISBN-10: 1119114632
• Artikelnr.: 59857726

Autorenporträt

Dr. Charles E. Free was formerly a Reader in Microwave Technology at the University of Surrey, United Kingdom. He specializes in RF electronics and microwave engineering and has contributed to approximately 150 scholarly publications. Professor Colin S. Aitchison was previously Chair of the European Microwave Conference and has contributed to approximately 185 scholarly publications. He was formerly Dean of the Technology faculty at Brunel University, United Kingdom.

Inhaltsangabe

Preface

1. RF Transmission lines

1.0 Introduction

1.1 Voltage, current and impedance relationships on a transmission line

1.2 Propagation constant

1.2.1 Dispersion

1.2.2 Amplitude distortion

1.3 Lossless transmission lines

1.4 Matched and mismatched transmission lines

1.5 Waves on a transmission line

1.6 The Smith chart

1.6.1 Derivation of the chart

1.6.2 Properties of the chart

1.7 Stubs

1.8 Distributed matching circuits

1.9 Manipulation of lumped impedance using the Smith chart

1.10 Lumped impedance matching

1.10.1 Matching a complex load impedance to a real source impedance

1.10.2 Matching a complex load impedance to a complex source impedance

1.11 Equivalent lumped circuit of a lossless transmission line

1.12 Supplementary problems

1.13 Appendices

Appendix A1.1 Coaxial cable

A1.1.1 Electromagnetic field patterns in coaxial cable

A1.1.2 Essential properties of coaxial cables

Appendix A1.2 Coplanar waveguide

A1.2.1 Structure of coplanar waveguide (CPW)

A1.2.2 Electromagnetic field distribution on a CPW line

A1.2.3 Essential properties of coplanar (CPW) lines

A1.2.4 Summary of key points relating to CPW lines

Appendix A1.3 Metal waveguide

A1.3.1 Waveguide principles

A1.3.2 Waveguide propagation

A1.3.3 Rectangular waveguide modes

A1.3.4 The waveguide equation

A1.3.5 Phase and group velocities

A1.3.6 Field theory analysis of rectangular waveguides

A1.3.7 Waveguide impedance

A1.3.8 Higher-order rectangular waveguide modes

A1.3.9 Waveguide attenuation

A1.3.10 Sizes of rectangular waveguide, and waveguide designation

A1.3.11 Circular waveguide

Appendix A1.4 Microstrip

Appendix A1.5 Equivalent lumped circuit representation of a transmission line

References

2. Planar Circuit Design I: Designing using Microstrip

2.0 Introduction

2.1 Electromagnetic field distribution across a microstrip line

2.2 Effective relative permittivity,

2.3 Microstrip design graphs and CAD software

2.4 Operating frequency limitations

2.5 Skin depth

2.6 Examples of microstrip components

2.6.1 Branch-line coupler

2.6.2 Quarter-wave transformer

2.6.3 Wilkinson power divider

2.7 Microstrip coupled-line structures

2.7.1 Analysis of microstrip coupled lines

2.7.2 Microstrip directional couplers

2.7.2.1 Design of microstrip directional couplers

2.7.2.2 Directivity of microstrip directional couplers

2.7.2.3 Improvements to microstrip directional couplers

2.7.3 Examples of other common microstrip coupled-line structures

2.7.3.1 Microstrip DC break

2.7.3.2 Edge-coupled microstrip band-pass filter

2.7.3.3 Lange coupler

2.8 Summary

2.9 Supplementary problems

2.10 Appendix A2.1: Microstrip design graphs

References

3. Fabrication processes for RF and microwave circuits

3.1 Introduction

3.2 Review of essential materials parameters

3.2.1 Dielectrics

3.2.2 Conductors

3.3 Requirements for RF circuit materials

3.4 Fabrication of planar high-frequency circuits

3.4.1 Etched circuits

3.4.2 Thick-film circuits (direct screen printed)

3.4.3 Thick-film circuits (using photoima